summaryrefslogtreecommitdiff
path: root/src/conf_mode
AgeCommit message (Collapse)Author
2021-09-18dhcp-server: T1968: allow multiple static-routes to be configuredChristian Poessinger
vyos@vyos# show service dhcp-server shared-network-name LAN { subnet 10.0.0.0/24 { default-router 10.0.0.1 dns-server 194.145.150.1 lease 88 range 0 { start 10.0.0.100 stop 10.0.0.200 } static-route 192.168.10.0/24 { next-hop 10.0.0.2 } static-route 192.168.20.0/24 { router 10.0.0.2 } } }
2021-09-15ipsec: T3830: "authentication id|use-x509-id" are mutually exclusiveChristian Poessinger
Manually set peer id and use-x509-id are mutually exclusive!
2021-09-10Merge pull request #1000 from sever-sever/T3810Christian Poessinger
squid: squidguard: T3810: Fix template for sourcre-group and rule
2021-09-10squidguard: T3810: Set DB directory rigths 755Viacheslav
2021-09-10ethernet: T3802: use only one implementation for get_driver_name()Christian Poessinger
Move the two implementations to get the driver name of a NIC from ethernet.py and ethtool.py to only ethtool.py. (cherry picked from commit 07840977834816b69fa3b366817d90f44b5dc7a7)
2021-09-09policy: T3812: FRR bgpd also knows about route-maps because of rpkiChristian Poessinger
In order to alter rpki configuration we must also process the route-map nodes with/for bgpd.
2021-09-08openvpn: T3805: fix bool logic in verify_pki() for client modeChristian Poessinger
Add support for OpenVPN client mode with only the CA certificate of the server installed.
2021-09-08openvpn: T3805: drop privileges using systemd - required for rtnetlinkChristian Poessinger
2021-09-08openvpn: T3805: use vyos.util.makedir() to create system directoriesChristian Poessinger
2021-09-08openvpn: T3805: use vyos.util.write_file() to store certificatesChristian Poessinger
2021-09-06pki: eapol: T3642: only add "pki" key to interface dict if pki is configuredChristian Poessinger
2021-09-06pki: eapol: T3642: use write_file() to store certificatesChristian Poessinger
2021-09-06ifconfig: T3806: "ipv6 address no_default_link_local" required for MTU < 1280Christian Poessinger
This commit also extends the smoketest to verify that the exception for this error is raised.
2021-09-06pki: T3642: verify() that we can not delete certificates still referenced in CLIChristian Poessinger
2021-09-05name-server: T3804: merge "system name-servers-dhcp" into "system name-server"Christian Poessinger
We have "set system name-server <ipv4|ipv6>" to specify a name-server IP address we wan't to use. We also have "set system name-servers-dhcp <interface>" which does the same, but the name-server in question is retrieved via DHCP. Both CLI nodes are combined under "set system name-server <ipv4|ipv6|interface>" to keep things as they are in real life - we need a name-server. (cherry picked from commit 2ecf7a9f9cbe9359457bd23b4a0c45f3763123c7)
2021-09-04bgp: T3798: "replace-as" option can only be used when "no-prepend" is definedChristian Poessinger
Commit 5f1c1ae4 ("bgp: T3798: add support for neighbor local-as <n> replace-as") added support for a new CLI option when the local-as is changed for a specified neighbor or peer-group. There was an error in the CLI / design as the "replace-as" option can only be used when "no-prepend" is defined. Thus "no-prepend" became a <node> and the new "replace-as" leafNode is now a child of "no-prepend".
2021-09-03login: T971 allow quoting in public-keys optionsPaul Lettington
This patch allows the use of `&quot;` in ssh public-key options which unlocks the ability to set the `from` option in a way that sshd will accept to limit what hosts a user can connect from.
2021-09-03bgp: T3798: add support for neighbor local-as <n> replace-asChristian Poessinger
2021-09-02tunnel: T3788: Add check keys for ipip and sitViacheslav
Keys are not allowed with ipip and sit tunnels
2021-09-02login: T3792: bugfix for usernames containing a hyphenChristian Poessinger
While migrating to get_config_dict() in commit e8a1c291b1 ("login: radius: T3192: migrate to get_config_dict()") the user-name was not excluded from mangling (no_tag_node_value_mangle=True). This resulted in a username "vyos-user" from CLI to be actually created as "vyos_user" on the system. This commit also adds respective Smoketests to prevent this in the future.
2021-09-02login: radius: T3192: drop workaround required by get_config_dict()Christian Poessinger
The workaround is no longer required, as the issue was resolved in get_config_dict() so if it is a <multi/> node, a list is always returned.
2021-09-01Merge pull request #986 from sever-sever/T2920Christian Poessinger
tunnel: T2920: Add checks tun with same source addr and keys
2021-09-01tunnel: T2920: Add checks tun with same source addr and keysViacheslav
2 tunnels with the same local-address should has different keys Check existing tunnels (source-address key) with new tunnel.
2021-08-31vyos.ethtool: T3163: purify code to read and change flow-control settingsChristian Poessinger
It makes no sense to have a parser for the ethtool values in ethtool.py and ethernet.py - one instance ios more then enough!
2021-08-31ethernet: T3163: only change ring-buffer settings if requiredChristian Poessinger
Only update the RX/TX ring-buffer settings if they are different from the ones currently programmed to the hardware. There is no need to write the same value to the hardware again - this could cause traffic disruption on some NICs.
2021-08-31ethernet: T2241: check if interface supports changing speed/duplex settingsChristian Poessinger
Not all interface drivers have the ability to change the speed and duplex settings. Known drivers with this limitation are vmxnet3, virtio_net and xen_netfront. If this driver is detected, an error will be presented to the user.
2021-08-31ethernet: T3514: bail out early on invalid adapter speed/duplex settingChristian Poessinger
Ethernet adapters have a discrete set of available speed and duplex settings. Instead of passing every value down to ethtool and let it decide, we can do this early in the VyOS verify() function for ethernet interfaces.
2021-08-30tunnel: T3786: Add checks for source any and not keyViacheslav
2021-08-29wireguard: T3763: The port availability check fixzsdc
Check a port availability only if it was changed in current commit. This should protect from fail-positive errors when other parameters change for an interface.
2021-08-29wireguard: T3763: Fixed uninitialized port issuezsdc
The commit fixes the problem, when port availability check is triggered even if a port for WireGuard interface is not defined (randomized port, default behavior).
2021-08-29ospf: T3236: remove debug print() statementChristian Poessinger
2021-08-29ospf: T3236: add possibility to redistribute "table"Christian Poessinger
Add new CLI command: * "set protocols ospf redistribute table <n>"
2021-08-29isis: T3783: bugfix configuring spf-delay-ietfChristian Poessinger
Mandatory FRR options for spf-delay-ietf did not get rendered in the Jinja2 template.
2021-08-28Merge pull request #980 from zdc/T3763-sagittaChristian Poessinger
wireguard: T3763: Added check for listening port availability
2021-08-26vyos.util: T3763: Optimized the check_port_availability functionzsdc
`print` was removed or replaced to `ValueError`, where possible.
2021-08-26ipsec: T1210: support road-warrior IP assignment via RADIUS Framed-IP-AddressChristian Poessinger
Extended CLI command: "set vpn ipsec remote-access connection rw pool" with a "radius" option.
2021-08-26wireguard: T3763: Added check for listening port availabilityzsdc
Each wireguard interface requires a unique port for in and out connections. This commit adds the new `vyos.util` function - `check_port_availability`, and uses it to be sure that a port that is planned to be used for wireguard interface is truly available and not used by any other services (not only other wireguard interfaces).
2021-08-24container: T3769: remove container when marked as "disable"Christian Poessinger
2021-08-24container: T3769: disable bridge "hairpinMode" modeChristian Poessinger
After commit 209ce3d9 ("container: T3769: when container networks are used, always bridge the networks") IP masquerading (NAT) was disabled. No need to keep the haipin flag.
2021-08-23container: T3769: when container networks are used, always bridge the networksChristian Poessinger
As VyOS is a network operation system with bridging and NATing available from the VyOS CLI, it makes no sense to let podman do it's own sort of "NAT". If one really want's to NAT into a container, use the VyOS CLI to do so. If you wan't to bridge your networks, use the VyOS CLI to do so.
2021-08-23container: T2216: add option to "disable" a containerChristian Poessinger
2021-08-23container: T2216: verify() volume pathsChristian Poessinger
Volumes must have both a source and destination path specified. Also the source path must exist on the current system.
2021-08-23container: T2216: bugfix ValueError when assembling volumesChristian Poessinger
A call to .items() was missing that triggered the following error: ValueError: too many values to unpack (expected 2)
2021-08-23container: T2216: no need to query container statusChristian Poessinger
As VyOS CLI is the only truth for dealing with containers we do not need to query if a container is running, exists or what so ever. We simply always restart it if something changes and do not rely on the underlaying Linux status. If a users does container stuff under the hood - it will be overridden.
2021-08-23containers: T2216: restructure container_base_cmd to have image name at the endChristian Poessinger
2021-08-23containers: T2216: add CLI commands to specify restart behavior and memory usageChristian Poessinger
A container is limited to 256MB memory by default and will always restart on failure.
2021-08-23containers: T2216: xml: impove help string for address commandChristian Poessinger
2021-08-23containers: T2216: add missing verify() step on environment variablesChristian Poessinger
A environment variable MUST always have a value specified. Non existing values will cause the following error: Traceback (most recent call last): File "/usr/libexec/vyos/conf_mode/containers.py", line 269, in <module> apply(c) File "/usr/libexec/vyos/conf_mode/containers.py", line 224, in apply env_opt += " -e ".join(f"{k}={v['value']}" for k, v in container_config['environment'].items()) File "/usr/libexec/vyos/conf_mode/containers.py", line 224, in <genexpr> env_opt += " -e ".join(f"{k}={v['value']}" for k, v in container_config['environment'].items()) KeyError: 'value'
2021-08-21pppoe: T3090: migrate to vyos.ifconfig library to use the full potentialChristian Poessinger
Now that MSS clamping is done on the "per-interface" level the entire PPPoE stuff would have needed to get a full copy in GNU BASH for this or, participate in the common library. Add a new PPP ip-up script named 99-vyos-pppoe-callback which will call the vyos.ifconfig.PPPoEIf.update() function to configure everything as done with all other interfaces. This removes duplicated code for VRF assignment and route installation when a PPPoE interface is brought up or down.
2021-08-21wwan: T3620: remove superfluous import statementChristian Poessinger
WWAN does no londer need to render any configuration files.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 02:47:05 +0000