| Age | Commit message (Collapse) | Author |
|---|
|
policy-route: T4697: Add missing rule_id for verify_rule func
|
|
|
|
This will set the listen-host ocserv configuration option.
|
|
There is a missing 'rule_id' in verify_rule() function
We call it from the loop but don't provide argument 'rule_id'
It cause "NameError: name 'rule_id' is not defined"
Fix it
|
|
T3896(adjacent): Fix ocserv local user requirement, add groupconfig
|
|
openvpn: T4679: Fix incorrect verify local and remote address
|
|
In the OpenVPN site-to-site config we can use IPv6 peers
without IPv4 configurations but "verify()" checks also local and
remote IPv4 addresses that in this case will be empty lists
For example:
set interfaces openvpn vtun2 local-address 2001:db8::1
set interfaces openvpn vtun2 remote-address 2001:db8::2
Check in the commit (v4loAddr == v4remAddr) <= both empty lists
commit
DEBUG: [] == [] or ['2001:db8::2'] == []
So we should also check v4loAddr, v4remAddr, v6loAddr, v6remAddr
are not empty
|
|
|
|
|
|
|
|
|
|
firewall node
* Refactor firewall and zone-policy rule creation and cleanup
* Migrate interface firewall values to `firewall interfaces <name> <direction> name/ipv6-name <name>`
* Remove `firewall-interface.py` conf script
|
|
bonding: T4668: Fix bond members not adding/interface state incorrect
|
|
Fixes several bugs around bonding member interface states not matching
the committed configuration, including:
- Disabled removed interfaces coming back up
- Newly added disabled interfaces not staying down
- Newly added interfaces not showing up in the bond
|
|
Refactor interfaces-bonding.py to simplify existing code and to remove
potentially bugprone sections in preparation for member add/remove
fixes for T4668.
|
|
nat: T538: Add static NAT one-to-one
|
|
T4665: Keepalived: Allow same VRID on interface
|
|
Fix the issue when configured pseudo-ethernet interface cannot
change self mode
|
|
Using the same VRID on an interface is allowed as long as
the address family is different (VRRPv2 vs VRRPv3)
|
|
|
|
This extends the implementation of commit 0cc7e0a49094 ("firewall: T4655: Fix
default action 'drop' for the firewall") in a way that we can now also use the
XML <defaultValue> node under "firewall name" and "firewall ipv6-name". This
is a much cleaner approach which also adds the default value automatically to
the CLIs completion helper ("?").
|
|
nat: T4367: Move nat rules from /tmp to /run/nftables_nat.conf
|
|
console: T4646: Fixed USB console issues
|
|
* fixed the `systemctl restart` command that used a value from config instead
converted to `ttyUSBX`
* moved systemd units from `/etc/` to `/run/`
|
|
Move nftables nat configuration from /tmp to /run
As we have for other services like firewall, conntrack
Don't remove the config file '/run/nftables_nat.conf' after commit
|
|
Section.interface()
Commit cfde4b49 ("ifconfig: T2223: add vlan switch for Section.interfaces()")
added the functionality of the local get_interfaces() function to the base
class so all other parts in the system can query for interface names of a given
type including or excluding their vlan sub-interfaces.
|
|
|
|
|
|
|
|
By default SSTP bind port '443' and this port can be used by
another service like 'service https' or 'vpn openconnect'
Check if port bound to another service
|
|
A macsec interface requires a dedicated source interface, it can not be
shared with another macsec or a pseudo-ethernet interface.
set interfaces macsec macsec10 address '192.168.2.1/30'
set interfaces macsec macsec10 security cipher 'gcm-aes-256'
set interfaces macsec macsec10 security encrypt
set interfaces macsec macsec10 security mka cak '232e44b7fda6f8e2d88a07bf78a7aff4232e44b7fda6f8e2d88a07bf78a7aff4'
set interfaces macsec macsec10 security mka ckn '09924585a6f3010208cf5222ef24c821405b0e34f4b4f63b1f0ced474b9bb6e6'
set interfaces macsec macsec10 source-interface 'eth1'
commit
set interfaces pseudo-ethernet peth0 source-interface eth1
commit
Reuslts in
FileNotFoundError: [Errno 2] failed to run command: ip link add peth0 link eth1 type macvlan mode private
returned:
exit code: 2
noteworthy:
cmd 'ip link add peth0 link eth1 type macvlan mode private'
returned (out):
returned (err):
RTNETLINK answers: Device or resource busy
[[interfaces pseudo-ethernet peth0]] failed
Commit failed
|
|
|
|
If Nginx address/port is already binded to another service
(for exampmle openconnect default port 443)
https api cannot start and we don't see any error in the output.
Add this check before applying service/commit
|
|
We check listen port before commit service if is port available and
not bounded, but when we start openconnect our own port starts be
bounded by "ocserv-main" process and next commit will be fail as
port is already bound
To fix it, extend check if port already bonded and it is not our
self process "ocserv-main"
|
|
When MACsec was bound to an ethernet interface and the underlaying
source-interface got changed (even description only) this terminated the
MACsec session running on top of it.
The root cause is when EAPoL was implemented in commit d59354e52a8a7f we
re-used the same systemd unit which is responsible for MACsec. That indeed lead
to the fact that wpa_supplicant was always stopped when anything happened on
the underlaying source-interface that was not related to EAPoL.
|
|
From ocserv documentation:
```
If the groupconfig option is set, then config-per-user will be
overriden, and all configuration will be read from radius. That
also includes the Acct-Interim-Interval, and Session-Timeout
values.
```
Implement yes/no configuration and parameter handling during jinja
rendering.
Fix bug wherein openconnect-server configuration requires creation
of local user accounts even when RADIUS authentication is used.
Testing:
Set the groupconfig=yes param and observed change in generated
/run/ocserv/ocserv.conf.
Removed the local users via `delete vpn openconnect
authentication local-users` and observed commit & service operation
|
|
Ability to set static NAT (one-to-one) in one rule
set nat static rule 10 destination address '203.0.113.0/24'
set nat static rule 10 inbound-interface 'eth0'
set nat static rule 10 translation address '192.0.2.0/24'
It will be enough for PREROUTING and POSTROUTING rules
Use a separate table 'vyos_static_nat' as SRC/DST rules and
STATIC rules can have the same rule number
|
|
upnp: T4613: Verify listen key in dictionary
|
|
There is no check if 'listen' is exist in the dictionary, fix it
Fix odd ValueHelp format
|
|
|
|
nat66: T4598: Add exclude options in nat66
|
|
|
|
Check if openconnect listen port is available and not used by
another service
|
|
|
|
* https://github.com/Cheeze-It/vyos-1x:
bgp: T4257: Changing BGP "local-as" to "system-as"
|
|
|
|
After commit 85d6c8f7c62 ("vyos.configdict: T4391: enable get_interface_dict()
to be used with ConfigTreeQuery()") we also need to use the full path when
working with Config() as previous calls to get_interface_dict() no longer change
the level of Config().
|
|
|
|
Allows preferred lifetime for prefix advertisements to equal the
configured valid lifetime as per RFC 4861.
|
|
bgp: T4257: Changing BGP "local-as" to "system-as"
This change is to change the global BGP name for the node "local-as" to "system-as"
This is needed so that there's less ambiguity with the local-as feature per neighbor.
bgp: T4257: Changing BGP "local-as" to "system-as"
bgp: T4257: Changing BGP "local-as" to "system-as"
This change is to change the global BGP name for the node "local-as" to "system-as"
This is needed so that there's less ambiguity with the local-as feature per neighbor.
|
