summaryrefslogtreecommitdiff
path: root/src/conf_mode
AgeCommit message (Collapse)Author
2021-01-29ospf: T3267: move "interface ip ospf" configuration to "protocols ospf ↵Christian Poessinger
interface" For easier maintenance and operability move the interface specific protocol setting of OSPF to the OSPF protocol section. This is now also in-line with IS-IS. This means to migrate: ethernet eth0 { vif 202 { ip { ospf { authentication { md5 { key-id 10 { md5-key vyosvyos } } } dead-interval 40 hello-interval 10 priority 1 retransmit-interval 5 transmit-delay 1 } } } } to protocols { ospf { interface eth0.201 { authentication { md5 { key-id 10 { md5-key vyosvyos } } } dead-interval 40 hello-interval 10 priority 1 retransmit-interval 5 transmit-delay 1 } }
2021-01-29rpki: T3266: support deleting entire section from FRR configChristian Poessinger
2021-01-29rpki: T3255: disable debug knobsChristian Poessinger
2021-01-29rpki: T3255: provide full protocol support in XML and PythonChristian Poessinger
This commit provides the implementation of the OSPF CLI with a Jinja2 template that is loaded by FRR reload.
2021-01-27pppoe: T3261: Stop systemd service if pppoe interface disableDmitriyEshenko
2021-01-24ospf(v3): T3236: T3244: adjust to route-map converted name (_ for -)Christian Poessinger
A hyphen in a route-map name will be converted to _, take care about this effect during validation.
2021-01-24ospf(v3): T3236: T3244: add verify() for used route-map existenceChristian Poessinger
2021-01-24ospfv3: T3244: provide full protocol support in XML and PythonChristian Poessinger
This commit provides the implementation of the OSPFv3 (IPv6) CLI with a Jinja2 template that is loaded by FRR reload. It also contains some initial smoketests. There is yet no verify() implementation!
2021-01-24nptv6: T2518: Remove obsolete referencesjack9603301
2021-01-24nptv6: T2518: Delete redundant blank linesjack9603301
2021-01-23nptv6: T2518: Delete the ndppd configuration file when the ndppd service ↵jack9603301
does not need to be enabled
2021-01-23nptv6: T2518: Optimized implementationjack9603301
2021-01-23nptv6: T2518: outbound_interface cannot be any, inbound_interface can be anyjack9603301
2021-01-23nptv6: T2518: Improved template generationjack9603301
2021-01-23nptv6: T2518: Initial support for nat66 (NPT)jack9603301
2021-01-23ospf: T3236: provide full protocol support in XML and PythonChristian Poessinger
This commit provides the implementation of the OSPF CLI with a Jinja2 template that is loaded by FRR reload. It also contains some initial smoketests. There is yet no verify() implementation!
2021-01-22ospf: T3236: support processing by vyos-configdChristian Poessinger
2021-01-22ospf: T3236: add default valuesChristian Poessinger
2021-01-22bgp: T1875: support processing by vyos-configdChristian Poessinger
2021-01-21xml: T3239: override default mtu values and remove workaroundsJohn Estabrook
2021-01-21bgp: T1875: validate() that peer-group specified via listen range existsChristian Poessinger
2021-01-21Merge pull request #690 from Cheeze-It/currentChristian Poessinger
bgp: T1875: Adding BGP listen range FRR feature
2021-01-20bgp: T1875: Adding BGP listen range FRR featureCheeze_It
In this commit we are adding the FRR BGP listen range feature. Specifically it is useful for being able to specify a range in which BGP peers can connect to the local router.
2021-01-20ospf: add skeleton for new XML/Python based implementationChristian Poessinger
2021-01-19nat: T2947: add many-many translationChristian Poessinger
Support a 1:1 or 1:n prefix translation. The following configuration will NAT source addresses from the 10.2.0.0/16 range to an address from 192.0.2.0/29. For this feature to work a Linux Kernel 5.8 or higher is required! vyos@vyos# show nat source { rule 100 { outbound-interface eth1 source { address 10.2.0.0/16 } translation { address 192.0.2.0/29 } } } This results in the nftables configuration: chain POSTROUTING { type nat hook postrouting priority srcnat; policy accept; oifname "eth1" counter packets 0 bytes 0 snat ip prefix to ip saddr map { 10.2.0.0/16 : 192.0.2.0/29 } comment "SRC-NAT-100" }
2021-01-18bgp: T2174: fix validator for neighbor interface configChristian Poessinger
2021-01-18options: T3231: bugfix ctrl-alt-delete option was not workingChristian Poessinger
Bug introduced in commit 193323ba5d (system: T3078: rename "system options" -> "system option") as the new key used in the dict was not migrated.
2021-01-18options: T1919: beautify with open() for reboot on panicChristian Poessinger
2021-01-18bgp: T2174: print debug output before passing config down to FRRChristian Poessinger
2021-01-17bgp: T2174: add debug optionChristian Poessinger
2021-01-17openvpn: T2994: proper cleanup all files on interface deletionChristian Poessinger
2021-01-17ssh: T671: generate rsa, dsa and ed25519 keys on demandChristian Poessinger
2021-01-17ntp: T2185: store configuration in volatile /run areaChristian Poessinger
2021-01-16vrf: T31: add support for - and _ in VRF namesChristian Poessinger
2021-01-16vyos.configdict: node_changed() now accepts key mangling parameterChristian Poessinger
2021-01-16vrf: T31: migrate to get_config_dict()Christian Poessinger
2021-01-16Merge pull request #677 from jack9603301/T3137Christian Poessinger
bridge: T3137: Let VLAN aware bridge approach the behavior of professional equipment
2021-01-16bridge: T3137: Improved verification logicjack9603301
2021-01-15tunnel: T3173: path MTU discovery option should be valuelessChristian Poessinger
2021-01-15Merge branch 'T3173' of https://github.com/sever-sever/vyos-1x into pmtuChristian Poessinger
* 'T3173' of https://github.com/sever-sever/vyos-1x: tunnel: T3173: Add nopmtudisc parameter for tunnels conf-mode
2021-01-15bridge: T3137: Better implementation of VLAN aware Bridgejack9603301
2021-01-15bridge: T3137: Let VLAN aware bridge approach the behavior of professional ↵jack9603301
equipment According to the consensus, the specific behavior of a VLAN aware bridge should conform to the behavior of professional equipment. This commit makes a significant change to the behavior of VLAN aware bridge, and has the following behaviors: 1. Disable `vif 1` configuration 2. When the VLAN aware bridge is enabled, the parent interface is always VLAN 1 3. When `native-vlan` is not configured, the default behavior of the device is `native-vlan 1` 4. The VLAN ids forwarded by the bridge are determined by `vif` 5. It has an `enable-vlan` node to enable VLAN awareness 6. VLAN configuration is allowed only when VLAN aware bridge is activated
2021-01-14bgp: T2174: remove invalid "no bgp default ipv4-unicast" from default configChristian Poessinger
2021-01-14bgp: T2174: enable new implementationChristian Poessinger
2021-01-13ssh: T3212: do not make /run/sshd directory disappear on failureChristian Poessinger
2021-01-13bgp: T2174: bugfix FRR template generationChristian Poessinger
2021-01-12bgp: T2174: bail out early if config node does not existChristian Poessinger
2021-01-11nat: T3206: unable to delete only rules but keep destination nodeChristian Poessinger
2021-01-11login: T3208: fix wrong string formatting on my_setvyos/1.4dev0Christian Poessinger
Commit e8a1c291 ("login: radius: T3192: migrate to get_config_dict()") did an invalid forward of the newly encrypted passwort to my_set to store it inside the config.
2021-01-10tunnel: T3173: Add nopmtudisc parameter for tunnels conf-modesever-sever
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 20:03:12 +0000