| Age | Commit message (Collapse) | Author |
|---|
|
|
|
dhcp-interface
|
|
|
|
dhclient fails to execute the script without the extension.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Commit dce67433 ("util: T2226: rewrite resume-vm to use run") changed the way
in which the script executed system binaries in a way which could not be
processes by the underlayin infrastructure (lists are not supported, only
strings).
|
|
|
|
|
|
Some software starts dhclient without IP protocol flag (`-4`, `-6`),
this commit adds the ability to find such processes as well as with a
protocol flag.
Additionally, to handle rare situations when PID file may not exists
(most likely, when multiple dhclient processes started with the same
PID file path), added last-resort action to kill such dhclients.
|
|
There were two problems with VRF support inside dhclient-script:
- VRF check inside the `01-vyos-cleanup` hook was needless because it will be done inside the `03-vyos-ipwrapper` anyway;
- VRF was ignored for in-kernel routes in `03-vyos-ipwrapper`. Theoretically, there must be no situation now when this can leads to a real problem, but better will be to keep both kernel and FRR backends in sync.
Also, the way to get and use a VRF name was changed to an easier one.
|
|
Since in some cases a dhclient command may not end with an interface name, the way to find out a list of dhclients running for a current interface was replaced to catch PIDs regardless of the exact command syntax.
|
|
Turns out we still need it, else a MC7710 card won't work on an APU4 device.
This reverts commit f9e0fb6bffd41c143ff5454c3b73cca4a588ca86.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is no longer required after commit for the VyOS Kernel configuration
https://github.com/vyos/vyos-build/commit/3fa7fe6926a538a8b4f25
|
|
Commit b082a6fb21 ("lcd: T2564: flatten CLI interface") by accident replaced
the template for hostapd which an LCD configuration during implementation of
T2564.
This has been corrected by restoring the content of the service configuration
from commit 8efb8ba1e (one commit earlier).
|
|
|
|
|
|
|
|
* 't2564-lcd' of github.com:c-po/vyos-1x:
lcd: T2564: flatten CLI interface
system display: T2564: Added test model
system display: T2564: Dictionary code update
system display: T2564: Conf files to /run
system display: T2564: Changed "duration" to "time"
system display: T2564: py code cleanup
system display: T2564: Replace "config (enabled|disabled)" with "display disabled"
system display: T2564: Lowercase model names
system display: T2564 Extend VyOS to support appliance LCDs
|
|
* set system lcd device <device>
* set system lcd model <modeml>
Both device and model have completion helpers for supported interfaces and LCD
displays.
|
|
|
|
|
|
T2486: DNS, vyos-hostsd fixes
|
|
|
|
|
|
|
|
For more examples on the new get_config_dict() approach migrate this
implementation as it is not yet in production use. Also this serves as proof of
concept code for further migrations.
|
|
|
|
|
|
- vyos-hostsd-client syntax changed
- track changes in changes variable
- call apply only once at the end if any changes were made
- remove 'cli-shell-api existsEffective system disable-dhcp-nameservers'
condition check as the functionality was moved into vyos-hostsd
- remove comparison between old_ and new_ variables as it caused a bug
as the nameservers didn't get updated on renew or system restart,
the dhclient lease file persists across reboots, so on boot the old
variables will contain the values from previous dhclient run so they
will usually be equal to the new variables.
|
|
|
|
During testing it was discovered that on 5 out of 10 reboots the USB
enumeration/mapping from physical port to /dev/ttyUSB is different. The root
cause is that it's a FIFO so first found/loaded driver module will be assigned
ttyUSB0.
This mixed up the serial interfaces of my FTDI chips and my connected Sierra
Wireless MC7710 card which was no longer functioning as it now was mapped to
a different USB interface.
The solution is a udev rule which persistently maps the USB-tree-device to a
device file in /dev. Wait? isn't this what /dev/serial/by-{id,path} is for?
Correct, it does the very same thing but the problem is as follows:
* by-path uses device file names which also incorporate the parent bus system,
this results in "pci-0000:00:10.0-usb-0:2.4:1.0-port0"
* by-id will overwrite the assigned device symlink if a new USB device with the
same name appears. This happens to some FTDI devices with no serial number
programmed so the device added last wins and will be the only one in
the by-id folder - cruel world!
This commit adds a new directory /dev/serial/by-bus which holds the following
device files (as example):
$ ls -1 /dev/serial/by-bus/
usb0b1.3p1.0
usb0b1.3p1.2
usb0b1.3p1.3
usb0b2.4p1.0
usb0b2.4p1.1
usb0b2.4p1.2
usb0b2.4p1.3
|
|
|
|
|
|
Several improvements in processing RFC3442 routes (support for route deletion, DHCP RENEW and link-local routes)
|
|
|
|
After migrating PowerDNS to systemd and also its configuration files to a
volatile directory in commit 77d725f ("dns-forwarding: T2185: move configuration
files to volatile /run directory") the path for the control file has not
been altered and pushed to the client rec_control binary"
|
|
|
|
|
