summaryrefslogtreecommitdiff
path: root/src/migration-scripts/interfaces
AgeCommit message (Collapse)Author
2020-12-20ethernet: T3140: relax "ethernet offload-options" CLI definitionChristian Poessinger
Migrate from ethernet eth1 { offload-options { generic-receive on generic-segmentation on scatter-gather on tcp-segmentation on udp-fragmentation on } } to ethernet eth1 { offload { ufo tso sg gso gro } }
2020-12-20wifi: T3043: country-code should be lower caseChristian Poessinger
2020-12-08mirror: T3089: support two-way traffic mirroringjack9603301
2020-12-06migration: interfaces: remove superfluous importsChristian Poessinger
2020-12-04pppoe: T3112: drop "ipv6 enable" optionChristian Poessinger
IPv6 enable can be considered once the ipv6 node is present!
2020-11-21ethernet: T3048: fix migrator to also support a plain configChristian Poessinger
When VyOS boots the first time with the default configuration there it actually no "interface ethernet" node present in the config, thus we must exit the migrator. Without this change vyos.configtree.ConfigTreeError: Path [b'interfaces ethernet'] doesn't exist will be thrown.
2020-11-21ethernet: T3048: drop static smp-affinity for dynamic performance tuningChristian Poessinger
After migrating the ethernet interfaces from the good old Perl days the smp-affinity node yet has no effect anymore as the code is still missing (my bad, sorry). Drop the smp-affinity node and rather use tuned instead with the network-throughput or network-latency profile. - network-throughput: Profile for throughput network tuning. It is based on the throughput-performance profile. It additionaly increases kernel network buffers. - network-latency: Profile for low latency network tuning. It is based on the latency-performance profile. It additionaly disables transparent hugepages, NUMA balancing and tunes several other network related sysctl parameters. I'd set network-throughput as the default on a new set system option performance <throughput | latency> CLI node which is present in the default configuration. https://access.redhat.com/sites/default/files/attachments/201501-perf-brief-low-latency-tuning-rhel7-v2.1.pdf
2020-11-03wireless: T3042: move wifi-regulatory-domain into individual interface ↵Christian Poessinger
definition
2020-11-03wireless: T3043: rename "wpa mode both" to "wpa+wpa2"Christian Poessinger
2020-09-20wwan: ifconfig: T2905: sync CLI nodes in dialup interfacesChristian Poessinger
Both PPPoE and WWAN interfaces are dialer interfaces handled by ppp, but use different CLI nodes for the same functionality. PPPoE has "connect-on-demand" to initiate an "on-demand" dialing and WWAN uses "ondemand" for this purpose. Rename WWAN "ondemand" node to "connect-on-demand".
2020-09-20vif-s: ifconfig: T2903: use explicit VLAN protocol over raw numbersChristian Poessinger
In the past we had to provide the ethertype value used for the VLAN protocol (0x88A8 -> 802.1ad or 0x8100 -> 802.1q). This should be changed to a more user friendly CLI node (protocol over ethertype) and 802.1ad over it's raw value 0x88A8. There is no need in presenting RAW information from the ethernet header to the user. Also iproute2 calls it protocol which makes way more sense over the "raw" value.
2020-08-22dhcpv6-pd: T2677: optimize CLI interface for PD configurationChristian Poessinger
The current CLI did not support multiple prefix-delegations per interface. Some ISPs only send one /64 to a client per prefix-delegation request, but they allow the customer to request multiple prefixes. The 'dhcpv6-options prefix-delegation' node has been renamed and converted to a tag node named 'dhcpv6-options pd'. The tag node specifies a PD request (>=0). In the past the user needed to know what prefix will be assigned and required to calculate the sla-len by himself. The 'sla-len' node was dropped and is now calculated in the background from the 'dhcpv6-options pd 0 length' node. It is no longer mandatory to supply the 'sla-id' node, if sla-id is not specified it is 'guessed' by counting upwards. Example configuration: ---------------------- ethernet eth1 { address dhcpv6 dhcpv6-options { pd 0 { length 56 interface eth2 { address 1 } } } } This will request a /56 assignment from the ISP and will delegate a /64 network to interface eth2. VyOS will use the interface address ::1 on the delegate interface (eth2) as its local address.
2020-07-29wireguard: T2743: move key migration from config script to migration scriptChristian Poessinger
Migration files on the storage should be done one time by a migration script instead of every time the configuration changes. Moving this to an older migration script is fine as this is around for a long time and all rolling releases are already up2date. It only affects updates from VyOS 1.2 series.
2020-06-26migration: interfaces: T2622: fix pseudo-ethernet migrationChristian Poessinger
By implementation misstake we exited the migrationscript if no VXLAN interface was found but this was wrong as the same loop is used on pseudo-ethernet interfaces. The Migrator previously only worked on pseudo-ethernet when also a VXLAN interface was present. This has been corrected.
2020-06-19router-advert: T2618: fix for wrongly converted "autonomous-flag"Christian Poessinger
Boolean nodes have been removed b/c a boolean value makes less sense. The same behavior can be achieved with the presence or absence of a node. Unfortunately the 'autonomous-flag' node has been a negated one which did not migrate it to 'no-autonomous-flag' if it was set to false previously.
2020-06-07wwan: T2529: migrate device from ttyUSB to usbXbY.YpZ.ZChristian Poessinger
During testing it was discovered that there is a well known problem (we had for ethernet interfaces) also in the serial port world. They will be enumerated and mapped to /dev/ttyUSBxxx differently from boot to boot. This is especially painful on my development APU4 board which also has a Sierra Wireless MC7710 LTE module installed. The serial port will toggle between ttyUSB2 and ttyUSB5 depending on the amount of serial port extenders attached (FT4232H). The shipped udev rule (/usr/lib/udev/rules.d/60-serial.rules) partly solves this by enumerating the devices into /dev/serial/by-id folder with their name and serial number - it's a very good idea but I've found that not all of the FT4232H dongles have a serial number programmed - this leads to the situation that when you plug in two cables with both having serial number 0 - only one device symlink will appear - the previous one is always overwritten by the latter one. Derive /usr/lib/udev/rules.d/60-serial.rules and create a /dev/serial/by-bus directory and group devices by attached USB root port. vyos@vyos:~$ find /dev/serial/by-bus/ -name usb* -exec basename {} \; | sort usb0b1.3p1.0 usb0b1.3p1.2 usb0b1.3p1.3 usb0b2.4p1.0 usb0b2.4p1.1 usb0b2.4p1.2 usb0b2.4p1.3 So we have USB root 0 with bus 1.3 and port 1.0. The enumeration is constant accross reboots.
2020-05-27dhcpv6-pd: pppoe: T2506: remove debug print statementChristian Poessinger
2020-05-26dhcpv6-pd: pppoe: T2506: restructure CLIChristian Poessinger
Rename the CLI nodes for prefix delegation from "dhcpv6-options delegate <interface>" to "dhcpv6-options prefix-delegation interface <interface>". The change is required to add the possibility to request for specific prefix sized via the CLI. That option was not possible with the old configuration tree.
2020-04-09vxlan: pseudo-ethernet: T2260: convert link nodes to source-interfaceChristian Poessinger
2020-04-09wireguard: T2206: fix comment in migration scriptChristian Poessinger
2020-04-05wireguard: T2206: split endpoint node into address and portChristian Poessinger
WireGuard has been the only subsystem combining a remote ip address and a remote port number into a single node. This is bad as there is no possiblity for the XML based input validation for IP address and port numbers. That's the reason the peer endpoint node goets migrated into a peer address and a peer port node utilizing the embedded syntax node checking for IP addresses and port ranges.
2020-04-05wwan: migrate: fix commentChristian Poessinger
2020-03-28wwan: T1988: support interface disableChristian Poessinger
2020-03-26router-advert: T2162: bugfix migrating link-mtu nodes with 0 valueChristian Poessinger
... those nodes mean link-mtu advertisement is disabled in radvd and thus we delete the node completely as it's useless.
2020-03-24router-advert: T1831: add config migration scriptChristian Poessinger
2020-02-23pppoe: T1318: declutter name-server CLI nodesChristian Poessinger
Instead of letting the user choose between auto and none where auto is default, it makes more sesne to just offer an option to disable the default behavior.
2020-02-23pppoe: T2055: remove router-advert node in client interfaceChristian Poessinger
2020-02-23pppoe: T1318: migrate user-id and password nodes under an authentication nodeChristian Poessinger
2020-02-23pppoe: T1318: rename link to source-interfaceChristian Poessinger
2020-02-23pppoe: T1318: extend migrator for firewall, qos and ip routing nodesChristian Poessinger
2020-02-23pppoe: T1318: proper delete old interfaces in migratorChristian Poessinger
2020-02-23pppoe: T1318: fix migrator and add missing link statementChristian Poessinger
2020-02-23pppoe: T1318: add first version of new XML/Python implementationChristian Poessinger
vyos@vyos# show interfaces pppoe pppoe pppoe0 { default-route force link eth2.7 mtu 400 name-server auto password 12345678 user-id vyos@vyos.io }
2019-11-24bridge: T1673: re-use "base" variableChristian Poessinger
2019-11-24bridge: T1673: add missing VLAN bridge member migrationChristian Poessinger
VLAN interfaces assigned to a bridge as member have not been migrated so far. This was the case for vif, vif-s and vif-c interfaces. The migration code has been generalized in migrate_bridge() so it is re-usable for regular interfaces, vif, vif-s and vif-c interfaces - all now use the same code.
2019-11-23wireless: T1627: change RADIUS CLI syntaxChristian Poessinger
Adopt RADIUS configuration and harmonize it with the rest of VyOS. Move the following configuration block: security { wpa { cipher CCMP mode wpa2 radius-server 172.16.100.10 { port 1812 secret secretkey } radius-server 172.16.100.11 { port 1812 secret secretkey } } } to the harmonized version of: security { wpa { cipher CCMP mode wpa2 radius { server 172.16.100.10 { port 1812 secret secretkey } server 172.16.100.11 { port 1812 secret secretkey } } } } And add the new "set interfaces wireless wlan0 security wpa radius source-address" CLI command to specify the origin of any RADIUS query on systems having multiple IP addresses.
2019-11-23wireless: T1627: config migrator does not support camel casingChristian Poessinger
convert all nodes to lowercase
2019-11-23wireless: T1627: initial rewrite in XML/Python styleChristian Poessinger
Working: - Wireless modes b, g, n, ac - WPA/WPA2 psk and RADIUS (tested using Microsoft NPS)
2019-11-11[OpenVPN]: T1704: Added function for ncp-ciphers, and ability to disable it.vindenesen
[OpenVPN]: T1704: Changed config structure for OpenVPN encryption to support ncp-ciphers. [OpenVPN]: T1704: Added migration scripts for interface 2-to-3
2019-09-04bonding: T1614: T532: new commit validatorsChristian Poessinger
As in the past during the priority race of the bash script invalid configuration could appear in the CLI and are de-synced from the kernle state, e.g. some bonding modes do not support arp_interval. This is no longer allowed and added to the migration script so that the config again represents the truth.
2019-09-04bonding: T1614: Initial version in new style XML/Python interfaceChristian Poessinger
The node 'interfaces ethernet eth0 bond-group' has been changed and de-nested. Bond members are now configured in the bond interface itself. set interfaces bonding bond0 member interface eth0
2019-08-24T1611: check if config node exists before getting valueJernej Jakob
2019-08-07[bridge] T1156: add missing if statement in config-migrationChristian Poessinger
Fixes: Traceback (most recent call last): File "/opt/vyatta/etc/config-migrate/migrate/interfaces/0-to-1", line 27, in <module> for br in config.list_nodes(base): File "/usr/lib/python3/dist-packages/vyos/configtree.py", line 255, in list_nodes raise ConfigTreeError("Path [{}] doesn't exist".format(path_str)) vyos.configtree.ConfigTreeError: Path [b'interfaces bridge'] doesn't exist
2019-08-04[bridge] T1156: rename igmp-snooping node to igmpChristian Poessinger
2019-08-03[bridge] T1156: support adding and removing bridge member interfacesChristian Poessinger
This is the new syntax bridge br0 { member { interface eth0 { cost 10 } interface eth1 { cost 11 } } }