summaryrefslogtreecommitdiff
path: root/src/migration-scripts
AgeCommit message (Collapse)Author
2022-05-11Firewall: T3907: add log-level options in firewallNicolas Fort
2022-05-05policy: T4414: add support for route-map "as-path prepend last-as x"Christian Poessinger
2022-04-28arp: T4397: change CLI syntax to support interface and VRF bound ARP entriesChristian Poessinger
* set protocols static arp interface eth0 address 192.0.2.1 mac 01:23:45:67:89:01
2022-04-21pppoe: T4384: replace default-route CLI option with common CLI nodes already ↵Christian Poessinger
present for DHCP VyOS 1.4 still leverages PPPd internals on the CLI. pppd supports three options for a default route, none, auto, force. * none: No default route is installed on interface up * auto: Default route is only installed if there is yet no default route * force: overwrite any default route There are several drawbacks in this design for VyOS and the users. If auto is specified, this only counted for static default routes - but what about dynamic ones? Same for force, only a static default route got replaced but dynamic ones did not got taken into account. The CLI is changed and we now re-use already existing nodes from the DHCP interface configuration: * no-default-route: On link up no default route is installed, same as the previous default-route none * default-route-distance: We can now specify the distance of this route for the routing table on the system. This defaults to 210 as we have for DHCP interfaces. All this will be migrated using a CLI migration script.
2022-04-09Merge pull request #1242 from goodNETnick/ocserv_local_otpChristian Poessinger
ocserv: T4231: Added OTP support for Openconnect 2FA
2022-04-09ocserv: T4231: Added OTP support for Openconnect 2FAgoodNETnick
2022-04-07ipv6: T4346: delete (migrate) CLI command to disable IPv6 address familyChristian Poessinger
2022-03-31Merge branch 'vyos:current' into ocserv_local_otpgoodNETnick
2022-03-24ipsec: T4288: drop leading empty line to detect runtime environmentChristian Poessinger
2022-03-24Merge pull request #1251 from srividya0208/T4288aChristian Poessinger
ike-group: T4288 : close-action is missing in swanctl.conf
2022-03-24ike-group: T4288 : close-action is missing in swanctl.confsrividya0208
close-action parameter is missing in the swanctl.conf file
2022-03-23bgp: T4314: add missing check to migration scriptJohn Estabrook
2022-03-16ocserv: T4231: Added OTP support for Openconnect 2FAgoodNETnick
2022-02-28ssh: T4273: bugfix cipher and key-exchange multi nodesChristian Poessinger
After hardning the regex validator to be preceeded with ^ and ending with $ it was no longer possible to have a comma separated list as SSH ciphers. The migrations cript is altered to migrate the previous comma separated list to individual multi node entries - cipher and key-exchange always had been multinodes - so this just re-arranges some values and does not break CLI compatibility
2022-02-04firewall: T4209: Fix support for rule `recent` matchessarthurdev
2022-01-28firewall: T4217: install protocol tcp_udp if port group does not use a protocolChristian Poessinger
2022-01-21firewall: T4186: ICMP/v6 migrationssarthurdev
2022-01-17bgp: T3741: bugfix migrator - exit() was called without savingChristian Poessinger
2022-01-17Merge pull request #1174 from sarthurdev/firewallChristian Poessinger
firewall: T4178: T3873: tcp flags syntax refactor, intra-zone-filtering fix
2022-01-17firewall: policy: T4178: Migrate and refactor tcp flagssarthurdev
* Add support for ECN and CWR flags
2022-01-16Revert "migrator: interfaces: T4171: bugfix ConfigTreeError"Christian Poessinger
This reverts commit 29efbf51efea559773f61703f11a77a8aee6de36.
2022-01-16Revert "migrator: interfaces: T4171: bugfix ConfigTreeError"Christian Poessinger
This reverts commit 391ce22b76190309f81e048ebffab778b0fdee1d.
2022-01-16dns-forwarding: T1595: remove unnecessary nesting in migration script 1 -> 2Christian Poessinger
2022-01-16bgp: T3741: remove unnecessary exit() in migration script 1 -> 2Christian Poessinger
2022-01-11migrator: interfaces: T4171: bugfix ConfigTreeErrorChristian Poessinger
2022-01-11Merge pull request #1158 from sarthurdev/firewallChristian Poessinger
firewall: policy: T4131: T4144: T4159: T4164: Fix reported firewall issues, policy-route refactor
2022-01-11policy: T2199: Refactor policy route script for better error handlingsarthurdev
* Migrates all policy route references from `ipv6-route` to `route6` * Update test config `dialup-router-medium-vpn` to test migration of `ipv6-route` to `route6`
2022-01-11migrator: interfaces: T4171: bugfix ConfigTreeErrorChristian Poessinger
Migrating 1.2.8 -> 1.4-rolling-202201110811 vyos-router[970]: Waiting for NICs to settle down: settled in 0sec.. vyos-router[1085]: Started watchfrr. vyos-router[970]: Mounting VyOS Config...done. vyos-router[970]: Starting VyOS router: migrate vyos-router[1490]: Traceback (most recent call last): vyos-router[1490]: File "/opt/vyatta/etc/config-migrate/migrate/interfaces/5-to-6", line 112, in <module> vyos-router[1490]: for if_type in config.list_nodes(['interfaces']): vyos-router[1490]: File "/usr/lib/python3/dist-packages/vyos/configtree.py", line 236, in list_nodes vyos-router[1490]: raise ConfigTreeError("Path [{}] doesn't exist".format(path_str)) vyos-router[1490]: vyos.configtree.ConfigTreeError: Path [b'interfaces'] doesn't exist vyos-router[1455]: Migration script error: /opt/vyatta/etc/config-migrate/migrate/interfaces/5-to-6: Command '['/opt/vyatta/etc/config-migrate/migrate/interfaces/5-to-6', '/opt/vyatta/etc/config/config.boot']' returned non-zero exit status 1.. vyos-router[970]: configure. vyos-config[979]: Configuration success
2022-01-11policy: T4170: rename "policy ipv6-route" -> "policy route6"Christian Poessinger
In order to have a consistent looking CLI we should rename this CLI node. There is: * access-list and access-list6 (policy) * prefix-list and prefix-list6 (policy) * route and route6 (static routes)
2021-12-31Merge branch 'firewall' of https://github.com/sarthurdev/vyos-1x into currentChristian Poessinger
* 'firewall' of https://github.com/sarthurdev/vyos-1x: zone_policy: T3873: Implement intra-zone-filtering policy: T2199: Migrate policy route op-mode to XML/Python policy: T2199: Migrate policy route to XML/Python zone-policy: T2199: Migrate zone-policy op-mode to XML/Python zone-policy: T2199: Migrate zone-policy to XML/Python firewall: T2199: Migrate firewall op-mode to XML/Python firewall: T2199: Migrate firewall to XML/Python
2021-12-25flow-accounting: T4105: drop "sflow agent-address auto"Christian Poessinger
The implementation of the "auto" option to specify the sflow/netflow agent-address is very error prone. The current implementation will determine the IP address used for the "auto" value as follow: Get BGP router-id 1) If not found use OSPF router-id 2) If not found use OSPFv3 router-id 3) If not found use "the first IP address found on the system Well, what is the "first IP address found"? Also this changes if DHCP is in use. Also another disadvantage is when the BGP/OSPF/OSPFv3 router-id is changed, the agent-address is not updated upon the next reboot of the system. This task is about removing the "auto" keyword from the CLI at all and make it either entirely configurable by the user and hardcode the value in CLI, or not use this at all. If "auto" is specified we will query the system in the above order and set the proper router-id in the CLI. If none can be found the CLI node is removed.
2021-12-25flow-accounting: T4099: rename "netflow source-ip" to source-addressChristian Poessinger
sFlow uses the source-address CLI node and netflow uses source-ip this is just confusing and should be synced to the common source-address CLI node.
2021-12-06firewall: T2199: Migrate firewall to XML/Pythonsarthurdev
2021-11-27ospf: T3753: adjust to CLI options new in FRR 8.0Christian Poessinger
FRR 7.5 router ospf passive-interface default no passive-interface eth0.202 Changed int FRR 8 to interface eth0.202 no ip ospf passive ! router ospf ospf router-id 172.18.254.202 log-adjacency-changes detail passive-interface default
2021-11-27ospfv3: T3753: adjust to CLI options new in FRR 8.0Christian Poessinger
2021-10-21tunnel: T3925: dhcp-interface was of no use - use source-interface insteadChristian Poessinger
(cherry picked from commit c1015d8ce0013719eb898b60b14ffec192b8141c)
2021-10-21tunnel: T3925: shift migration scripts by oneChristian Poessinger
Required for the dhcp-interface migration
2021-10-04bgp: T3741: "parameter default no-ipv4-unicast" is now a default optionChristian Poessinger
2021-09-26T3866: ignore interfaces without "address" in DNS forwarding migrationDaniil Baturin
2021-09-21vrrp: keepalived: T3847: migrate/streamline CLI optionsChristian Poessinger
Rename virtual-address -> address as we always talk about an IP address.
2021-09-21vrrp: keepalived: T3847: remove "transition-script mode-force" optionChristian Poessinger
2021-09-19dhcp-server: T3672: migrate failover name optionChristian Poessinger
Commit 2985035b (dhcp-server: T3672: re-add missing "name" CLI option) unfortunately did not add the name option to the migration script.
2021-09-19dhcp-server: T3672: only one failover peer is supportedChristian Poessinger
2021-09-18dhcp-server: T3838: rename dns-server to name-server nodeChristian Poessinger
IPv4 DHCP uses "dns-server" to specify one or more name-servers for a given pool. In order to use the same CLI syntax this should be renamed to name-server, which is already the case for DHCPv6.
2021-09-18dhcp-server: T1968: allow multiple static-routes to be configuredChristian Poessinger
vyos@vyos# show service dhcp-server shared-network-name LAN { subnet 10.0.0.0/24 { default-router 10.0.0.1 dns-server 194.145.150.1 lease 88 range 0 { start 10.0.0.100 stop 10.0.0.200 } static-route 192.168.10.0/24 { next-hop 10.0.0.2 } static-route 192.168.20.0/24 { router 10.0.0.2 } } }
2021-09-05name-server: T3804: merge "system name-servers-dhcp" into "system name-server"Christian Poessinger
We have "set system name-server <ipv4|ipv6>" to specify a name-server IP address we wan't to use. We also have "set system name-servers-dhcp <interface>" which does the same, but the name-server in question is retrieved via DHCP. Both CLI nodes are combined under "set system name-server <ipv4|ipv6|interface>" to keep things as they are in real life - we need a name-server. (cherry picked from commit 2ecf7a9f9cbe9359457bd23b4a0c45f3763123c7)
2021-09-05system: T3804: rename migration script 20-to-21 -> 21-to-22Christian Poessinger
VyOS 1.3 equuleus now uses version 21 so we have to bump this by one.
2021-08-31vyos.ethtool: T3163: purify code to read and change flow-control settingsChristian Poessinger
It makes no sense to have a parser for the ethtool values in ethtool.py and ethernet.py - one instance ios more then enough!
2021-08-31ethernet: T2241: check if interface supports changing speed/duplex settingsChristian Poessinger
Not all interface drivers have the ability to change the speed and duplex settings. Known drivers with this limitation are vmxnet3, virtio_net and xen_netfront. If this driver is detected, an error will be presented to the user.
2021-08-30ethernet: T3787: remove deprecated UDP fragmentation offloading optionChristian Poessinger
Deprecated in the Linux Kernel by commit 08a00fea6de277df12ccfadc21 ("net: Remove references to NETIF_F_UFO from ethtool."). (cherry picked from commit f5e46ee6cc2b6c1c1869e26beca4ccd5bf52b62f)
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-25 21:16:56 +0000