summaryrefslogtreecommitdiff
path: root/src/migration-scripts
AgeCommit message (Collapse)Author
2020-06-11dns forwarding: T2486: add conf nodes 'addnta', 'recursion-desired', migratorJernej Jakob
Add new nodes for 'service dns forwarding domain': 'addnta': adds addNTA to lua-config-file 'recursion-desired': sets '+' before the zone in forward-zones-file The migrator sets both options for all configured domains. This is usually the desired config.
2020-06-11system: T2486: migrate disable-dhcp-nameservers to name-servers-dhcpJernej Jakob
The previous implementation only supported disabling DHCP nameservers for all interfaces, and was implemented improperly so it didn't work anyway. This migrates it to name-servers-dhcp <interface>, which allows us to enable just the interfaces we want to use for system DNS, identical in syntax to 'service dns forwarding dhcp <interface>'. The migrator searches through all interfaces that have address 'dhcp(v6)?' and adds them to the name-servers-dhcp list if disable-dhcp-nameservers is not set, else it does nothing.
2020-06-09console: T2529: migrate from ttyUSB device to new device in /dev/serial/by-busChristian Poessinger
During testing it was discovered that there is a well known problem (we had for ethernet interfaces) also in the serial port world. They will be enumerated and mapped to /dev/ttyUSBxxx differently from boot to boot. This is especially painful on my development APU4 board which also has a Sierra Wireless MC7710 LTE module installed. The serial port will toggle between ttyUSB2 and ttyUSB5 depending on the amount of serial port extenders attached (FT4232H). The shipped udev rule (/usr/lib/udev/rules.d/60-serial.rules) partly solves this by enumerating the devices into /dev/serial/by-id folder with their name and serial number - it's a very good idea but I've found that not all of the FT4232H dongles have a serial number programmed - this leads to the situation that when you plug in two cables with both having serial number 0 - only one device symlink will appear - the previous one is always overwritten by the latter one. Derive /usr/lib/udev/rules.d/60-serial.rules and create a /dev/serial/by-bus directory and group devices by attached USB root port.
2020-06-09console: T2570: remove support for Hayes ModemsChristian Poessinger
Support for Hayes modems has been long gone (1.2.x) and nobody cared. It was removed in commit d582bbaf3 ("update console settings for systemd") of vyatta-cfg-system. So as there have been zero complaints - cleanup the CLI.
2020-06-09netconsole: T2561: use migrator to delete config nodesChristian Poessinger
The current implementation only works once the system has been fully booted up and the config nodes have been process. So there is no "early" kernel debugging. It is started with priority 400 (after all network stuff) - thus it has a questionable at all for Kernel debugging. It would only make sense if the entire system is changed to supply the config stuff to the Kernel commandline and then send it to a dedicated MAC address target as network will be initialized late. As there are zero Phabricator tasks available and we do not know any user using this - the "feature" will be removed.
2020-06-07wwan: T2529: migrate device from ttyUSB to usbXbY.YpZ.ZChristian Poessinger
During testing it was discovered that there is a well known problem (we had for ethernet interfaces) also in the serial port world. They will be enumerated and mapped to /dev/ttyUSBxxx differently from boot to boot. This is especially painful on my development APU4 board which also has a Sierra Wireless MC7710 LTE module installed. The serial port will toggle between ttyUSB2 and ttyUSB5 depending on the amount of serial port extenders attached (FT4232H). The shipped udev rule (/usr/lib/udev/rules.d/60-serial.rules) partly solves this by enumerating the devices into /dev/serial/by-id folder with their name and serial number - it's a very good idea but I've found that not all of the FT4232H dongles have a serial number programmed - this leads to the situation that when you plug in two cables with both having serial number 0 - only one device symlink will appear - the previous one is always overwritten by the latter one. Derive /usr/lib/udev/rules.d/60-serial.rules and create a /dev/serial/by-bus directory and group devices by attached USB root port. vyos@vyos:~$ find /dev/serial/by-bus/ -name usb* -exec basename {} \; | sort usb0b1.3p1.0 usb0b1.3p1.2 usb0b1.3p1.3 usb0b2.4p1.0 usb0b2.4p1.1 usb0b2.4p1.2 usb0b2.4p1.3 So we have USB root 0 with bus 1.3 and port 1.0. The enumeration is constant accross reboots.
2020-05-27dhcpv6-pd: pppoe: T2506: remove debug print statementChristian Poessinger
2020-05-26dhcpv6-pd: pppoe: T2506: restructure CLIChristian Poessinger
Rename the CLI nodes for prefix delegation from "dhcpv6-options delegate <interface>" to "dhcpv6-options prefix-delegation interface <interface>". The change is required to add the possibility to request for specific prefix sized via the CLI. That option was not possible with the old configuration tree.
2020-05-16nat: T2198: migrate "log enable" node to only "log"Christian Poessinger
2020-04-30dhcpv6-server: T2406: merge sip-server-{address,name} to sip-server nodeChristian Poessinger
The subnet specific nodes sip-server-address & sip-server-name do the same for the user - specify a SIP server. Only the backend is rendered in a different way, as ISC DHCPv6 expects different options. There is absolutely no need for the user to distinguish between both two nodes.
2020-04-26salt: T2384: migrate config optionsChristian Poessinger
- delete log_file, log_level and user nodes - rename hash_type to hash - rename mine_interval to interval
2020-04-22vpn: pptp: T2351: migrate to common radius CLIChristian Poessinger
2020-04-22vpn: pptp: T2351: migrate to common name-server, wins-server nodesChristian Poessinger
2020-04-19ipoe-server: T2324: bugfix name-server migrationChristian Poessinger
... sometimes it seems to have been called dns-server or dns-servers :/ ... lucky me!
2020-04-19{pppoe,ipoe}-server: T2324: T2314: migrate CoA serverChristian Poessinger
2020-04-18{pppoe,ipoe}-server: rename RADIUS keyChristian Poessinger
2020-04-18ipoe-server: T2324: migrate IPv6 client IP pool to common CLI nodesChristian Poessinger
2020-04-18pppoe-server: T2314: fix RADIUS migrationChristian Poessinger
2020-04-18ipoe-server: T2324: migrate RADIUS configuration to common CLI syntaxChristian Poessinger
2020-04-18ipoe-server: T2324: migrate IPv4/IPv6 name-servers to common nodeChristian Poessinger
2020-04-18pppoe-server: T2314: remove debug code from migration scriptChristian Poessinger
2020-04-18pppoe-server: T2314: migrate IPv6 to common CLI nodes with embeeded validationChristian Poessinger
2020-04-18pppoe-server: T2314: migrate RADIUS configuration to common CLI syntaxChristian Poessinger
2020-04-18pppoe-server: T2314: migrate IPv4/IPv6 name-servers to common nodeChristian Poessinger
Instead of having "dns-server server-1|server-2" nodes and the same for IPv6 all DNS nameservers are migrated to a common name-servers node.
2020-04-18dns-forwarding: T2318: bugfix migration scriptChristian Poessinger
Commit bbea850ea5f ("ifconfig: T2057: remove need for interface-types.json") called the Interface() class with a wrong input variable, this caused the following error: Traceback (most recent call last): File "/opt/vyatta/etc/config-migrate/migrate/dns-forwarding/1-to-2", line 64, in <module> raise ValueError(f'Invalid interface name {intf}') ValueError: Invalid interface name eth0 vif 202
2020-04-11vpn: l2tp: T2264: migrate IPv6 prefix node to common CLI styleChristian Poessinger
Combining multiple options into a single CLI node is considered bad practice. IPv6 prefixes consited of the prefix itself and a mask send to the client in one node only. The following CLI parts have been migrated from client-ipv6-pool { delegate-prefix fc00:0:1::/48,64 prefix 2001:db8::/64,64 } to client-ipv6-pool { delegate fc00:0:1::/48 { delegation-prefix 48 } prefix 2001:db8::/48 { mask 64 } } Thus regular validation steps from the VyOS CLI can be used when a prefix is configured.
2020-04-11vpn: l2tp: T2264: remove RADIUS req-limit nodeChristian Poessinger
It makes less sense for the user to specify this behavior.
2020-04-11vpn: l2tp: T2264: combine WINS CLI syntaxChristian Poessinger
There is no reason to distinguish between WINS servers in terms of priority. This is solely a task which can be done in the underlaying Python scripts.
2020-04-11vpn: l2tp: T2264: combine IPv4/IPv6 name-server CLI syntaxChristian Poessinger
There is no reason to distinguish between an IPv4 and IPv6 name-server node on the CLI - this can be done in the underlaying Python scripts.
2020-04-09vxlan: pseudo-ethernet: T2260: convert link nodes to source-interfaceChristian Poessinger
2020-04-09wireguard: T2206: fix comment in migration scriptChristian Poessinger
2020-04-07http api: T2160: move 'api virtual-host' to 'api-restrict virtual-host'John Estabrook
Restriction of api proxy should be owned by https.py, not http-api.py.
2020-04-06util: T2226: rewrite 12-to-13 to use cmdThomas Mangin
2020-04-05wireguard: T2206: split endpoint node into address and portChristian Poessinger
WireGuard has been the only subsystem combining a remote ip address and a remote port number into a single node. This is bad as there is no possiblity for the XML based input validation for IP address and port numbers. That's the reason the peer endpoint node goets migrated into a peer address and a peer port node utilizing the embedded syntax node checking for IP addresses and port ranges.
2020-04-05wwan: migrate: fix commentChristian Poessinger
2020-04-02bgp: T2100: migration to drop parameter disable-network-import-checkJohn Estabrook
2020-03-28wwan: T1988: support interface disableChristian Poessinger
2020-03-26router-advert: T2162: bugfix migrating link-mtu nodes with 0 valueChristian Poessinger
... those nodes mean link-mtu advertisement is disabled in radvd and thus we delete the node completely as it's useless.
2020-03-25service https: T2157: Fix comment blockJohn Estabrook
2020-03-25Merge pull request #265 from thomas-mangin/2057-dhcp-vlanChristian Poessinger
ifconfig: T2057: break down DHCP, add register, STP and VLAN as adapters
2020-03-24service https: T2157: Organize server block directives as 'virtual host'John Estabrook
2020-03-24ifconfig: T2057: remove need for interface-types.jsonThomas Mangin
2020-03-24router-advert: T1831: add config migration scriptChristian Poessinger
2020-03-22sstp: T2150: use full file path on SSL certificatesChristian Poessinger
2020-03-21sstp: T2008: bugfix migrator for radius optionsChristian Poessinger
An if statement was missing to check if there are really additional radius-settings or not.
2020-03-20sstp: T2008: migrate SSL certificate nodesChristian Poessinger
2020-03-20sstp: T2008: remove req-limit config nodeChristian Poessinger
Limiting the amount of requests passed to a server seems to be the wrong way to tackle a problem.
2020-03-20sstp: T2110: use uniform RADIUS CLI syntaxChristian Poessinger
- migrate RADIUS configuration to a more uniform syntax accross the system - authentication radius-server x.x.x.x to authentication radius server x.x.x.x - authentication radius-settings to authentication radius
2020-03-20sstp: T2008: dns: unwind configurationChristian Poessinger
2020-03-20sstp: T2008: move to vpn nodeChristian Poessinger