| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Fix execution bit for migration script
|
|
- Migrate to ddclient 3.11.1 and enforce debian/control dependency
- Add dual stack support for additional protocols
- Restrict usage of `porkbun` protocol, VyOS configuration structure
isn't compatible with porkbun yet
- Improve and cleanup error messages
|
|
`web-options` is only applicable when using HTTP(S) web request to
obtain the IP address. Apply guard for that.
|
|
Time interval in seconds to wait between DNS updates would be a bit
more intuitive as `interval` than `timeout`.
|
|
Found an odd behavior on Linux and the VyOS CLI implementation. If adding VXLAN
interfaces using iproute2 the MTU differs depending on the creation syntax:
ip -4 link add vxlan100 type vxlan dstport 4789 external df unset tos inherit \
ttl 16 nolearning vnifilter local 172.16.33.201
ip -4 link add vxlan200 type vxlan id 200 dstport 4789 local 172.16.33.201 dev eth0
ip -6 link add vxlan300 type vxlan id 300 dstport 4789 local 2001:db8:1::1 dev eth0
132: vxlan300: <BROADCAST,MULTICAST> mtu 1430 qdisc noop state DOWN group default qlen 1000
link/ether 4e:fb:e3:f5:d9:59 brd ff:ff:ff:ff:ff:ff
133: vxlan200: <BROADCAST,MULTICAST> mtu 1450 qdisc noop state DOWN group default qlen 1000
link/ether 0e:4e:f4:76:59:3f brd ff:ff:ff:ff:ff:ff
134: vxlan100: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether ba:b6:b7:0c:b1:37 brd ff:ff:ff:ff:ff:ff
VyOS always sets a default MTU of 1450 bytes which is correct for IPv4 p2p links
or multicast, but invalid for IPv6 p2p. Also this will break EVPN deployments
as ethernet bridges with MTU < 1500 bytes are less fun.
Increase default MTU to 1500 bytes. Migrate old configurations to use 1450
bytes if not specified otherwise on the CLI.
(cherry picked from commit 4a163b016333e58fee9d6ec6b53a09e0160b3213)
|
|
This complements commit f5e43b136 ("http: T5762: api: make API socket backend
communication the one and only default") so we have a consistent port CLI node
across VyOS components.
(cherry picked from commit 0e885f1bf01424130b6876e769cc42612b19351b)
|
|
Why: Smoketests fail as they can not establish IPv6 connection to uvicorn
backend server.
https://github.com/vyos/vyos-1x/pull/2481 added a bunch of new smoketests.
While debugging those failing, it was uncovered, that uvicorn only listens on
IPv4 connections
vyos@vyos# netstat -tulnp | grep 8080
(Not all processes could be identified, non-owned process info
will not be shown, you would have to be root to see it all.)
tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN -
As the CLI already has an option to move the API communication from an IP to a
UNIX domain socket, the best idea is to make this the default way of
communication, as we never directly talk to the API server but rather use the
NGINX reverse proxy.
(cherry picked from commit f5e43b1361fb59a9c260739bdb28729d5119507c)
|
|
IGMP and PIM are two different but related things.
FRR has both combined in pimd. As we use get_config_dict() and FRR reload it
is better to have both centrally stored under the same CLI node (as FRR does,
too) to just "fire and forget" the commit to the daemon.
"set protocols igmp interface eth1" -> "set protocols pim interface eth1 igmp"
(cherry picked from commit bc83fb097719f5c4c803808572f690fbc367b9e5)
|
|
parsing, and migration to valueless node for log and state matchers
|
|
firewal, nat and nat66.
(cherry picked from commit 51abbc0f1b2ccf4785cf7f29f1fe6f4af6007ee6)
|
|
As we have a bunch of options under "paramteres" already and "external" is
clearly one of them it should be migrated under that node as well.
(cherry picked from commit cc7ba8824a5e9ec818f0bbe7fb85e1713a591527)
|
|
interface-name|interface-group as in firewall.
(cherry picked from commit 2f2c3fa22478c7ba2e116486d655e07df878cdf4)
|
|
|
|
If ethernet interface is a bond memeber:
1. Allow for changing only specific parameters which are specified
in EthernetIf.get_bond_member_allowed_options function.
2. Added inheritable parameters from bond interface to ethernet
interface which are scpecified
in BondIf.get_inherit_bond_options.
Users can change inheritable options under ethernet interface
but in commit it will be copied from bond interface.
3. All other parameters are denied for changing.
Added migration script. It deletes all denied parameters under
ethernet interface if it is a bond member.
(cherry picked from commit aa0282ceb379df1ab3cc93e4bd019134d37f0d89)
|
|
Currently VyOS VXLAN implementation uses the Linux assigned port 8472 that
predates the IANA assignment. As Most other vendors use the IANA assigned port,
follow this guideline and use the new default port 4789.
Existing configuration not defining an explicit port number will be migrated
to the old default port number of 8472, keeping existing configurations work!
(cherry picked from commit 6db8d3ded19f652b99231be0d705d76b598ac72a)
# Conflicts:
# interface-definitions/include/version/interfaces-version.xml.i
|
|
|
|
(cherry picked from commit 4c4c2b1f8a58398798f20c252bde80461320d330)
|
|
Migrate policy local-route <destination|source> to node address
replace 'policy local-route{v6} rule <tag> destination|source <x.x.x.x>'
=> 'policy local-route{v6} rule <tag> destination|source address <x.x.x.x>'
(cherry picked from commit 9f7a5f79200782f7849cab72f55a39dedf45f214)
|
|
|
|
T5160: Firewall refactor
|
|
Q-in-Q interface
When migration from 1.3 to 1.4 and a user hat the following configured:
options {
interface eth0.10{
adjust-mss 1452
adjust-mss6 1432
}
}
The configuration was wrongly migrated to:
interfaces {
ethernet eth0.10 {
ipv6 {
adjust-mss "1432"
}
ip {
adjust-mss "1452"
}
}
Instead of
interfaces {
ethernet eth0 {
vif 10 {
ipv6 {
adjust-mss "1432"
}
ip {
adjust-mss "1452"
}
}
}
|
|
|
|
firewall ipv6 name ...> . Also fix some unexpected behaviour with geoip.
|
|
that contains fqnd and/or geo-ip in base chains. Fix mig script
|
|
|
|
smoketest
|
|
|
|
T5427: Fix migration script arguments len expects 2 args
|
|
Disabeled adding the peer with the same public key as the router has.
Added smoketest
|
|
The script's name is always provided as the first argument sys.argv[0]
Expected length for argv is 2 (script itself + config file)
Change: 'if (len(argv) < 1)' to 'if len(argv) < 2'
|
|
T5154: NTP: allow maximum of one ipv4 and one ipv6 address on paramet…
|
|
|
|
<listen-address>. Also allow only one single value <interface>.
|
|
policy: T5357: only delete migrated BGP community rules
|
|
* T5195: move run, cmd, call, rc_cmd helper to vyos.utils.process
* T5195: use read_file and write_file implementation from vyos.utils.file
Changed code automatically using:
find . -type f -not -path '*/\.*' -exec sed -i 's/^from vyos.util import read_file$/from vyos.utils.file import read_file/g' {} +
find . -type f -not -path '*/\.*' -exec sed -i 's/^from vyos.util import write_file$/from vyos.utils.file import write_file/g' {} +
* T5195: move chmod* helpers to vyos.utils.permission
* T5195: use colon_separated_to_dict from vyos.utils.dict
* T5195: move is_systemd_service_* to vyos.utils.process
* T5195: fix boot issues with missing imports
* T5195: move dict_search_* helpers to vyos.utils.dict
* T5195: move network helpers to vyos.utils.network
* T5195: move commit_* helpers to vyos.utils.commit
* T5195: move user I/O helpers to vyos.utils.io
|
|
|
|
Migrate:
high-availability virtual-server 203.0.113.1
to: high-availability virtual-server <name> address 203.0.113.1
|
|
|
|
... this is a step towards a new and better implementation that will utilize
VPP.
|
|
dns: T5144: Modernize dynamic dns operation (round 2)
|
|
Incorrect logic of node deletion now raises error, after T5251.
|
|
Create migration and bump package version from 0 -> 1 for dynamic dns
|
|
The node was already deleted in the 'if path exists' branch; attempt to
delete in 'else' branch will now raise an error.
|
|
|
|
|
|
This would allow using custom ports in name server operating on non-
default port for forwarding zones.
This is a follow-up to T5113 for sake of completeness and having
consistent treatment of all name servers configured in PowerDNS recursor.
Additionally, migrate `service dns forwarding domain example.com server`
to `service dns forwarding domain foo3.com name-server` for consistency
and reusability.
|
|
|
|
* removed unused `re` from imports
* replaced `return_value()` to `return_values()` for `remote-address`
because this is a multi-value configuration node
|
|
Tunnel interface multicast settings can be "enabled or disabled". As we prefer
valueless nodes, and the linux kernel default is "disabled" we should add a
set interfaces tunnel tunXX enable-multicast
command
|
