| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Commit 60c80df4 ("container: T4870: bump package version 0 -> 1 for filesystem
change") introduced a fundamental change in the container storage driver that
required a manual migration step from the user to not loose any data.
This commit removes the manual user interaction and temporary exports the
container images and re-imports them after the filesystem got changed. The only
things that get lost are orphaned container images no longer referenced by the
CLI - thats an adequate trade-off as those images can always be re-added to the
system.
|
|
move from vfs to overlay driver
The following pre iage upgrade script must be executed to have containers after
the reboot:
for pod in $(cli-shell-api listActiveNodes container name); do
systemctl stop vyos-container-${pod//\'}.service
done
sed -i 's/vfs/overlay/g' /etc/containers/storage.conf /usr/share/vyos/templates/container/storage.conf.j2
rm -rf /usr/lib/live/mount/persistence/container/storage/libpod
for pod in $(cli-shell-api listActiveNodes container name); do
image=$(cli-shell-api returnActiveValue container name ${pod//\'} image)
podman image pull $image
systemctl start vyos-container-${pod//\'}.service
done
for dir in vfs vfs-containers vfs-images vfs-layers; do
rm -rf /usr/lib/live/mount/persistence/container/storage/$dir
done
|
|
Migration for "remote-id" where peer is IPv4 or IPv6 address
was missed
It was only migration if peer starts with "@"
It cause that you must manualy set 'remote-id' to get it working
correctly
replace 'vpn ipsec site-to-site peer 192.0.2.2'
=> 'vpn ipsec site-to-site peer peer_192-0-2-2 authentication remote-id 192.0.2.2'
|
|
T4780: Firewall: add firewall groups in firewall. Extend matching cri…
|
|
so this new group can be used in inbound and outbound matcher
|
|
<name> interface <ifname>`
* Include refactor to policy route to allow for deletion of mangle table instead of complex cleanup
* T4605: Rename mangle table to vyos_mangle
|
|
|
|
This is to refactor ISIS segment routing to match up with OSPF segment routing.
|
|
Changed CLI syntax in route-map set community,
set large-community, set extcommunity
Allows to add multiple communities, large-communities
and extcommunities in clear view.
Added new well-known communities.
Added non-transitive feature in extcommunities.
Fixed community's validators.
|
|
ids: T4557: Migrate threshold and add new threshold types
|
|
Migrate "service ids ddos-protection threshold xxx" to
"service ids ddos-protection general threshold xxx"
Add new threshold types:
set service ids ddos-protection threshold tcp xxx
set service ids ddos-protection threshold udp xxx
set service ids ddos-protection threshold icmp xxx
|
|
|
|
In addition to the rewrite to make use of get_config_dict() the CLI is
slightly adjusted as specified in T4703.
* Rename vlan-id and vlan-range to simply vlan
* Rename network-mode to simply mode
* Re-use existing common Jinja2 template for Accel-PPP which are shared
with PPPoE and SSTP server.
* Retrieve default values via defaultValue XML node
|
|
The "authentication id" option for road-warriors did not get migrated to
the new local-id CLI node. This has been fixed.
|
|
When a CLI node is set with a migrator and is not a valueLess node, we need to
specify the "value" using the value= operation in config.set().
This fixes the config load error: vyos.configsession.ConfigSessionError: Invalid
config file (syntax error): error at line 353
|
|
The initial Accel-PPP PPPoE implementation used:
set service pppoe-server interface <name> vlan-id <id>
set service pppoe-server interface <name> vlan-range <start-stop>
This is actually a duplicated CLI node.
|
|
ipsec: T4118: Change vpn ipsec syntax for IKE ESP and peer
|
|
Migration and Change boolean nodes "enable/disable" to
disable-xxxx, enable-xxxx and just xxx for VPN IPsec
configurations
- IKE changes:
- replace 'ipsec ike-group <tag> mobike disable'
=> 'ipsec ike-group <tag> disable-mobike'
- replace 'ipsec ike-group <tag> ikev2-reauth yes|no'
=> 'ipsec ike-group <tag> ikev2-reauth'
- ESP changes:
- replace 'ipsec esp-group <tag> compression enable'
=> 'ipsec esp-group <tag> compression'
- PEER changes:
- replace: 'peer <tag> id xxx'
=> 'peer <tag> local-id xxx'
- replace: 'peer <tag> force-encapsulation enable'
=> 'peer <tag> force-udp-encapsulation'
- add option: 'peer <tag> remote-address x.x.x.x'
Add 'peer <name> remote-address <name>' via migration script
|
|
|
|
firewall node
* Refactor firewall and zone-policy rule creation and cleanup
* Migrate interface firewall values to `firewall interfaces <name> <direction> name/ipv6-name <name>`
* Remove `firewall-interface.py` conf script
|
|
bgp: T4257: Changing BGP "local-as" to "system-as"
This change is to change the global BGP name for the node "local-as" to "system-as"
This is needed so that there's less ambiguity with the local-as feature per neighbor.
bgp: T4257: Changing BGP "local-as" to "system-as"
bgp: T4257: Changing BGP "local-as" to "system-as"
This change is to change the global BGP name for the node "local-as" to "system-as"
This is needed so that there's less ambiguity with the local-as feature per neighbor.
|
|
As we have specific configuration for each plugin:
set service monitoring telegraf xxx
- azure-data-explorer
- prometheus-client
- splunk
We should to move configuration that related to influxdb under
influxdb node
Replace:
set service monitoring telegraf
- authentication xxx
- bucket xxx
- port xxx
- url
To:
set service monitoring telegraf influxdb xxx
|
|
After discussion with @zsdc this was decided the better long term fix
* Removes hourly logrotate cron in favour of systemd timer override
|
|
|
|
* Also determines and maps to correct CA for migrated CRL
|
|
|
|
|
|
|
|
The config vrf-basic reveals a missing block in the migration script
vrf/0-to-1, moving 'next-hop-vrf' to 'vrf'. As this only exists in
Sagitta, modify script 0-to-1. Also, fix the 'system nt' typo seen in
vrf-ospf.
|
|
Migration of bgp-azure-ipsec-gateway and bgp_dmvpn_hub reveals that
migration script ipsec/5-to-6 leaves the empty node 'ipsec-interfaces'
after moving the interface; fix the migration script, as it is not yet
in 1.3.
|
|
|
|
* set protocols static arp interface eth0 address 192.0.2.1 mac 01:23:45:67:89:01
|
|
present for DHCP
VyOS 1.4 still leverages PPPd internals on the CLI.
pppd supports three options for a default route, none, auto, force.
* none: No default route is installed on interface up
* auto: Default route is only installed if there is yet no default route
* force: overwrite any default route
There are several drawbacks in this design for VyOS and the users. If auto is
specified, this only counted for static default routes - but what about dynamic
ones? Same for force, only a static default route got replaced but dynamic ones
did not got taken into account.
The CLI is changed and we now re-use already existing nodes from the DHCP
interface configuration:
* no-default-route:
On link up no default route is installed, same as the previous
default-route none
* default-route-distance:
We can now specify the distance of this route for the routing table on the
system. This defaults to 210 as we have for DHCP interfaces. All this will be
migrated using a CLI migration script.
|
|
ocserv: T4231: Added OTP support for Openconnect 2FA
|
|
|
|
|
|
|
|
|
|
ike-group: T4288 : close-action is missing in swanctl.conf
|
|
close-action parameter is missing in the swanctl.conf file
|
|
|
|
|
|
After hardning the regex validator to be preceeded with ^ and ending with $
it was no longer possible to have a comma separated list as SSH ciphers. The
migrations cript is altered to migrate the previous comma separated list
to individual multi node entries - cipher and key-exchange always had been
multinodes - so this just re-arranges some values and does not break CLI
compatibility
|
|
|
|
|
|
|
|
|
|
firewall: T4178: T3873: tcp flags syntax refactor, intra-zone-filtering fix
|
|
* Add support for ECN and CWR flags
|
