summaryrefslogtreecommitdiff
path: root/src/migration-scripts
AgeCommit message (Collapse)Author
2021-08-21interfaces: T3090: migrate adjust-mss from "firewall options" to "interface" ↵Christian Poessinger
level Getting rid of "set firewall options" and move it from: set firewall options interface ethX adjust-mss 1400 set firewall options interface ethX adjust-mss6 1400 to: set interfaces ethernet ethX ip adjust-mss 1400 set interfaces ethernet ethX ipv6 adjust-mss 1400 In addition add an extra option called clamp-mss-to-pmtu instead of a value.
2021-08-15conntrack: T3275: migrate 'disable' syntax to 'enable' syntax for the new ↵Lulu Cathrinus Grimalkin
default behavior
2021-08-06migration: T548: Rename quagga scripts for correct seqViacheslav
Rename quagga migration scripts for correct sequences between 1.3 and 1.4 branches 7-to-8 in 1.3 uses the same migration as 8-to-9 in 1.4 This PR fix it
2021-07-25tunnel: T3366: re-order migration scriptsChristian Poessinger
The migrator from 20-to-21 is required as 19-to-20 on VyOS 1.3 - thus simply rename/reorder the two migrators to not break things the hard way when upgrading from 1.3 -> 1.4.
2021-07-22ipsec: T2816: remove "auto-update" CLI optionChristian Poessinger
Update/refresh of DNS records is now handled internally by Strongswan.
2021-07-22pki: https: T3642: Migrate HTTPS to use PKI configurationsarthurdev
2021-07-21pki: openvpn: T3642: Migrate OpenVPN to PKI and refactorsarthurdev
2021-07-20pki: eapol: T3642: Migrate EAPoL to use PKI configurationsarthurdev
2021-07-20pki: T3642: Fix Wireguard migration commentsarthurdev
2021-07-20pki: sstp: T3642: Migrate SSTP to PKI configurationsarthurdev
2021-07-20pki: openconnect: T3642: Migrate OpenConnect SSL to PKI configurationsarthurdev
2021-07-19pki: wireguard: T3642: Migrate Wireguard private key directly into CLIsarthurdev
Also renames peer pubkey to public-key for consistency
2021-07-17Merge pull request #927 from zdc/T3655-sagittaChristian Poessinger
VRF: T3655: proper connection tracking for VRFs
2021-07-17VRF: T3655: proper connection tracking for VRFszsdc
Currently, all VRFs share the same connection tracking table, which can lead to problems: - traffic leaks to a wrong VRF - improper NAT rules handling when multiple VRFs contain the same IP networks - stateful firewall rules issues The commit implements connection tracking zones support. Each VRF utilizes its own zone, so connections will never mix up. It also adds some restrictions to VRF names and assigned table numbers, because of nftables and conntrack requirements: - VRF name should always start from a letter (interfaces that start from numbers are not supported in nftables rules) - table number must be in the 100-65535 range because conntrack supports only 65535 zones
2021-07-17ipsec: T2816: migrate "ipsec interfaces" to "interface"Christian Poessinger
2021-07-15pki: ipsec: l2tp: T2816: T3642: Move IPSec/L2TP code into vpn_ipsec.py and ↵sarthurdev
update to use PKI.
2021-07-12vrf: route: static: T2450: we also need to migrate the interface based routesChristian Poessinger
Previously during migration if one had used interface routes, the VRF based ones got not migrated. The following "old" VyOS 1.3 configuration did not get migrated: set protocols static interface-route 10.20.0.0/24 next-hop-interface eth2 next-hop-vrf 'blue' set protocols static interface-route 10.30.0.0/24 next-hop-interface br10 next-hop-vrf 'red' set protocols vrf blue static interface-route 10.0.0.0/24 next-hop-interface eth1 next-hop-vrf 'default' set protocols vrf red static interface-route 10.0.0.0/24 next-hop-interface eth1 next-hop-vrf 'default' set vrf name blue table '3000' set vrf name mgmt table '1000' set vrf name red table '2000' It must get migrated to: set protocols static route 10.20.0.0/24 interface eth2 vrf 'blue' set protocols static route 10.30.0.0/24 interface br10 vrf 'red' set vrf name blue protocols static route 10.0.0.0/24 interface eth1 vrf 'default' set vrf name blue table '3000' set vrf name mgmt table '1000' set vrf name red protocols static route 10.0.0.0/24 interface eth1 vrf 'default' set vrf name red table '2000'
2021-07-07pki: T3642: Migrate rsa-keys to PKI configurationsarthurdev
2021-07-03ipsec: T2816: rework log options for debuggingChristian Poessinger
Renamed CLI from "logging log-modes" to "log subsystem" and "logging log-level" to "log level". THat is more human firendly.
2021-07-01pki: ipsec: T3642: Update migration script to account for file permission issuessarthurdev
2021-06-29pki: ipsec: T3642: Migrate IPSec to use PKI configurationsarthurdev
2021-06-17policy: T3631: migrate "set extcommunity-rt|soo" to "set extcommunity rt|soo"Christian Poessinger
migrate "set extcommunity-rt" and "set extcommunity-soo" to "set extcommunity rt|soo" to match FRR syntax. This also makes it easier to implement the "bandwidth" extended community.
2021-06-13wwan: T3620: reorder mirgation scripts for 1.3 backportChristian Poessinger
As the new WWAN interface style is backported to VyOS 1.3 we also need to shift the order of the interface migration scripts. so the same order from VyOS 1.4 also applies to VyOS 1.3. In short, 21-to-22 is renamed to 18-to-19 and all other migrators are shifted up one version.
2021-06-13wwan: T3620: adjust NAT inbound/outbound interfaces on config migrationChristian Poessinger
2021-06-13wwan: T3620: fix backup route metric in migration scriptChristian Poessinger
2021-06-13wwan: T3620: rename "wirelessmodem wlm" interfaces to new wwan interface treeChristian Poessinger
2021-06-07vti: T3588: remove interfaces not bound to IPSec tunnelChristian Poessinger
A VTI interface also requires an IPSec configuration - VyOS 1.2 supported having a VTI interface in the CLI but no IPSec configuration - drop VTI configuration if this is the case for VyOS 1.4.
2021-06-07ipsec: T3588: remove site-to-site tunnel CLI options only valid in OpenswanChristian Poessinger
2021-06-06ipsec: T3588: remove CLI options deprecated by strongSwanChristian Poessinger
- set vpn ipsec nat-traversal - set vpn ipsec nat-networks allowed-network
2021-06-06T1168: ipsec: add copyright header to migration scriptChristian Poessinger
2021-05-24router-advert: T3561: fix inconsistent use of tabs and spaces in indentationChristian Poessinger
Commit c17f259d ("router-advert: T3561: add support for specific routes") used tabs over spaces in the Migration script which triggered a TabError (inconsistent use of tabs and spaces in indentation").
2021-05-23router-advert: T3561: add support for specific routesMark Royds
Co-authored-by: Mark Royds <mark.royds@vitaminit.co.uk>
2021-05-20sysctl: T3565: initial implementation in XML and PythonChristian Poessinger
migrate from old vyatta-cfg-system / Perl implementation.
2021-05-14conntrack: T3535: remove cluster CLI nodesChristian Poessinger
2021-05-14conntrack: T3535: migrate codebase from vyatta-conntrack-syncChristian Poessinger
2021-05-14ntp: T2809: Fix migration script if server not existsever-sever
2021-03-30bgp: T1711: remove migrator debug printChristian Poessinger
2021-03-29bgp: T1711: remove ASN tagNode and move to "local-as"Christian Poessinger
Every time when set configuration bgp, you need set AS number. There is very less benefit in this system so the AS number is moved from a tagNode level down to a leafNode with the name "local-as", same as on the neighbor or peer-group level. This changes the CLI configuration from: set protocols bgp 100 neighbor 10.10.1.2 remote-as 200 to set protocols bgp local-as 100 set protocols bgp neighbor 10.10.1.2 remote-as 200
2021-03-29isis: T3417: fix invalid call to exit() in migration scriptChristian Poessinger
2021-03-21isis: T3417: drop artificial "domain" node identifying the IS-IS process nameChristian Poessinger
As we and FRR do not support multiple FRR process instances, there is no need to make this configurable for a user. We rather rely on a solid default "VyOS".
2021-03-21isis: T3417: move from cli tagNode to nodeChristian Poessinger
As there can only be one running IS-IS process (FRR limitation) there is no need in having a tagNode here. This adds artifical restrictions/limitations when moving on to support VRFs for IS-IS protocol.
2021-03-14vrf: T3344: move dynamic routing protocols under "vrf name <name> protocols"Christian Poessinger
Instead of having the dynamic routing protocols OSPF and BGP residing under the "protocols vrf <name> [ospf|bgp]" nodes, rather move them directly under the "vrf name <name> protocols [ospf|bgp]" node. Now all VRF related parts are placed under the same root node. This eases the verify steps tremendously, as we do not need to check wheter a VRF eists or not, it will always exist as we operate under a child node.
2021-03-09Merge pull request #762 from jack9603301/T2518Christian Poessinger
nptv6: T2518: Support IPv6 address translation
2021-03-09nptv6: T2518: Support masquerade and cancel new migratorsjack9603301
2021-03-08bgp: T3391: migrate old IPv4 only maximum-paths config to new syntaxChristian Poessinger
2021-03-09nptv6: T2518: Support IPv6 address translationjack9603301
2021-02-28l2tpv3: T3366: migrate local-ip and remote-ip CLI optionsChristian Poessinger
Rename CLI options local-ip to source-address and remote-ip to remote to get a consistent CLI experience for the user.
2021-02-28tunnel: T3366: rename remote-ip to remoteChristian Poessinger
Streamline the CLI configuration where we try to use remote on other interfaces like vxlan, geneve.
2021-02-28tunnel: T3366: rename local-ip to source-addressChristian Poessinger
Streamline the CLI configuration where we try to use source-address when creating connections which are especially sourced from a discrete address.
2021-02-28tunnel: T3364: rename encapsulation mode "gre-bridge" to "gretap"Christian Poessinger
The following list shows the mapping of VyOS tunnel encapsulation modes to the corresponding Linux modes. VyOS Linux gre gre gre-bridge gretap ipip ipip ipip6 ipip6 ip6ip6 ip6ip6 ip6gre ip6gre sit sit Besides gre-bridge this is pretty consistent. As bridge interfaces are also called tap interfaces gre-bridge will be renamed to gretap to make the post-processing much easier. This means (in detail) that there are no more child classes of _Tunnel and there will be now one geneirc TunnelIf class handling all sorts of encapsulation.