| Age | Commit message (Collapse) | Author |
|---|
|
|
|
update to use PKI.
|
|
Previously during migration if one had used interface routes, the VRF based
ones got not migrated.
The following "old" VyOS 1.3 configuration did not get migrated:
set protocols static interface-route 10.20.0.0/24 next-hop-interface eth2 next-hop-vrf 'blue'
set protocols static interface-route 10.30.0.0/24 next-hop-interface br10 next-hop-vrf 'red'
set protocols vrf blue static interface-route 10.0.0.0/24 next-hop-interface eth1 next-hop-vrf 'default'
set protocols vrf red static interface-route 10.0.0.0/24 next-hop-interface eth1 next-hop-vrf 'default'
set vrf name blue table '3000'
set vrf name mgmt table '1000'
set vrf name red table '2000'
It must get migrated to:
set protocols static route 10.20.0.0/24 interface eth2 vrf 'blue'
set protocols static route 10.30.0.0/24 interface br10 vrf 'red'
set vrf name blue protocols static route 10.0.0.0/24 interface eth1 vrf 'default'
set vrf name blue table '3000'
set vrf name mgmt table '1000'
set vrf name red protocols static route 10.0.0.0/24 interface eth1 vrf 'default'
set vrf name red table '2000'
|
|
|
|
Renamed CLI from "logging log-modes" to "log subsystem" and "logging log-level"
to "log level". THat is more human firendly.
|
|
|
|
|
|
migrate "set extcommunity-rt" and "set extcommunity-soo" to "set extcommunity
rt|soo" to match FRR syntax. This also makes it easier to implement the
"bandwidth" extended community.
|
|
As the new WWAN interface style is backported to VyOS 1.3 we also need to shift
the order of the interface migration scripts. so the same order from VyOS 1.4
also applies to VyOS 1.3.
In short, 21-to-22 is renamed to 18-to-19 and all other migrators are shifted
up one version.
|
|
|
|
|
|
|
|
A VTI interface also requires an IPSec configuration - VyOS 1.2 supported
having a VTI interface in the CLI but no IPSec configuration - drop VTI
configuration if this is the case for VyOS 1.4.
|
|
|
|
- set vpn ipsec nat-traversal
- set vpn ipsec nat-networks allowed-network
|
|
|
|
Commit c17f259d ("router-advert: T3561: add support for specific routes") used
tabs over spaces in the Migration script which triggered a TabError (inconsistent
use of tabs and spaces in indentation").
|
|
Co-authored-by: Mark Royds <mark.royds@vitaminit.co.uk>
|
|
migrate from old vyatta-cfg-system / Perl implementation.
|
|
|
|
|
|
|
|
|
|
Every time when set configuration bgp, you need set AS number. There is very
less benefit in this system so the AS number is moved from a tagNode level down
to a leafNode with the name "local-as", same as on the neighbor or peer-group
level.
This changes the CLI configuration from:
set protocols bgp 100 neighbor 10.10.1.2 remote-as 200
to
set protocols bgp local-as 100
set protocols bgp neighbor 10.10.1.2 remote-as 200
|
|
|
|
As we and FRR do not support multiple FRR process instances, there is no need
to make this configurable for a user. We rather rely on a solid default "VyOS".
|
|
As there can only be one running IS-IS process (FRR limitation) there is no need
in having a tagNode here. This adds artifical restrictions/limitations when
moving on to support VRFs for IS-IS protocol.
|
|
Instead of having the dynamic routing protocols OSPF and BGP residing under
the "protocols vrf <name> [ospf|bgp]" nodes, rather move them directly under
the "vrf name <name> protocols [ospf|bgp]" node. Now all VRF related parts
are placed under the same root node.
This eases the verify steps tremendously, as we do not need to check wheter a
VRF eists or not, it will always exist as we operate under a child node.
|
|
nptv6: T2518: Support IPv6 address translation
|
|
|
|
|
|
|
|
Rename CLI options local-ip to source-address and remote-ip to remote to
get a consistent CLI experience for the user.
|
|
Streamline the CLI configuration where we try to use remote on other interfaces
like vxlan, geneve.
|
|
Streamline the CLI configuration where we try to use source-address when
creating connections which are especially sourced from a discrete address.
|
|
The following list shows the mapping of VyOS tunnel encapsulation modes to the
corresponding Linux modes.
VyOS Linux
gre gre
gre-bridge gretap
ipip ipip
ipip6 ipip6
ip6ip6 ip6ip6
ip6gre ip6gre
sit sit
Besides gre-bridge this is pretty consistent. As bridge interfaces are also
called tap interfaces gre-bridge will be renamed to gretap to make the
post-processing much easier.
This means (in detail) that there are no more child classes of _Tunnel and
there will be now one geneirc TunnelIf class handling all sorts of encapsulation.
|
|
|
|
|
|
When moving from Quagga to FRR the BGP address-family was extended by an
invalid peer-group statement. FRR always moved a configured peer-group
from the AFI level down to the neighbor level.
With the migration to FRR reload we must take care about this by ourselves.
|
|
|
|
|
|
|
|
|
|
|
|
Commit 0f8beae7426 ("system: T2486: migrate disable-dhcp-nameservers to
name-servers-dhcp") added a migration script for moving the name-servers.
A small glitch was introduced when referencing vif-c interfaces unter a vif-s
interface where a variable got referenced which was not defined.
|
|
If the RPKI cache name equals the configured address, renaming is not possible,
as rename expects the new path to not exist.
|
|
new CLI
|
|
|
|
When per interface OSPF configuration is migrated into "protocols ospf interface"
we should cleanup and empty ip {} node unter the individual interface. This
makes the config look more nicely.
|
|
(cherry picked from commit 32822d5e1831dff5cd904c0cb5886f7d737afab6)
|
