| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
firewall: T6257: Show member information for dynamic groups in op-mode
|
|
T6267: Check interface wireless module before apply config
|
|
openconnect: T4982: Support defining minimum TLS version in openconnect VPN
|
|
Check if the wireless device/modem exists in the system and the
module `ieee802111` was loaded
In cases where we do not have wireless devices, it prevents the
unexpected traceback
```
set interfaces wireless wlan0 address 192.0.2.5/32
commit
Traceback (most recent call last):
File "/usr/libexec/vyos/conf_mode/interfaces_wireless.py", line 269, in <modu>
c = get_config()
^^^^^^^^^^^^
File "/usr/libexec/vyos/conf_mode/interfaces_wireless.py", line 104, in get_cg
tmp = find_other_stations(conf, base, wifi['ifname'])
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/libexec/vyos/conf_mode/interfaces_wireless.py", line 54, in find_os
for phy in os.listdir('/sys/class/ieee80211'):
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
FileNotFoundError: [Errno 2] No such file or directory: '/sys/class/ieee80211'
```
|
|
|
|
Throwing Warning message instead of Error if interface which is
used in pppoe/ipoe does not exist.
|
|
|
|
|
|
T6263: Groups 224.0.0.0/24 are reserved and cannot be joined
|
|
qos: T4248: Allow to remove the only rule from the qos class
|
|
The join addresses within the multicast group 224.0.0.0/24 are
reserved and cannot be joined
FRR
```
r4(config)# interface eth2
r4(config-if)# ip igmp join 224.0.0.0 224.0.0.10
% Configuration failed.
Error type: validation
Error description: Groups within 224.0.0.0/24 are reserved and cannot be joined
r4(config-if)#
```
Add verify check
|
|
Not all FRR address-families compatibe with VRF
```
r4# conf t
r4(config)# router bgp 65001 vrf bgp
r4(config-router)#
r4(config-router)# address-family ipv4 flowspec
Only Unicast/Multicast/EVPN SAFIs supported in non-core instances.
r4(config-router)#
r4(config-router)# address-family ipv4 labeled-unicast
Only Unicast/Multicast/EVPN SAFIs supported in non-core instances.
r4(config-router)#
r4(config-router)# address-family ipv4 vpn
Only Unicast/Multicast/EVPN SAFIs supported in non-core instances.
r4(config-router)#
```
Add verify AFI for VRF
|
|
PKI: T6259: Support RFC822 names in certificate generation
|
|
T6217: Conntrack-sync change the actual name of the script
|
|
This fix for bug when `sudo` commands were not send to the remote
syslog server. They stop before the directive that includes all
configurations `$IncludeConfig /etc/rsyslog.d/*.conf`
|
|
The actual name of the script is `vyos-vrrp-conntracksync.sh`
|
|
image-tools: T6260: remove persistence image directory if no space error
|
|
Connect_disconnect: T6261: correction to typo in check_ppp_running function
Changes include:
1. Replaces "beeing" -> being in print statement for check_ppp_running
2. Replaces "can not" -> cannot in print statement on lines 61 and 93
|
|
|
|
|
|
vyos.utils: T6244: add whitespace after time unit in uptime
|
|
$ touch /tmp/vyos.smoketest.debug
will enable dynamic debugging of the smoketests - showing the appropriate CLI
commands on stdout
|
|
|
|
|
|
|
|
T6221: Return default ip rule values after deleting VRF
|
|
|
|
Fix for restoring default ip rule values after deleting VRF
Defult values:
```
$ ip rule
0: from all lookup local
32766: from all lookup main
32767: from all lookup default
```
After adding and deleting a VRF we get unexpected values:
```
$ ip rule
1000: from all lookup [l3mdev-table]
2000: from all lookup [l3mdev-table] unreachable
32765: from all lookup local
32766: from all lookup main
32767: from all lookup default
```
|
|
|
|
T5722: Failover route add option onlink
|
|
T6242: load-balancing reverse-proxy: Ability for ssl backends to not verify server certificates
|
|
|
|
server certificates
|
|
pki: T6241: Fix dependency updates on PKI changes
|
|
onlink pretend that the nexthop is directly attached to this link,
even if it does not match any interface prefix.
Useful when gateway not in the same interface network
set interfaces ethernet eth0 vif 10 address '10.20.30.1/32'
set protocols static route 10.20.30.0/32 interface eth0.10
set protocols failover route 192.0.2.11/32 next-hop 10.20.30.0 onlink
```
vyos@r4# sudo ip route add 192.0.2.111/32 via 10.20.30.0 dev eth0.10 metric 1 proto failover
Error: Nexthop has invalid gateway.
[edit]
vyos@r4#
[edit]
vyos@r4# sudo ip route add 192.0.2.111/32 via 10.20.30.0 dev eth0.10 onlink metric 1 proto failover
[edit]
vyos@r4#
```
|
|
T5535: firewall: migrate command <set system ip disable-directed-broadcast> to firewall global-optinos
|
|
|
|
to firewall global-optinos
|
|
Check if DH is configured for OpenVPN but does not exist in the
PKI section
```
set pki dh dh-correct parameters 'xxxx'
set interfaces openvpn vtun10 tls dh-params 'dh-fake'
File "/usr/libexec/vyos/conf_mode/interfaces_openvpn.py", line 208, in verify_pki
pki_dh = pki['dh'][tls['dh_params']]
~~~~~~~~~^^^^^^^^^^^^^^^^^^
KeyError: 'dh-fake'
```
|
|
T6100: Added NAT migration from IP/Netmask to Network/Netmask
|
|
|
|
fails (#3296)
|
|
Added NAT migration from IP/Netmask to Network/Netmask.
In 1.3 allowed using IP/Netmask in Nat rules.
In 1.4 and 1.5 it is prohibited. Allowed Network/Netmask.
|
|
firewall: T6216: replace plus symbols (allowed by IPset but not NFT) in group names with underscores
|
|
T5169: Add PoC for generating CGNAT rules rfc6888
|
|
errors when using character <+> in 1.3 in firewall groups and custom firewall chains.
|
|
|
|
Add PoC for generating CGNAT rules
https://datatracker.ietf.org/doc/html/rfc6888
Not all requirements are implemented, but some of them.
Implemented:
REQ-2
```
A CGN MUST have a default "IP address pooling" behavior of "Paired"
CGN must use the same external IP
address mapping for all sessions associated with the same internal
IP address, be they TCP, UDP, ICMP, something else, or a mix of
different protocols.
```
REQ-3
```
The CGN function SHOULD NOT have any limitations on the size
or the contiguity of the external address pool
```
REQ-4
```
A CGN MUST support limiting the number of external ports (or,
equivalently, "identifiers" for ICMP) that are assigned per
subscriber
```
CLI:
```
set nat cgnat pool external ext1 external-port-range '1024-65535'
set nat cgnat pool external ext1 per-user-limit port '1000'
set nat cgnat pool external ext1 range 192.0.2.222/32
set nat cgnat pool internal int1 range '100.64.0.0/28'
set nat cgnat rule 10 source pool 'int1'
set nat cgnat rule 10 translation pool 'ext1'
```
|
