summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2020-11-10bridge: T3042: Support VLAN filter and VLAN sub-interface on the bridgejack9603301
2020-11-08mpls-conf: T915: Add targeted LDP neighbors with parametersCheeze_It
The commit has to do with the addition of targeted LDP neighbors and parameters being added. FRR allows for this functionality and I just wanted to add it. We have basically 4 options that are added. Enabling targeted LDP functionality, the targeted neighbor, the hello interval of targeted sessions, and the hold time of targeted sessions. Both IPv4 and IPv6 has been coded in.
2020-11-06op-mode: T2731: fix "show interfaces" returns invalid state when link is downChristian Poessinger
There has been a miss-match of admin-down and oper-down status for the Python implementation of "show interfaces".
2020-11-06validator: ipv4-range: T3050: fix wrong exit code when no range was givenChristian Poessinger
2020-11-06system: T3048: use proper service name "tuned.service"Christian Poessinger
2020-11-06system: T3048: add dynamic performance tuning daemonChristian Poessinger
Add new CLI command "set system options performance <latency | throughput>"
2020-11-06openvpn: T3051: fix multiple pushed routes to preconfigured clientsChristian Poessinger
2020-11-04mpls-conf: T915: Add session hold time adjustment for static LDP neighborsCheeze_It
The commit has to do with the addition of session hold time parameter for LDP neighbors. This allows for being able to change said hold time on a static neighbor. The way that this works is to have it either delegated to a value (15-65535), or to just be default to whatever FRR stipulates or per the other session configuration values. I opted to remove the "-ipv4-" only because we know it's an IPv4 session that one has to create first. I figure it's redundant to add it there so I removed it.
2020-11-04Merge pull request #595 from Cheeze-It/currentChristian Poessinger
mpls-conf: T915: Add TTL security for static LDP neighbors
2020-11-04mpls-conf: T915: Add TTL security for static LDP neighborsCheeze_It
The commit has to do with the addition of TTL security for LDP neighbors. The code was 90% done by Viascheslav. I modified it a little bit to get it to properly work. We added more parameters to the neighbors dynamic loop. Once this is merged then we should be able to add more for the dynamic neighbor statements. The way that this works is to have either TTL disabled, or to add the amount of hops accepted for the neighbor.
2020-11-04openvpn: T3046: create client config dir on-demandChristian Poessinger
This commit partially reverts commit eb1ed5e518 ("openvpn: T2994: re-add ifconfig-pool statement in server config").
2020-11-03Merge branch 'wifi-wpa3' of github.com:c-po/vyos-1x into currentChristian Poessinger
* 'wifi-wpa3' of github.com:c-po/vyos-1x: wireless: T3042: move wifi-regulatory-domain into individual interface definition wireless: T2653: reset wireless priority to crux state wireless: T3034: add WPA3 support wireless: T3043: rename "wpa mode both" to "wpa+wpa2" ifconfig: T2985: fix wireless-bridge creation
2020-11-03wireless: T3042: move wifi-regulatory-domain into individual interface ↵Christian Poessinger
definition
2020-11-03Merge pull request #585 from Cheeze-It/currentChristian Poessinger
mpls-conf: T915: Separate IPv4 and IPv6 hello timers, add IPv6 timers
2020-11-03T2465: Fixing permissions on socket so DHCP workskroy
2020-11-03wireless: T3043: rename "wpa mode both" to "wpa+wpa2"Christian Poessinger
2020-11-01openvpn: T2994: re-add ifconfig-pool statement in server configChristian Poessinger
Re-organize the template code and add addtitional Jinja2 filters for processing the ifconfig-pool statement. This reverts the changes from commit 7e546be9 ("openvpn: T2994: temporary revert to 1.2 crux behavior for client pools").
2020-11-01test: extend validate testcasesChristian Poessinger
Test additional network combinations of address and prefixes.
2020-11-01openvpn: T2994: remove workarounds for individual ipv4 and ipv6 keysChristian Poessinger
Remove workaround which split (local|remote)_address and also subnet keys into individual keys for the assigned IP address family (4/6). During template rendering check IP version by introducing new ipv4 and ipv6 Jinja2 filters {% if foo | ipv4 %} or {% if bar | ipv6 %} options.
2020-11-01test: adjust testcase name for vyos.util.dict_search()Christian Poessinger
After renaming the function in commit 25551c5a ("vyos.util: T2995: rename vyos_dict_search() -> dict_search()"), the test case should be renamed, too.
2020-11-01test: vyos.validate: add unittestsChristian Poessinger
2020-10-30openvpn: T2994: verify DH key lengthChristian Poessinger
2020-10-30openvpn: T2994: migrate to get_config_dict()Christian Poessinger
2020-10-30vyos.util: T2995: change comment style for "make test" outputChristian Poessinger
2020-10-30ssh: T2635: reuse common verify_vrf() functionChristian Poessinger
2020-10-28vyos.util: T2995: rename vyos_dict_search() -> dict_search()Christian Poessinger
Renamed using snippet below: ---------------------------- for file in $(find . -name "*.py") do sed -i "s/vyos_dict_search/dict_search/" $file done
2020-10-28qat: T2968: adjust to C200xx PCI ID from Intel driversChristian Poessinger
2020-10-27mpls-conf: T915: Separate IPv4 and IPv6 hello timers, add IPv6 timersCheeze_It
The commit has to do with separating the hello/hold timers from being only IPv4 to being both IPv4 and IPv6. I renamed the existing hello and hold timers with an "-ipv4" and added ones that were "-ipv6". I did verify that the commands properly commit under FRR as well. I also added some room on the protocols_mpls.py file for the different variables as it seems we're might end up having longer names. Removed some spaces that I found too that weren't needed on ldpd.frr.tmpl as well.
2020-10-27Merge pull request #584 from sever-sever/T2387_octChristian Poessinger
bgp: T2387: Fix XML sheme for new bgp and bgp.py handler
2020-10-27Merge pull request #581 from sever-sever/T2631Christian Poessinger
accel: T2631: Add option for radius disable-accounting
2020-10-27bgp: T2387: Fix XML sheme for new bgp and bgp.py handlersever-sever
2020-10-27accel: T2631: Add option for radius disable-accountingsever-sever
2020-10-25test: vyos.template: add testcase for vyos_*_from_cidr() convertersChristian Poessinger
2020-10-25test: import cleanupChristian Poessinger
2020-10-24Revert "test: vyos.util: add testcase for process_named_running()"Christian Poessinger
This reverts commit 9939139ba4ad18dc4b62a827d8ab7b74d0c28124. Unfortunately this test does not work within the CI system. It fails with: 17:21:35 ====================================================================== 17:21:35 FAIL: test_process_named_running (test_util.TestVyOSUtil) 17:21:35 ---------------------------------------------------------------------- 17:21:35 Traceback (most recent call last): 17:21:35 File "/var/lib/jenkins/jenkins_slave/workspace/vyos-1x_current/build/src/tests/test_util.py", line 34, in test_process_named_running 17:21:35 self.assertTrue(isinstance(pid, int)) 17:21:35 AssertionError: False is not true As process_named_running() returns None on non existing bash process
2020-10-24vpn: l2tp: T3009: fix non effective "authentication require" optionChristian Poessinger
The CLI node was read in incorrect (wrong path). In addtition the list was not reset to [] when authentication was specified on the CLI.
2020-10-24test: vyos.util: add testcase for process_named_running()Christian Poessinger
2020-10-24test: vyos.util: add testcase for find_device_file()Christian Poessinger
2020-10-21http-api: T3007: use ConfigSession config load script, not backend loadJohn Estabrook
2020-10-21load-config: T2138: support loading gzipped (local) config filesJohn Estabrook
2020-10-19unittests: T2995: vyos_dict_search() must return None on non-existing keysChristian Poessinger
The current wversion unfortunately will raise a KeyError: >>> data = {} >>> vyos_dict_search('foo', data) Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/lib/python3/dist-packages/vyos/util.py", line 685, in vyos_dict_search return dict[path] KeyError: 'foo'
2020-10-19unittests: cleanup unused importsChristian Poessinger
2020-10-18openvpn: T2969: ensure interface is always removedChristian Poessinger
2020-10-18openvpn: T2969: force creation of tunnel interfacesChristian Poessinger
A lot of VyOS code requires the Kernel interface to be present in order to properly work and adjust the interface to the users CLI intends (alias, ipv6, vrf - just to name a few). OpenVPN - when run in client mode - only creates the interface (e.g. vtun1) when the connection to the OpenVPN server was successful. This can't be always the case due to e.g. software-updates or routing issues to the remote side. This will in the end result in a zombie OpenVPN client interface where some config items might not have been set when the interface finally comes up - imagine a wrong assigned VRF instance. By always creating the OpenVPN interface manuall we ensure that all the CLI settings are properly configured in the OS kernel.
2020-10-18op-mode: lldp: T2993: Fixup 'show lldp neighbors'Benjamin M. Hughes
Check that interfaces have been returned from lldpcli to prevent trace when no interfaces are enabled for lldp.
2020-10-18Merge pull request #577 from bmhughes/fix-show-lldp-neighborsDaniil Baturin
op-mode: lldp: T2993: Fix 'show lldp neighbors'
2020-10-18op-mode: lldp: T2993: Fix 'show lldp neighbors'Benjamin M. Hughes
'show lldp neighbors' fails with: Traceback (most recent call last): File "./lldp_op.py", line 122, in <module> config_text = tmpl.render(parse_data(neighbors)) File "./lldp_op.py", line 51, in parse_data for local_if, values in tmp.items(): AttributeError: 'str' object has no attribute 'items' `parse_data` was expecting data to be provided as a dict within an array which doesn't match the format from the parsed json output of lldpcli. Change `parse_data` and `main` to use a dict alone for passing interface neighbors for rendering.
2020-10-17ifconfig: T2985: support on demand bridge creationChristian Poessinger
The current implementation for bridge based interfaces has an issue which is caused by priority inheritance. We always assumed that the bridge interface will be created last, but this may not be true in all cases, where some interfaces will be created "on demand" - e.g. OpenVPN or late (VXLAN, GENEVE). As we already have a bunch of verify steps in place we should not see a bridge interface leak to the underlaying infrastructure code. This means, whenever an interface will be member of a bridge, and the bridge does yet not exist, we will create it in advance in the interface context, as the bridge code will be run in the same commit but maybe sooner or later. This will also be the solution for T2924.
2020-10-17syslog: T2938: Add format octet-counted for syslog conf-modesever-sever
2020-10-15conf-mode: T915: Add mpls ldp explicit and holdtime commandssever-sever