summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2021-10-21dhcp-server: T3610: Allow configuration for non-primary ip addressViacheslav
2021-10-18Merge pull request #1022 from sever-sever/T3897Christian Poessinger
ddclient: T3897: Add option for IPv6 Dynamic DNS
2021-10-18ddclient: T3897: Add option for IPv6 Dynamic DNSViacheslav
2021-10-16l2tp: T3724: allow setting accel-ppp l2tp host-nameMarek Isalski
2021-10-15containers: T3676: Allow to set capabilitiesViacheslav
2021-10-12validators: T3868: Allow asterisk symbol in bgp-large-community-listViacheslav
2021-10-11vyos.configdict: T2653: do not merge in defaults when interface is deletedChristian Poessinger
It makes less to zero sense to blend in the default values of an interface when it is about to be deleted from the system anyways - this makes the entire dict just cleaner and easier to debug.
2021-10-08tunnel: T3893: harden logic when validating tunnel parametersChristian Poessinger
Different types of tunnels have different keys set in get_interface_config(). Thus it should be properly verified (by e.g. using dict_search()) that the key in question esits to not raise KeyError.
2021-10-04bgp: T3741: "parameter default no-ipv4-unicast" is now a default optionChristian Poessinger
2021-10-04T3889: Revert "dhcpv6-pd: T421: disable wide dhcpv6 client debug messages"Christian Poessinger
This reverts commit 6b48900358ce9b01eaa78e3a086e95a26064f0df.
2021-10-02dns: forwarding: T3882: remove deprecated code to work with PowerDNS 4.5Christian Poessinger
(cherry picked from commit 8e6c48563d1612916bd7fcc665d70bfa77ec5667)
2021-09-30interface-names: T3869: update udev rulesJohn Estabrook
2021-09-27interface-names: T3869: add vyos_net_nameJohn Estabrook
2021-09-27interface-names: T3869: add vyos_interface_rescanJohn Estabrook
2021-09-27nat66: T3863: ndppd requires interfaces to be presentChristian Poessinger
2021-09-27frr: T2175: rename daemon Jinja2 templates to match (d)aemon suffixChristian Poessinger
2021-09-26T3866: ignore interfaces without "address" in DNS forwarding migrationDaniil Baturin
2021-09-26op-mode: pki: T3826: perform input validation when listing certificatesChristian Poessinger
2021-09-26op-mode: reboot/poweroff: T3857: send wall message to all usersChristian Poessinger
2021-09-25ipsec: T2816: ipsec-dhclient-hook should only run if swanctl.conf existsChristian Poessinger
2021-09-25ipsec: T2816: ipsec-dhclient-hook should use exit(0)Christian Poessinger
2021-09-25ipsec: T2816: ipsec-dhclient-hook should use vyos.util.read_file() / ↵Christian Poessinger
write_file()
2021-09-23openvpn: T3642: Fix password_protected checkNicolas Riebesel
2021-09-22vrrp: keepalived: T3847: enable no_tag_node_value_mangle for get_config_dict()Christian Poessinger
Commit 761631d6 ("vrrp: keepalived: T3847: migrate to get_config_dict()") switched to the new python function get_config_dict(), when we deal with tag nodes that can contain a hyphen, we should also set no_tag_node_value_mangle in order to preserve it. This caused a dict lookup error as the hyphens in the test scripts got replaced by an _.
2021-09-21vrrp: keepalived: T3847: migrate/streamline CLI optionsChristian Poessinger
Rename virtual-address -> address as we always talk about an IP address.
2021-09-21vrrp: keepalived: T3847: remove "transition-script mode-force" optionChristian Poessinger
2021-09-21vrrp: keepalived: T3847: migrate to get_config_dict()Christian Poessinger
2021-09-21vrrp: keepalived: T616: move configuration to volatile /run directoryChristian Poessinger
Move keepalived configuration from /etc/keepalived to /run/keepalived.
2021-09-21vrrp: keepalived: T2720: adjust to Jinja2 trim_blocks featureChristian Poessinger
This is a successor to commit a2ac9fac16e ("vyos.template: T2720: always enable Jinja2 trim_blocks feature"). It only shifts the whitespaces / indents inside the keepalived configuration file.
2021-09-19ipsec: T1441: Clean up vti-up-down script for XFRM interfacesLucas Christian
2021-09-19dhcp-server: T3672: migrate failover name optionChristian Poessinger
Commit 2985035b (dhcp-server: T3672: re-add missing "name" CLI option) unfortunately did not add the name option to the migration script.
2021-09-19dhcp-server: T3672: re-add missing "name" CLI optionChristian Poessinger
This option is mandatory and must be user configurable as it needs to match on both sides.
2021-09-19dhcp-server: T3672: only one failover peer is supportedChristian Poessinger
2021-09-19op-mode: nat: T3648: Fix NAT script errorsjack9603301
2021-09-18container: T2216: add IPv6 support to container networksChristian Poessinger
2021-09-18dhcp-server: T3838: rename dns-server to name-server nodeChristian Poessinger
IPv4 DHCP uses "dns-server" to specify one or more name-servers for a given pool. In order to use the same CLI syntax this should be renamed to name-server, which is already the case for DHCPv6.
2021-09-18dhcp-server: T1968: allow multiple static-routes to be configuredChristian Poessinger
vyos@vyos# show service dhcp-server shared-network-name LAN { subnet 10.0.0.0/24 { default-router 10.0.0.1 dns-server 194.145.150.1 lease 88 range 0 { start 10.0.0.100 stop 10.0.0.200 } static-route 192.168.10.0/24 { next-hop 10.0.0.2 } static-route 192.168.20.0/24 { router 10.0.0.2 } } }
2021-09-18validator: T2417: bugfix on Python3 f'ormat stringsChristian Poessinger
Commit 3639a5610b590a ("validator: T2417: try to make the code clearer") introduced Python3 f'ormatted strings but missed the "f" keyword.
2021-09-17Merge pull request #1007 from erkin/currentChristian Poessinger
T3823: Stop strip-private regexp from swallowing quotes
2021-09-17T3823: Stop strip-private regexp from swallowing quoteserkin
2021-09-15ipsec: T3830: "authentication id|use-x509-id" are mutually exclusiveChristian Poessinger
Manually set peer id and use-x509-id are mutually exclusive!
2021-09-14dhcpv6-pd: T421: disable wide dhcpv6 client debug messagesChristian Poessinger
2021-09-11Fix inconsistent capitalization in the show version outputDaniil Baturin
2021-09-10wireguard: T3642: directly import keys to CLI when run in config modeChristian Poessinger
vyos@vyos# run generate pki wireguard key-pair install interface wg10 "generate" CLI command executed from config session. Generated private-key was imported to CLI! Use the following command to verify: show interfaces wireguard wg10 Corresponding public-key to use on peer system is: 'hGaWcoG7f+5sPAUY/MNQH1JFhsYdsGTecYA9S2J8xGs=' vyos@vyos# run generate pki wireguard preshared-key install interface wg10 peer vyos "generate" CLI command executed from config session. Generated preshared-key was imported to CLI! Use the following command to verify: show interfaces wireguard wg10 vyos@vyos# show interfaces wireguard wg10 +peer vyos { + preshared-key OwTALZy8w6VIBMxUwbOv6Ys7QMyhrtY4aw+0cUjmmCw= +} +private-key 0Pu95CejvCUCCwrTW39TCYnitESWAdIIFTVJb7UgxVU= [edit]
2021-09-10frr: T1514: refactor restart script and drop duplicated codeChristian Poessinger
2021-09-10Merge pull request #1000 from sever-sever/T3810Christian Poessinger
squid: squidguard: T3810: Fix template for sourcre-group and rule
2021-09-10squidguard: T3810: Set DB directory rigths 755Viacheslav
2021-09-10ethernet: T3802: use only one implementation for get_driver_name()Christian Poessinger
Move the two implementations to get the driver name of a NIC from ethernet.py and ethtool.py to only ethtool.py. (cherry picked from commit 07840977834816b69fa3b366817d90f44b5dc7a7)
2021-09-09wireguard: T3642: improve "set" commands for generated key-pairsChristian Poessinger
2021-09-09pki: T3642: use f'ormated strings in print()Christian Poessinger
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 10:16:54 +0000