summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2020-06-26ifconfig: T2653: add common vyos.configverify helpersChristian Poessinger
While moving towards a general interface abstraction based on get_config_dict() and the use of vyos.ifconfig.Interfaces().update() it also makes sense, to split out common verification code to a common util file - instead of duplicating the code, which is infact one of the main forces drivind this transition. vyos.configverify will hold common functions called via verify() from our src/conf_mode scripts so we do not need to copy/paste general verifications methods.
2020-06-26migration: interfaces: T2622: fix pseudo-ethernet migrationChristian Poessinger
By implementation misstake we exited the migrationscript if no VXLAN interface was found but this was wrong as the same loop is used on pseudo-ethernet interfaces. The Migrator previously only worked on pseudo-ethernet when also a VXLAN interface was present. This has been corrected.
2020-06-26ifconfig: T2653: move loopback interface to get_config_dict()Christian Poessinger
2020-06-26ifconfig: T2653: move dummy interface to get_config_dict()Christian Poessinger
This changes the dummy interface implementation to make use of get_config_dict() and also implement a new vyos.ifconfig.Interface().update() function to gather all the scattered calls to update common interface configuration options. Derived classes of Interface() should extend update() to their needs for their special interface type - e.g. bond or bridge.
2020-06-25T2487: add an exception for the case when VRRP stats aren't available.Daniil Baturin
2020-06-24dictconfig: T2637: identify sub-interfaces (vif) to deleteThomas Mangin
2020-06-23ssh: T2635: migrate to get_config_dict()Christian Poessinger
Jinja template contains some workarounds like {% if port is string %}, this depends of the resolution of https://phabricator.vyos.net/T2636
2020-06-23Merge pull request #472 from thomas-mangin/T2633Christian Poessinger
tunnel: T2633: add support for ip (arp) commands
2020-06-23wireguard: T2632: support PSK on multiple peersChristian Poessinger
It was not possible to configure two WG peers with both utilized a pre-shared key. This has been corrected. WG psk can only be read from a file when starting the interface. The code for creating this temporary file has been moved into the ifconfig.WireGuardIf() class. Tested with: ============ set interfaces wireguard wg0 address '192.0.2.0/31' set interfaces wireguard wg0 peer one allowed-ips '0.0.0.0/0' set interfaces wireguard wg0 peer one preshared-key 'e+SIIUcrnrSDHhbTtpjwKhSlSdUALA5ZvoCjfQXcvmA=' set interfaces wireguard wg0 peer one pubkey '/qQGAQ2HfLSZBSCpdgps04r9wRlK7bSFraCH9+MScmw=' set interfaces wireguard wg0 peer two allowed-ips '0.0.0.0/0' set interfaces wireguard wg0 peer two pubkey '/qQGAQ2HfLSZBSCpdgfooor9wRlK7bSFraCH9+MScmw='
2020-06-23tunnel: T2633: add support for ip (arp) commandsThomas Mangin
2020-06-22vpn: sstp: T2008: fix improper use of fail-time dictionary keyChristian Poessinger
2020-06-22vpn: pptp: T2351: fix improper use of fail-time dictionary keyChristian Poessinger
2020-06-22vpn: l2tp: T2264: fix improper use of fail-time dictionary keyChristian Poessinger
2020-06-22pppoe-server: T2314: fix improper use of fail-time dictionary keyChristian Poessinger
2020-06-22Merge branch 'default-dict' of github.com:c-po/vyos-1x into currentChristian Poessinger
* 'default-dict' of github.com:c-po/vyos-1x: console-server: T2588: migrate to defaults from XML interface definitions xml: T2588: add gitignore for generated defaults xml: T2588: code to extract defaults values from xml Debian: remove duplicate build dependency xml: ssh: fix typo in service description
2020-06-22console-server: T2588: migrate to defaults from XML interface definitionsChristian Poessinger
2020-06-22rip: T2547: rewriten implementation in Python and XMLViacheslav Hletenko
2020-06-22Merge pull request #452 from jjakob/T2486-dns-hostsd-fixesDaniil Baturin
T2486: DNS, vyos-hostsd fixes
2020-06-21console: T2624: fix migration script for configured powersave and no consoleChristian Poessinger
When the 'powersave' option under 'system console' was defined but no actual serial console device this cause the following error during migration: Loading configuration from 'config.boot' Traceback (most recent call last): File "/opt/vyatta/etc/config-migrate/migrate/system/16-to-17", line 45, in <module> for device in config.list_nodes(base + ['device']): File "/usr/lib/python3/dist-packages/vyos/configtree.py", line 236, in list_nodes raise ConfigTreeError("Path [{}] doesn't exist".format(path_str)) vyos.configtree.ConfigTreeError: Path [b'system console device'] doesn't exist
2020-06-20op-mode: T2621: fix repeated interface descriptionChristian Poessinger
2020-06-19router-advert: T2618: fix for wrongly converted "autonomous-flag"Christian Poessinger
Boolean nodes have been removed b/c a boolean value makes less sense. The same behavior can be achieved with the presence or absence of a node. Unfortunately the 'autonomous-flag' node has been a negated one which did not migrate it to 'no-autonomous-flag' if it was set to false previously.
2020-06-19dhcpv6-pd: T421: fix unknown lvalue 'StartLimitIntervalSec' warningChristian Poessinger
StartLimitIntervalSec is part of the [Unit] definition and not the [Service] definition [1]. This caused the following warning message: systemd[1]: /lib/systemd/system/dhcp6c@.service:12: Unknown lvalue 'StartLimitIntervalSec' in section 'Service', ignoring This error has been introduced via commit 992d356 ("dhcpv6-pd: T421: workaround for non existing interfaces"). [1]: https://www.freedesktop.org/software/systemd/man/systemd.unit.html
2020-06-19pseudo-ethernet: T2589: fix for deleting interface(s)Christian Poessinger
When deleting a peth interface the interface name was not added to the configuration dict, which lead to referencing non existent keys.
2020-06-19console-server: T2490: server must listen only on localhostChristian Poessinger
2020-06-19console-server: T2490: add SSH support for direct device accessChristian Poessinger
2020-06-18console-server: T2490: rename CLI to console-serverChristian Poessinger
2020-06-18console-server: T2490: add SSH supportChristian Poessinger
A user can define a port under the SSH node per device. WHen connecting to that port and authenticating using regular credentials we will immediately drop to the serial console. This is the same as executing "connect serial-proxy <name>".
2020-06-18console-server: T2490: log to journaldChristian Poessinger
2020-06-18console-server: T2490: move CLI parsing to get_config_dict()Christian Poessinger
For more examples on the new get_config_dict() approach migrate this implementation as it is not yet in production use. Also this serves as proof of concept code for further migrations.
2020-06-18console-server: T2490: replace ser2net with conserverChristian Poessinger
2020-06-18console-server: T2490: add default CLI valuesChristian Poessinger
2020-06-18console-server: T2490: rename CLI to "serial-proxy"Christian Poessinger
2020-06-18console-server: T2490: use new USB ports "by-bus"Christian Poessinger
2020-06-18console-server: T2490: initial supportChristian Poessinger
2020-06-18T2614: add a key mangling option to vyos.config.get_config_dict()Daniil Baturin
2020-06-17router-advert: T2609: remove debug pprint statementChristian Poessinger
2020-06-17router-advert: T2185: migrate from SysVinit to systemdChristian Poessinger
2020-06-17router-advert: T2609: add missing verify() for prefix lifetimeChristian Poessinger
radvd[31898]: AdvValidLifeTime must be greater than AdvPreferredLifetime in radvd.conf, line 19 This happens with the following configuration: vyos@vyos# show service router-advert interface eth0.20 { name-server 2001:4860:4860::8888 prefix ::/64 { valid-lifetime 7200 } } A validator is added to solve this issue and radvd will run again.
2020-06-18T2610: fix default-lifetime typoShohei YOKOKAWA
2020-06-17login: radius: T2299: Implement RADIUS servers priorityDmitriyEshenko
2020-06-16Merge pull request #460 from DmitriyEshenko/1xl2tp16062020Christian Poessinger
l2tp: T2602: Delete excess characters
2020-06-16snmp: T2321: use restart of start in systemctlChristian Poessinger
For an unknown reason snmpd not always starts after reboot.
2020-06-16syslog: T2604: remove unnecessary use of is_tagJohn Estabrook
2020-06-16l2tp: T2602: Delete excess charactersDmitriyEshenko
2020-06-15ifconfig: T2599: sort interface by natural orderThomas Mangin
2020-06-14wireless: T2354: add new validator for phy interfacesChristian Poessinger
2020-06-14console: T2569: bugfix removing entire console CLI treeChristian Poessinger
2020-06-13snmp: T2321: add VRF supportChristian Poessinger
2020-06-13ntp: T2321: add VRF supportChristian Poessinger
2020-06-13ssh: T2321: always run "systemctl daemon-reload"Christian Poessinger