summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2021-01-29ospf: T3267: move "interface ip ospf" configuration to "protocols ospf ↵Christian Poessinger
interface" For easier maintenance and operability move the interface specific protocol setting of OSPF to the OSPF protocol section. This is now also in-line with IS-IS. This means to migrate: ethernet eth0 { vif 202 { ip { ospf { authentication { md5 { key-id 10 { md5-key vyosvyos } } } dead-interval 40 hello-interval 10 priority 1 retransmit-interval 5 transmit-delay 1 } } } } to protocols { ospf { interface eth0.201 { authentication { md5 { key-id 10 { md5-key vyosvyos } } } dead-interval 40 hello-interval 10 priority 1 retransmit-interval 5 transmit-delay 1 } }
2021-01-29rpki: T3266: support deleting entire section from FRR configChristian Poessinger
2021-01-29rpki: T3255: disable debug knobsChristian Poessinger
2021-01-29rpki: T3255: provide full protocol support in XML and PythonChristian Poessinger
This commit provides the implementation of the OSPF CLI with a Jinja2 template that is loaded by FRR reload.
2021-01-27pppoe: T3261: Stop systemd service if pppoe interface disableDmitriyEshenko
2021-01-26op-mode: T3110: Gracefully handle SIGPIPE in show-interfaceserkin
2021-01-25Merge pull request #693 from bstepler/T3240Christian Poessinger
dhcpv6: T3240: support per-interface client DUIDs
2021-01-24ospf(v3): T3236: T3244: adjust to route-map converted name (_ for -)Christian Poessinger
A hyphen in a route-map name will be converted to _, take care about this effect during validation.
2021-01-24ospf(v3): T3236: T3244: add verify() for used route-map existenceChristian Poessinger
2021-01-24ospfv3: T3244: provide full protocol support in XML and PythonChristian Poessinger
This commit provides the implementation of the OSPFv3 (IPv6) CLI with a Jinja2 template that is loaded by FRR reload. It also contains some initial smoketests. There is yet no verify() implementation!
2021-01-24nptv6: T2518: Remove obsolete referencesjack9603301
2021-01-24nptv6: T2515: Modify the field order of ndppdjack9603301
2021-01-24nptv6: T2518: Delete redundant blank linesjack9603301
2021-01-23nptv6: T2518: Remove trailing spacesjack9603301
2021-01-23nptv6: T2518: Remove redundant paths for migration scriptsJACK
2021-01-23nptv6: T2518: Delete the ndppd configuration file when the ndppd service ↵jack9603301
does not need to be enabled
2021-01-23nptv6: T2518: Optimized implementationjack9603301
2021-01-23nptv6: T2518: outbound_interface cannot be any, inbound_interface can be anyjack9603301
2021-01-23nptv6: T2518: Improved template generationjack9603301
2021-01-23nptv6: T2518: Initial support for nat66 (NPT)jack9603301
2021-01-23console-server: T2490: dropbear can restart as long as necessaryChristian Poessinger
Lift the default daemon startup rate-limit when launching the dropbear service used by SSH connections to the console port.
2021-01-23ospf: T3236: provide full protocol support in XML and PythonChristian Poessinger
This commit provides the implementation of the OSPF CLI with a Jinja2 template that is loaded by FRR reload. It also contains some initial smoketests. There is yet no verify() implementation!
2021-01-22dhcpv6: T3240: support per-interface client DUIDsBrandon Stepler
2021-01-22ospf: T3236: support processing by vyos-configdChristian Poessinger
2021-01-22ospf: T3236: add default valuesChristian Poessinger
2021-01-22bgp: T1875: support processing by vyos-configdChristian Poessinger
2021-01-21xml: T3239: override default mtu values and remove workaroundsJohn Estabrook
2021-01-21bgp: T1875: validate() that peer-group specified via listen range existsChristian Poessinger
2021-01-21Merge pull request #690 from Cheeze-It/currentChristian Poessinger
bgp: T1875: Adding BGP listen range FRR feature
2021-01-20bgp: T1875: Adding BGP listen range FRR featureCheeze_It
In this commit we are adding the FRR BGP listen range feature. Specifically it is useful for being able to specify a range in which BGP peers can connect to the local router.
2021-01-20udev: import rule file from vyatta-cfg-systemChristian Poessinger
2021-01-20sysctl: as send_redirects is enabled for all interfaces, also add defaultChristian Poessinger
2021-01-20ospf: add skeleton for new XML/Python based implementationChristian Poessinger
2021-01-19nat: T2947: add many-many translationChristian Poessinger
Support a 1:1 or 1:n prefix translation. The following configuration will NAT source addresses from the 10.2.0.0/16 range to an address from 192.0.2.0/29. For this feature to work a Linux Kernel 5.8 or higher is required! vyos@vyos# show nat source { rule 100 { outbound-interface eth1 source { address 10.2.0.0/16 } translation { address 192.0.2.0/29 } } } This results in the nftables configuration: chain POSTROUTING { type nat hook postrouting priority srcnat; policy accept; oifname "eth1" counter packets 0 bytes 0 snat ip prefix to ip saddr map { 10.2.0.0/16 : 192.0.2.0/29 } comment "SRC-NAT-100" }
2021-01-18bgp: T2174: fix validator for neighbor interface configChristian Poessinger
2021-01-18options: T3231: bugfix ctrl-alt-delete option was not workingChristian Poessinger
Bug introduced in commit 193323ba5d (system: T3078: rename "system options" -> "system option") as the new key used in the dict was not migrated.
2021-01-18options: T1919: beautify with open() for reboot on panicChristian Poessinger
2021-01-18bgp: T2174: print debug output before passing config down to FRRChristian Poessinger
2021-01-17bgp: T2174: add debug optionChristian Poessinger
2021-01-17openvpn: T2994: proper cleanup all files on interface deletionChristian Poessinger
2021-01-17sysctl: T671: import VyOS specific settings from vyatta-cfg-systemChristian Poessinger
2021-01-17ssh: T671: generate rsa, dsa and ed25519 keys on demandChristian Poessinger
2021-01-17ntp: T2185: store configuration in volatile /run areaChristian Poessinger
2021-01-16vrf: T31: add support for - and _ in VRF namesChristian Poessinger
2021-01-16vyos.configdict: node_changed() now accepts key mangling parameterChristian Poessinger
2021-01-16vrf: T31: migrate to get_config_dict()Christian Poessinger
2021-01-16Merge pull request #677 from jack9603301/T3137Christian Poessinger
bridge: T3137: Let VLAN aware bridge approach the behavior of professional equipment
2021-01-16bridge: T3137: Improved verification logicjack9603301
2021-01-15tunnel: T3173: path MTU discovery option should be valuelessChristian Poessinger
2021-01-15Merge branch 'T3173' of https://github.com/sever-sever/vyos-1x into pmtuChristian Poessinger
* 'T3173' of https://github.com/sever-sever/vyos-1x: tunnel: T3173: Add nopmtudisc parameter for tunnels conf-mode