summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2023-12-17Merge pull request #2647 from indrajitr/kea-hook-fixChristian Breunig
dhcp: T3316: Adjust dhcp-run script to align with kea hooks
2023-12-17dhcp: T3316: Adjust dhcp-run script to align with kea hooksIndrajit Raychaudhuri
The hook arguments passed to `on-dhcp-event.sh` have changed in Kea. Adjust the script to align with the new arguments. Additionally, remove FQDN mangling from the script. No need to extract the domain name from `LEASE4_HOSTNAME` only to append it again. See: https://kea.readthedocs.io/en/latest/arm/hooks.html#hooks-run-script
2023-12-17dhcp: T3316: Kea DHCP and DHCPv6 fixessarthurdev
* Move Kea socket permission change on-demand and speed up conf scripts * Fix issue with DHCP reservations when no `ip-address` value
2023-12-16Merge pull request #2617 from indrajitr/ddclient-improvement-round-3-2023-12-11Christian Breunig
ddclient: T5144,T5791: Fix migration to avoid config name conflict
2023-12-15ddclient: T5791: Fix migration to normalize config name and avoid configIndrajit Raychaudhuri
Since `service dns dynamic address <address> service <service> ...` changed to `service dns dynamic name <service> address <address> ...`, the resulting service and address config flip can result in conflicting `service` name. Additionally, since dynamic DNS service name now have name constraint, we need to normalize the service name to conform with the constraint. We now migrate the service name to (service|rfc2136)-<service>-<address> to avoid the conflict and optionally append an index if there is still a name conflict after normalization.
2023-12-15Merge pull request #2639 from c-po/frr-t4020Viacheslav Hletenko
frr: T4020: add option to define number of open file descriptors
2023-12-15frr: T4020: add option to define number of open file descriptorsChristian Breunig
This allows the operator to control the number of open file descriptors each daemon is allowed to start with. The current assumed value on most operating systems is 1024. If the operator plans to run bgp with several thousands of peers then this is where we would modify FRR to allow this to happen. set system frr descriptors <n>
2023-12-14T5823: Add recursive_defaults for BGP get_config dictionaryViacheslav Hletenko
Add recursive_defaults values for BGP "get_config" dictionary.
2023-12-14Merge pull request #2627 from sever-sever/T4163Christian Breunig
T4163: Add BGP Monitoring Protocol BMP feature
2023-12-14Merge pull request #2590 from sever-sever/T5798Christian Breunig
T5798: load-balancing revese-proxy add multiple SSL certificates
2023-12-14T4163: Add BGP Monitoring Protocol BMP featureViacheslav Hletenko
Add BMP feature. BMP (BGP Monitoring Protocol, RFC 7854) is used to send monitoring data from BGP routers to network management entities https://docs.frrouting.org/en/latest/bmp.html Example: set system frr bmp commit run restart bgp set protocols bgp system-as '65001' set protocols bgp neighbor 192.0.2.11 address-family ipv4-unicast set protocols bgp neighbor 192.0.2.11 remote-as '65001' set protocols bgp bmp mirror-buffer-limit '256000000' set protocols bgp bmp target foo address '127.0.0.1' set protocols bgp bmp target foo port '5000' set protocols bgp bmp target foo min-retry '1000' set protocols bgp bmp target foo max-retry '2000' set protocols bgp bmp target foo mirror set protocols bgp bmp target foo monitor ipv4-unicast post-policy set protocols bgp bmp target foo monitor ipv4-unicast pre-policy set protocols bgp bmp target foo monitor ipv6-unicast post-policy set protocols bgp bmp target foo monitor ipv6-unicast pre-policy
2023-12-14image-tools: T5825: restore authentication for add system imageJohn Estabrook
2023-12-14Merge pull request #2624 from jestabro/vrf-aware-add-imageChristian Breunig
image-tools: T5821: restore vrf-aware add system image
2023-12-13image-tools: T5821: restore vrf-aware add system imageJohn Estabrook
2023-12-13Merge pull request #2621 from jestabro/clear-raid-on-installJohn Estabrook
image-tools: T5806: clear previous raid configs on install
2023-12-13ddclient: T5144: Fix migration to avoid config name conflictIndrajit Raychaudhuri
When migrating from `service dns dynamic interface <interface> ...` to `service dns dynamic address <address> ...`, the config name can potentially have a conflict when `address == 'web'`. Although the `/run/ddclient/ddclient.conf` that was generated earlier was incorrect, one could still potentially have misconfigured VyOS config without realizing it. We now append the old <interface> name to the config name to avoid conflict.
2023-12-13image-tools: T5806: deactive raid arraysJohn Estabrook
2023-12-13Merge pull request #2606 from c-po/srv6Christian Breunig
SRv6: T591: initial implementation to support locator definition
2023-12-13Merge pull request #2607 from indrajitr/ddclient-improvement-round-3-2023-12-10Christian Breunig
ddclient: T5791: Adjust warning messages, minor refactor and smoketest updates
2023-12-13Merge pull request #2622 from jestabro/obscure-passwd-on-installChristian Breunig
image-tools: T5819: do not echo password on image install
2023-12-13Merge pull request #2623 from sarthurdev/kea_opmode_fixChristian Breunig
dhcp: T3316: Fix raw op-mode lease output
2023-12-13Merge pull request #2618 from Trae32566/T5816Christian Breunig
validator: T5816: large community validator should only allos character set and basic format
2023-12-13validator: T5816: large community validator should only allos character set ↵Trae Santiago
and basic format
2023-12-12dhcp: T3316: Fix dhcp op-mode state 'all' matchingsarthurdev
2023-12-12dhcp: T3316: Fix raw op-mode lease outputsarthurdev
2023-12-12Merge pull request #2611 from nicolas-fort/T5804-mig-scriptDaniil Baturin
T5804: nat: remove inbound|outbound interface from old configuration when it was set to <any>.
2023-12-12image-tools: T5819: do not echo password on image installJohn Estabrook
2023-12-11ddclient: T5791: Adjust the warning messages and minor refactoringIndrajit Raychaudhuri
2023-12-11srv6: T591: initial implementation to support locator definitionChristian Breunig
VyOS CLI set protocols segment-routing srv6 locator bar prefix '2001:b::/64' set protocols segment-routing srv6 locator foo behavior-usid set protocols segment-routing srv6 locator foo prefix '2001:a::/64' Will generate in FRR segment-routing srv6 locators locator bar prefix 2001:b::/64 block-len 40 node-len 24 func-bits 16 exit ! locator foo prefix 2001:a::/64 block-len 40 node-len 24 func-bits 16 behavior usid exit ! exit ! exit ! exit
2023-12-11bgp: T591: add SRv6 support from FRRChristian Breunig
set protocols bgp sid vpn per-vrf export '99' set protocols bgp srv6 locator 'foo' set protocols bgp system-as '100' Will generate in FRR config router bgp 100 no bgp ebgp-requires-policy no bgp default ipv4-unicast no bgp network import-check ! segment-routing srv6 locator foo exit sid vpn per-vrf export 99 exit
2023-12-11T5807: fix op-mode command <show nat66>, which only display rules if nat was ↵Nicolas Fort
configured. In this commit, check is fixed and rules are printed as expected.
2023-12-11T5804: nat: remove inbound|outbound interface from old configuration when it ↵Nicolas Fort
was set to <any>.
2023-12-10Merge pull request #2601 from c-po/t5413-current-resequenceChristian Breunig
migration: T5413: re-sequence interfaces migration scripts
2023-12-10T5791: DNS dynamic exclude check for dynamic interfaces PPPoEViacheslav Hletenko
Dynamic interfaces such as PPPoE/sstpc can not exist during verification dns dynamic. As they added and removed dynamically. Add interface_filter to exclude them from checks
2023-12-10migration: T5413: re-sequence interfaces migration scriptsChristian Breunig
PR https://github.com/vyos/vyos-1x/pull/2540 backported a migration script from current to the equuleus LTS branch. As migration scripts are executed in order to adjust the CLI for necessary improvements in future LTS releases we need to change the versioning of the migration files to match the new "base" version from the previous LTS release. In theory this could break very ancient 1.4 rolling releases (from the early days of the OSPF refactoring) - but those versions are considered very much unstable. Now this is the last chance to sync up the migration scripts before the 1.4 LTS release.
2023-12-09Merge pull request #1960 from sarthurdev/keaChristian Breunig
dhcp: T3316: Migrate dhcp/dhcpv6 server to Kea
2023-12-08Merge pull request #2584 from c-po/T4943-google-authenticatorChristian Breunig
login: T4943: use pam-auth-update to enable/disable Google authenticator
2023-12-08T5798: load-balancing revese-proxy add multiple SSL certificatesViacheslav Hletenko
Add ability to configure multiple SSL certificates for frontend/service set load-balancing reverse-proxy service web mode http set load-balancing reverse-proxy service web port 443 set load-balancing reverse-proxy service web ssl certificate cert1 set load-balancing reverse-proxy service web ssl certificate cert2
2023-12-08login: T4943: use pam-auth-update to enable/disable Google authenticatorChristian Breunig
The initial version always enabled Google authenticator (2FA/MFA) support by hardcoding the PAM module for sshd and login. This change only enables the PAM module on demand if any use has 2FA/MFA configured. Enabling the module is done system wide via pam-auth-update by using a predefined template. Can be tested using: set system login user vyos authentication plaintext-password vyos set system login user vyos authentication otp key 'QY735IG5HDHBFHS5W7Y2A4EM274SMT3O' See https://docs.vyos.io/en/latest/configuration/system/login.html for additional details.
2023-12-07wireguard: T5413: fix missing check to migration script raising errorJohn Estabrook
2023-12-08dhcp: T3316: Migrate dhcp/dhcpv6 server to Keasarthurdev
2023-12-07Merge pull request #2551 from nicolas-fort/T5778Daniil Baturin
T5778: dhcp server: fix op-mode command
2023-12-07Merge pull request #2539 from nicolas-fort/T5775Daniil Baturin
T5775: firewall: re-add state-policy to firewall. These commands are …
2023-12-07image-tools: T5758: restore saving previous data on installJohn Estabrook
Restore scanning previous installations for config data and ssh host keys on install.
2023-12-06T160: Rebase and fixes for NAT64Viacheslav Hletenko
- Update the base (rebase) - Move include/nat64-protocol.xml.i => include/nat64/protocol.xml.i - Delete unwanted `write_json`, use `write_file` instead - Remove unnecessary deleting of default values for tagNodes T2665 - Add smoketest Example: ``` set interfaces ethernet eth0 address '192.168.122.14/24' set interfaces ethernet eth0 address '192.168.122.10/24' set interfaces ethernet eth2 address '2001:db8::1/64' set nat64 source rule 100 source prefix '64:ff9b::/96' set nat64 source rule 100 translation pool 10 address '192.168.122.10' set nat64 source rule 100 translation pool 10 port '1-65535' ```
2023-12-06nat64: T160: Implement Jool-based NAT64 translatorJoe Groocock
Signed-off-by: Joe Groocock <me@frebib.net>
2023-12-05Merge pull request #2574 from nicolas-fort/T5779Daniil Baturin
T5779: conntrack: Apply fixes to <set system conntrack timeout custom>
2023-12-05accel-ppp: T5688: Fixed migration script for pppoe-serveraapostoliuk
Fixed migration script for pppoe-server
2023-12-05T5779: conntrack: Apply fixes to <set system conntrack timeout custom>. ↵Nicolas Fort
Remove what was not working on 1.3, migrate what was working to new syntax and extend feature for ipv6.
2023-12-04Merge pull request #2501 from aapostoliuk/T5688-currentChristian Breunig
accel-ppp: T5688: Standardized pool configuration in accel-ppp