summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2023-12-24snmp: 5856: fix service removal errorChristian Breunig
When deleting SNMP from CLI the 'delete' key was not honored in the config dictionary, leading to a false process startup causing the following error: Job for snmpd.service failed because the control process exited with error code. See "systemctl status snmpd.service" and "journalctl -xeu snmpd.service" for details.
2023-12-22T5840: Add override for systemd kea-ctrl-agent.serviceViacheslav Hletenko
After update KEA to 2.4.x in the bf04cd8fea44d375fb7d93d75a1f31c220730c88 there is a file that expects ConditionFileNotEmpty=/etc/kea/kea-api-password It cause the unit `kea-ctrl-agent.service` cannot start systemd[1]: kea-ctrl-agent.service - Kea Control Agent was skipped because of an unmet condition check (ConditionFileNotEmpty=/etc/kea/kea-api-password) Override systemd kea-ctrl-agent.service do not check this file
2023-12-21T5781: use dynamic minisign key listKyleM
Updated image_installer.py to try and validate image with all minisign public keys in /usr/share/vyos/keys/
2023-12-21Merge pull request #2663 from c-po/srv6-part2Christian Breunig
srv6: T591: enable SR enabled packet processing on defined interfaces
2023-12-21Merge pull request #2665 from c-po/ndp-proxyChristian Breunig
T2898: add ndp-proxy service
2023-12-21dhcp: T5846: Refactor and simplify DUID definitionIndrajit Raychaudhuri
Refactor DUID XML definition in conf-mode to be reusable. Additionally, remove explicit call to a separate validator `ipv6-duid` and inline the regex into the XML definition.
2023-12-20T2898: add ndp-proxy serviceChristian Breunig
VyOS CLI command set service ndp-proxy interface eth0 prefix 2001:db8::/64 mode 'static' Will generate the following NDP proxy configuration $ cat /run/ndppd/ndppd.conf # autogenerated by service_ndp-proxy.py # This tells 'ndppd' how often to reload the route file /proc/net/ipv6_route route-ttl 30000 # This sets up a listener, that will listen for any Neighbor Solicitation # messages, and respond to them according to a set of rules proxy eth0 { # Turn on or off the router flag for Neighbor Advertisements router no # Control how long to wait for a Neighbor Advertisment message before invalidating the entry (milliseconds) timeout 500 # Control how long a valid or invalid entry remains in the cache (milliseconds) ttl 30000 # This is a rule that the target address is to match against. If no netmask # is provided, /128 is assumed. You may have several rule sections, and the # addresses may or may not overlap. rule 2001:db8::/64 { static } }
2023-12-20srv6: T591: enable SR enabled packet processing on defined interfacesChristian Breunig
The Linux Kernel needs to be told if IPv6 SR enabled packets whether should be processed or not. This is done using /proc/sys/net/conf/<iface>/seg6_* variables: seg6_enabled - BOOL Accept or drop SR-enabled IPv6 packets on this interface. Relevant packets are those with SRH present and DA = local. 0 - disabled (default) not 0 - enabled Or the VyOS CLI command: * set protocols segment-routing interface eth0 srv6
2023-12-20vrf: T591: define sysctl setting for net.vrf.strict_modeChristian Breunig
Enable/Disable VRF strict mode, when net.vrf.strict_mode=0 (default) it is possible to associate multiple VRF devices to the same table. Conversely, when net.vrf.strict_mode=1 a table can be associated to a single VRF device. A VRF table can be used by the VyOS CLI only once (ensured by verify()), this simply adds an additional Kernel safety net, but a requirement for IPv6 segment routing headers.
2023-12-20https api: T5844: allow the server to start without API keysDaniil Baturin
and use only PAM auth and JWT
2023-12-20https api: T5844: issue a warning about the classic API unavailabilityDaniil Baturin
when no API keys are set
2023-12-17Merge pull request #2647 from indrajitr/kea-hook-fixChristian Breunig
dhcp: T3316: Adjust dhcp-run script to align with kea hooks
2023-12-17dhcp: T3316: Adjust dhcp-run script to align with kea hooksIndrajit Raychaudhuri
The hook arguments passed to `on-dhcp-event.sh` have changed in Kea. Adjust the script to align with the new arguments. Additionally, remove FQDN mangling from the script. No need to extract the domain name from `LEASE4_HOSTNAME` only to append it again. See: https://kea.readthedocs.io/en/latest/arm/hooks.html#hooks-run-script
2023-12-17dhcp: T3316: Kea DHCP and DHCPv6 fixessarthurdev
* Move Kea socket permission change on-demand and speed up conf scripts * Fix issue with DHCP reservations when no `ip-address` value
2023-12-16Merge pull request #2617 from indrajitr/ddclient-improvement-round-3-2023-12-11Christian Breunig
ddclient: T5144,T5791: Fix migration to avoid config name conflict
2023-12-15ddclient: T5791: Fix migration to normalize config name and avoid configIndrajit Raychaudhuri
Since `service dns dynamic address <address> service <service> ...` changed to `service dns dynamic name <service> address <address> ...`, the resulting service and address config flip can result in conflicting `service` name. Additionally, since dynamic DNS service name now have name constraint, we need to normalize the service name to conform with the constraint. We now migrate the service name to (service|rfc2136)-<service>-<address> to avoid the conflict and optionally append an index if there is still a name conflict after normalization.
2023-12-15Merge pull request #2639 from c-po/frr-t4020Viacheslav Hletenko
frr: T4020: add option to define number of open file descriptors
2023-12-15frr: T4020: add option to define number of open file descriptorsChristian Breunig
This allows the operator to control the number of open file descriptors each daemon is allowed to start with. The current assumed value on most operating systems is 1024. If the operator plans to run bgp with several thousands of peers then this is where we would modify FRR to allow this to happen. set system frr descriptors <n>
2023-12-14T5823: Add recursive_defaults for BGP get_config dictionaryViacheslav Hletenko
Add recursive_defaults values for BGP "get_config" dictionary.
2023-12-14Merge pull request #2627 from sever-sever/T4163Christian Breunig
T4163: Add BGP Monitoring Protocol BMP feature
2023-12-14Merge pull request #2590 from sever-sever/T5798Christian Breunig
T5798: load-balancing revese-proxy add multiple SSL certificates
2023-12-14T4163: Add BGP Monitoring Protocol BMP featureViacheslav Hletenko
Add BMP feature. BMP (BGP Monitoring Protocol, RFC 7854) is used to send monitoring data from BGP routers to network management entities https://docs.frrouting.org/en/latest/bmp.html Example: set system frr bmp commit run restart bgp set protocols bgp system-as '65001' set protocols bgp neighbor 192.0.2.11 address-family ipv4-unicast set protocols bgp neighbor 192.0.2.11 remote-as '65001' set protocols bgp bmp mirror-buffer-limit '256000000' set protocols bgp bmp target foo address '127.0.0.1' set protocols bgp bmp target foo port '5000' set protocols bgp bmp target foo min-retry '1000' set protocols bgp bmp target foo max-retry '2000' set protocols bgp bmp target foo mirror set protocols bgp bmp target foo monitor ipv4-unicast post-policy set protocols bgp bmp target foo monitor ipv4-unicast pre-policy set protocols bgp bmp target foo monitor ipv6-unicast post-policy set protocols bgp bmp target foo monitor ipv6-unicast pre-policy
2023-12-14image-tools: T5825: restore authentication for add system imageJohn Estabrook
2023-12-14Merge pull request #2624 from jestabro/vrf-aware-add-imageChristian Breunig
image-tools: T5821: restore vrf-aware add system image
2023-12-13image-tools: T5821: restore vrf-aware add system imageJohn Estabrook
2023-12-13Merge pull request #2621 from jestabro/clear-raid-on-installJohn Estabrook
image-tools: T5806: clear previous raid configs on install
2023-12-13ddclient: T5144: Fix migration to avoid config name conflictIndrajit Raychaudhuri
When migrating from `service dns dynamic interface <interface> ...` to `service dns dynamic address <address> ...`, the config name can potentially have a conflict when `address == 'web'`. Although the `/run/ddclient/ddclient.conf` that was generated earlier was incorrect, one could still potentially have misconfigured VyOS config without realizing it. We now append the old <interface> name to the config name to avoid conflict.
2023-12-13image-tools: T5806: deactive raid arraysJohn Estabrook
2023-12-13Merge pull request #2606 from c-po/srv6Christian Breunig
SRv6: T591: initial implementation to support locator definition
2023-12-13Merge pull request #2607 from indrajitr/ddclient-improvement-round-3-2023-12-10Christian Breunig
ddclient: T5791: Adjust warning messages, minor refactor and smoketest updates
2023-12-13Merge pull request #2622 from jestabro/obscure-passwd-on-installChristian Breunig
image-tools: T5819: do not echo password on image install
2023-12-13Merge pull request #2623 from sarthurdev/kea_opmode_fixChristian Breunig
dhcp: T3316: Fix raw op-mode lease output
2023-12-13Merge pull request #2618 from Trae32566/T5816Christian Breunig
validator: T5816: large community validator should only allos character set and basic format
2023-12-13validator: T5816: large community validator should only allos character set ↵Trae Santiago
and basic format
2023-12-12dhcp: T3316: Fix dhcp op-mode state 'all' matchingsarthurdev
2023-12-12dhcp: T3316: Fix raw op-mode lease outputsarthurdev
2023-12-12Merge pull request #2611 from nicolas-fort/T5804-mig-scriptDaniil Baturin
T5804: nat: remove inbound|outbound interface from old configuration when it was set to <any>.
2023-12-12image-tools: T5819: do not echo password on image installJohn Estabrook
2023-12-11ddclient: T5791: Adjust the warning messages and minor refactoringIndrajit Raychaudhuri
2023-12-11srv6: T591: initial implementation to support locator definitionChristian Breunig
VyOS CLI set protocols segment-routing srv6 locator bar prefix '2001:b::/64' set protocols segment-routing srv6 locator foo behavior-usid set protocols segment-routing srv6 locator foo prefix '2001:a::/64' Will generate in FRR segment-routing srv6 locators locator bar prefix 2001:b::/64 block-len 40 node-len 24 func-bits 16 exit ! locator foo prefix 2001:a::/64 block-len 40 node-len 24 func-bits 16 behavior usid exit ! exit ! exit ! exit
2023-12-11bgp: T591: add SRv6 support from FRRChristian Breunig
set protocols bgp sid vpn per-vrf export '99' set protocols bgp srv6 locator 'foo' set protocols bgp system-as '100' Will generate in FRR config router bgp 100 no bgp ebgp-requires-policy no bgp default ipv4-unicast no bgp network import-check ! segment-routing srv6 locator foo exit sid vpn per-vrf export 99 exit
2023-12-11T5807: fix op-mode command <show nat66>, which only display rules if nat was ↵Nicolas Fort
configured. In this commit, check is fixed and rules are printed as expected.
2023-12-11T5804: nat: remove inbound|outbound interface from old configuration when it ↵Nicolas Fort
was set to <any>.
2023-12-10Merge pull request #2601 from c-po/t5413-current-resequenceChristian Breunig
migration: T5413: re-sequence interfaces migration scripts
2023-12-10T5791: DNS dynamic exclude check for dynamic interfaces PPPoEViacheslav Hletenko
Dynamic interfaces such as PPPoE/sstpc can not exist during verification dns dynamic. As they added and removed dynamically. Add interface_filter to exclude them from checks
2023-12-10migration: T5413: re-sequence interfaces migration scriptsChristian Breunig
PR https://github.com/vyos/vyos-1x/pull/2540 backported a migration script from current to the equuleus LTS branch. As migration scripts are executed in order to adjust the CLI for necessary improvements in future LTS releases we need to change the versioning of the migration files to match the new "base" version from the previous LTS release. In theory this could break very ancient 1.4 rolling releases (from the early days of the OSPF refactoring) - but those versions are considered very much unstable. Now this is the last chance to sync up the migration scripts before the 1.4 LTS release.
2023-12-09Merge pull request #1960 from sarthurdev/keaChristian Breunig
dhcp: T3316: Migrate dhcp/dhcpv6 server to Kea
2023-12-08Merge pull request #2584 from c-po/T4943-google-authenticatorChristian Breunig
login: T4943: use pam-auth-update to enable/disable Google authenticator
2023-12-08T5798: load-balancing revese-proxy add multiple SSL certificatesViacheslav Hletenko
Add ability to configure multiple SSL certificates for frontend/service set load-balancing reverse-proxy service web mode http set load-balancing reverse-proxy service web port 443 set load-balancing reverse-proxy service web ssl certificate cert1 set load-balancing reverse-proxy service web ssl certificate cert2
2023-12-08login: T4943: use pam-auth-update to enable/disable Google authenticatorChristian Breunig
The initial version always enabled Google authenticator (2FA/MFA) support by hardcoding the PAM module for sshd and login. This change only enables the PAM module on demand if any use has 2FA/MFA configured. Enabling the module is done system wide via pam-auth-update by using a predefined template. Can be tested using: set system login user vyos authentication plaintext-password vyos set system login user vyos authentication otp key 'QY735IG5HDHBFHS5W7Y2A4EM274SMT3O' See https://docs.vyos.io/en/latest/configuration/system/login.html for additional details.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 06:32:37 +0000