summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2023-12-07Merge pull request #2539 from nicolas-fort/T5775Daniil Baturin
T5775: firewall: re-add state-policy to firewall. These commands are …
2023-12-07image-tools: T5758: restore saving previous data on installJohn Estabrook
Restore scanning previous installations for config data and ssh host keys on install.
2023-12-06T160: Rebase and fixes for NAT64Viacheslav Hletenko
- Update the base (rebase) - Move include/nat64-protocol.xml.i => include/nat64/protocol.xml.i - Delete unwanted `write_json`, use `write_file` instead - Remove unnecessary deleting of default values for tagNodes T2665 - Add smoketest Example: ``` set interfaces ethernet eth0 address '192.168.122.14/24' set interfaces ethernet eth0 address '192.168.122.10/24' set interfaces ethernet eth2 address '2001:db8::1/64' set nat64 source rule 100 source prefix '64:ff9b::/96' set nat64 source rule 100 translation pool 10 address '192.168.122.10' set nat64 source rule 100 translation pool 10 port '1-65535' ```
2023-12-06nat64: T160: Implement Jool-based NAT64 translatorJoe Groocock
Signed-off-by: Joe Groocock <me@frebib.net>
2023-12-05Merge pull request #2574 from nicolas-fort/T5779Daniil Baturin
T5779: conntrack: Apply fixes to <set system conntrack timeout custom>
2023-12-05accel-ppp: T5688: Fixed migration script for pppoe-serveraapostoliuk
Fixed migration script for pppoe-server
2023-12-05T5779: conntrack: Apply fixes to <set system conntrack timeout custom>. ↵Nicolas Fort
Remove what was not working on 1.3, migrate what was working to new syntax and extend feature for ipv6.
2023-12-04Merge pull request #2501 from aapostoliuk/T5688-currentChristian Breunig
accel-ppp: T5688: Standardized pool configuration in accel-ppp
2023-12-04accel-ppp: T5688: Standardized pool configuration in accel-pppaapostoliuk
Standardized pool configuration for all accel-ppp services. 1. Only named pools are used now. 2. Allows all services to use range in x.x.x.x/mask and x.x.x.x-x.x.x.y format 3. next-pool can be used in all services 2. Allows to use in ipoe gw-ip-address without pool configuration which allows to use Fraimed-IP-Address attribute by radius. 3. Default pool name should be explicidly configured with default-pool. 4. In ipoe netmask and range subnet can be different.
2023-12-04Merge pull request #2569 from indrajitr/ddclient-update-20231203-04Christian Breunig
ddclient: T5791: Simplify and fix migration script for dynamic dns
2023-12-03ddclient: T5791: Simplify and fix migration script for dynamic dnsIndrajit Raychaudhuri
Mark 'dns dynamic name' as tag node to avoid unexpected nesting.
2023-12-03Merge pull request #2566 from c-po/t5769-vtiChristian Breunig
vti: T5769: restore interface settings on down -> up event
2023-12-03ddclient: T5791: Fix file permission for migration scriptIndrajit Raychaudhuri
2023-12-02vti: T5769: restore interface settings on down -> up eventChristian Breunig
On VTI interface link down the link-local IPv6 address is removed. As soon as the IPSec tunnel is online again, vti-up-down helper is called which only places the interface in up state using iproute2 command sudo ip link set vti0 up This does not restore the IPv6 LL address. Instead use vyos.ifconfig to properly re-initialize the VTI interface using the generic update() method.
2023-11-30ddclient: T5791: Migration script for dynamic dns config path changeIndrajit Raychaudhuri
2023-11-30ddclient: T5791: Update dynamic dns configuration pathIndrajit Raychaudhuri
Modify the configuration path to be consistent with the usual dialects of VyoS configuration (wireguard, dns, firewall, etc.) This would also shorten the configuration path and have a unified treatment for RFC2136-based updates and other 'web-service' based updates. While at it, add support for per-service web-options. This would allow for probing different external URLs on a per-service basis.
2023-11-29image-tools: T5789: copy ssh host keys on image updateJohn Estabrook
2023-11-28Merge pull request #2542 from jestabro/single-owner-https-configJohn Estabrook
http-api: T5782: use single config-mode script for https and http-api
2023-11-28T5575: Update migration scripts for state policy parsingNicolas Fort
2023-11-27image-tools: T5751: restore arg raise_error for non-interactive useJohn Estabrook
2023-11-27image-tools: T5751: add arg no_prompt for non-interactive callsJohn Estabrook
2023-11-27image-tools: T5751: normalize args using hyphen instead of underscoreJohn Estabrook
2023-11-26http-api: T5782: use single config-mode script for https and http-apiJohn Estabrook
2023-11-26image-tools: T4516: exit grub-update service if running in dockerJohn Estabrook
2023-11-22http-api: T5768: remove auxiliary http-api.confJohn Estabrook
2023-11-22Merge pull request #2522 from dmbaturin/require-api-keysChristian Breunig
https api: T5772: check if keys are configured unless PAM auth is enabled for GraphQL
2023-11-22Merge pull request #2528 from nicolas-fort/T5637-Extend-bridgeChristian Breunig
T5637: firewall: extend rule for default-action to firewall bridge
2023-11-22Merge pull request #2527 from c-po/t5630-mru-part-2Christian Breunig
pppoe: T5630: make MRU default to MTU if unspecified
2023-11-22T5637: firewall: extend rule for default-action to firewall bridge, in order ↵Nicolas Fort
to be able to catch logs using separte rule for default-action
2023-11-22pppoe: T5630: make MRU default to MTU if unspecifiedChristian Breunig
This fixes the implementation in e062a8c11 ("pppoe: T5630: allow to specify MRU in addition to already configurable MTU") and restores the bahavior that MRU defaults to MTU if MRU is not explicitly set. This was the behavior in VyOS 1.3.3 and below before we added ability to define the MRU value.
2023-11-22vxlan: T5759: change default MTU from 1450 -> 1500 bytesChristian Breunig
Found an odd behavior on Linux and the VyOS CLI implementation. If adding VXLAN interfaces using iproute2 the MTU differs depending on the creation syntax: ip -4 link add vxlan100 type vxlan dstport 4789 external df unset tos inherit \ ttl 16 nolearning vnifilter local 172.16.33.201 ip -4 link add vxlan200 type vxlan id 200 dstport 4789 local 172.16.33.201 dev eth0 ip -6 link add vxlan300 type vxlan id 300 dstport 4789 local 2001:db8:1::1 dev eth0 132: vxlan300: <BROADCAST,MULTICAST> mtu 1430 qdisc noop state DOWN group default qlen 1000 link/ether 4e:fb:e3:f5:d9:59 brd ff:ff:ff:ff:ff:ff 133: vxlan200: <BROADCAST,MULTICAST> mtu 1450 qdisc noop state DOWN group default qlen 1000 link/ether 0e:4e:f4:76:59:3f brd ff:ff:ff:ff:ff:ff 134: vxlan100: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether ba:b6:b7:0c:b1:37 brd ff:ff:ff:ff:ff:ff VyOS always sets a default MTU of 1450 bytes which is correct for IPv4 p2p links or multicast, but invalid for IPv6 p2p. Also this will break EVPN deployments as ethernet bridges with MTU < 1500 bytes are less fun. Increase default MTU to 1500 bytes. Migrate old configurations to use 1450 bytes if not specified otherwise on the CLI.
2023-11-22Merge pull request #2499 from c-po/t5753-vxlan-vnifilterChristian Breunig
vxlan: T5753: add support for VNI filtering
2023-11-21Merge pull request #2519 from c-po/t5762-vhost-portJohn Estabrook
http: T5762: rename "virtual-host listen-port" -> "virtual-host port"
2023-11-22https api: T5772: check if keys are configuredDaniil Baturin
unless PAM auth is enabled for GraphQL
2023-11-21http: T5762: rename "virtual-host listen-port" -> "virtual-host port"Christian Breunig
This complements commit f5e43b136 ("http: T5762: api: make API socket backend communication the one and only default") so we have a consistent port CLI node across VyOS components.
2023-11-21T5767: HTTPS API add reboot and poweroff endpointsViacheslav Hletenko
Add ability to reboot and poweroff the system via API curl -k --location --request POST 'https://vyos/reboot' \ --form data='{"op": "reboot", "path": ["now"]}' \ --form key='apikey' curl -k --location --request POST 'https://vyos/poweroff' \ --form data='{"op": "poweroff", "path": ["now"]}' \ --form key='apikey'
2023-11-20Merge pull request #2508 from c-po/t5762-https-api-socketDaniil Baturin
http: T5762: api: make API socket backend communication the one and only default
2023-11-20T5763: fix imprecise check for remote file nameJohn Estabrook
2023-11-20http: T5762: api: make API socket backend communication the one and only defaultChristian Breunig
Why: Smoketests fail as they can not establish IPv6 connection to uvicorn backend server. https://github.com/vyos/vyos-1x/pull/2481 added a bunch of new smoketests. While debugging those failing, it was uncovered, that uvicorn only listens on IPv4 connections vyos@vyos# netstat -tulnp | grep 8080 (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN - As the CLI already has an option to move the API communication from an IP to a UNIX domain socket, the best idea is to make this the default way of communication, as we never directly talk to the API server but rather use the NGINX reverse proxy.
2023-11-18vxlan: T5753: add support for VNI filteringChristian Breunig
In a service provider network a service provider typically supports multiple bridge domains with overlapping vlans. One bridge domain per customer. Vlans in each bridge domain are mapped to globally unique VXLAN VNI ranges assigned to each customer. Without the ability of VNI filtering, we can not provide VXLAN tunnels with multiple tenants all requiring e.g. VLAN 10. To Test: set interfaces vxlan vxlan987 parameters external set interfaces vxlan vxlan987 source-interface eth0 set interfaces vxlan vxlan987 parameters vni-filter set interfaces vxlan vxlan987 vlan-to-vni 50 vni 10050 set interfaces vxlan vxlan987 vlan-to-vni 51 vni 10051 set interfaces vxlan vxlan987 vlan-to-vni 52 vni 10052 set interfaces vxlan vxlan987 vlan-to-vni 53 vni 10053 set interfaces vxlan vxlan987 vlan-to-vni 54 vni 10054 set interfaces vxlan vxlan987 vlan-to-vni 60 vni 10060 set interfaces vxlan vxlan987 vlan-to-vni 69 vni 10069 set interfaces bridge br0 member interface vxlan987 Add new op-mode command: show bridge vni Interface VNI ----------- ----------- vxlan987 10050-10054 vxlan987 10060 vxlan987 10069
2023-11-18Merge pull request #2500 from sever-sever/T5749Christian Breunig
T5749: Swap show interfaces and show interfaces summary
2023-11-17T5749: Swap show interfaces and show interfaces summaryViacheslav Hletenko
By default show VRF, MAC, MTU for `show interfaces` The original `show interfaces` moved to `show interfacces summary`
2023-11-16Merge pull request #1768 from zdc/T4516-sagittaJohn Estabrook
image: T4516: Added system image tools
2023-11-16image: T4516: add raid-1 install supportJohn Estabrook
2023-11-16image: T4516: ensure compatibility with legacy RAID 1 installsJohn Estabrook
2023-11-16image: T4516: variable name spellingJohn Estabrook
2023-11-16image: T4516: restore select entry to set/delete imageJohn Estabrook
2023-11-16image: T4516: do not prompt for confirmation when setting defaultJohn Estabrook
2023-11-16image: T4516: reword some messages and promptsJohn Estabrook
2023-11-16image: T4516: add clearer error msg on attempt to upgrade to 1.2.xJohn Estabrook
An attempt to upgrade to 1.2.x is caught, but error is of failed checksum verification; add check and message.