summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2022-09-29firewall: T2199: Fix op-mode script for interface migration and vyos_filter ↵sarthurdev
table name
2022-09-28Merge pull request #1561 from sever-sever/T4715Christian Poessinger
login: T4715: Auto logout user after inactivity
2022-09-28login: T4715: Auto logout user after inactivityViacheslav Hletenko
Ability to terminate interactive sessions (TTY/PTS) after a period of inactivity. set system login timeout '300'
2022-09-28nat: T4713: Fix op-mode nat translation outputsarthurdev
2022-09-28conserver: T4717: Support for setting a name for console-server devicesWilliam Hughes
This adds a new 'alias' property to the console-server device definition to allow users to connect to a console using a human-readable name rather than just the device name. For a configuration like: service { console-server { device ttyUSB0 { speed 115200 alias my-server } } } Users can connect either by doing `connect console ttyUSB0`, or `connect console my-server`. Names: * Must be unique * Are limited to 128 characters * Are optional - if not specified, only the `connect console ttyX` form can be used
2022-09-26ethernet: T4689: support asymetric RFS configuration on multiple interfacesChristian Poessinger
The initial implementation from commit ac4e07f9 ("rfs: T4689: Support RFS (Receive Flow Steering)") always adjusted the global rps_sock_flow_entries configuration. So if RFS was enabled for one NIC but not the other - it did not work. According to the documentation: RFS is only available if the kconfig symbol CONFIG_RPS is enabled (on by default for SMP). The functionality remains disabled until explicitly configured. The number of entries in the global flow table is set through: /proc/sys/net/core/rps_sock_flow_entries The number of entries in the per-queue flow table are set through: /sys/class/net/<dev>/queues/rx-<n>/rps_flow_cnt Both of these need to be set before RFS is enabled for a receive queue. Values for both are rounded up to the nearest power of two. The suggested flow count depends on the expected number of active connections at any given time, which may be significantly less than the number of open connections. We have found that a value of 32768 for rps_sock_flow_entries works fairly well on a moderately loaded server. This commit sets rps_sock_flow_entries via sysctl on bootup leafing the RFS configuration to the interface level.
2022-09-26Merge pull request #1545 from sever-sever/T4557Christian Poessinger
ids: T4557: Migrate threshold and add new threshold types
2022-09-26ids: T4557: Migrate threshold and add new threshold typesViacheslav Hletenko
Migrate "service ids ddos-protection threshold xxx" to "service ids ddos-protection general threshold xxx" Add new threshold types: set service ids ddos-protection threshold tcp xxx set service ids ddos-protection threshold udp xxx set service ids ddos-protection threshold icmp xxx
2022-09-22ipoe: T4703: fix migration of vlan node for loca authenticated usersChristian Poessinger
2022-09-22Merge pull request #1554 from sarthurdev/nat_refactorChristian Poessinger
nat: T4605: Fix op-mode NAT table name
2022-09-22nat: T4605: Fix op-mode NAT table namesarthurdev
2022-09-22Merge pull request #1521 from sever-sever/T3476Christian Poessinger
update-check: T3476: Allow update-check for VyOS images
2022-09-22Merge pull request #1552 from sarthurdev/nat_refactorChristian Poessinger
nat: nat66: T4605: T4706: Refactor NAT/NAT66 and use new table name
2022-09-21nat: T4605: Refactor static NAT to use python module for parsing rulessarthurdev
* Rename table to vyos_nat * Add static NAT smoketest
2022-09-21nat66: T4605: Refactor NAT66 to use python module for parsing rulessarthurdev
* Rename table to vyos_nat * Refactor tests to use `verify_nftables` format
2022-09-21nat: T4605: Refactor NAT to use python module for parsing rulessarthurdev
* Rename table to vyos_nat * Refactor tests to use `verify_nftables` format
2022-09-21ipoe: T4678: T4703: rewrite to get_config_dict()Christian Poessinger
In addition to the rewrite to make use of get_config_dict() the CLI is slightly adjusted as specified in T4703. * Rename vlan-id and vlan-range to simply vlan * Rename network-mode to simply mode * Re-use existing common Jinja2 template for Accel-PPP which are shared with PPPoE and SSTP server. * Retrieve default values via defaultValue XML node
2022-09-20ipsec: T4118: bugfix migration of IKEv2 road-warrior "id" CLI optionChristian Poessinger
The "authentication id" option for road-warriors did not get migrated to the new local-id CLI node. This has been fixed.
2022-09-19ipsec: T4118: bugfix config migrator 9-to-10Christian Poessinger
When a CLI node is set with a migrator and is not a valueLess node, we need to specify the "value" using the value= operation in config.set(). This fixes the config load error: vyos.configsession.ConfigSessionError: Invalid config file (syntax error): error at line 353
2022-09-18Merge pull request #1543 from Cheeze-It/currentChristian Poessinger
isis: T4693: Fix ISIS segment routing configurations, part deux
2022-09-18Update protocols_isis.pyCheeze_It
isis: T4693: Fix ISIS segment routing configurations This change is to fix more bugs in which ISIS segment routing was broken due to a refactor. This change also introduces a few additions to the ISIS handler for checking per prefix validations for segment value and mutual exclusivity for two options.
2022-09-17Merge pull request #1546 from nicolas-fort/fwall-jumpChristian Poessinger
T4699: Firewall: Add jump action in firewall ruleset
2022-09-17wireguard: T4702: actively revoke peer if it gets disabledChristian Poessinger
When any configured peer is set to `disable` while the Wireguard tunnel is up and running it does not get actively revoked and removed. This poses a security risk as connections keep beeing alive. Whenever any parameter of a peer changes we actively remove the peer and fully recreate it on the fly.
2022-09-17pppoe-server: T4703: combine vlan-id and vlan-range into single CLI nodeChristian Poessinger
The initial Accel-PPP PPPoE implementation used: set service pppoe-server interface <name> vlan-id <id> set service pppoe-server interface <name> vlan-range <start-stop> This is actually a duplicated CLI node.
2022-09-16Merge pull request #1463 from sever-sever/T4118Daniil Baturin
ipsec: T4118: Change vpn ipsec syntax for IKE ESP and peer
2022-09-16T4699: Firewall: Add jump action in firewall rulestNicolas Fort
2022-09-16ipsec: T4118: Change vpn ipsec syntax for IKE ESP and peerViacheslav Hletenko
Migration and Change boolean nodes "enable/disable" to disable-xxxx, enable-xxxx and just xxx for VPN IPsec configurations - IKE changes: - replace 'ipsec ike-group <tag> mobike disable' => 'ipsec ike-group <tag> disable-mobike' - replace 'ipsec ike-group <tag> ikev2-reauth yes|no' => 'ipsec ike-group <tag> ikev2-reauth' - ESP changes: - replace 'ipsec esp-group <tag> compression enable' => 'ipsec esp-group <tag> compression' - PEER changes: - replace: 'peer <tag> id xxx' => 'peer <tag> local-id xxx' - replace: 'peer <tag> force-encapsulation enable' => 'peer <tag> force-udp-encapsulation' - add option: 'peer <tag> remote-address x.x.x.x' Add 'peer <name> remote-address <name>' via migration script
2022-09-16Merge pull request #1544 from sever-sever/T4697Christian Poessinger
policy-route: T4697: Add missing rule_id for verify_rule func
2022-09-16ocserv: T4656: use "0.0.0.0" defaultValue via XML definition"Christian Poessinger
2022-09-16ocserv: openconnect: T4656: add listen-address CLI optionDemon_H
This will set the listen-host ocserv configuration option.
2022-09-16xml: T4698: drop validator name="range" and replace it with numericChristian Poessinger
After T4669 added support for range validation to the OCaml validator there is no need to keep the slow Python validator in place. Raplace all occurances of <validator name="range" argument="--min=1 --max=65535"/> with <validator name="numeric" argument="--range 1-65535"/>.
2022-09-16policy-route: T4697: Add missing rule_id for verify_rule funcViacheslav Hletenko
There is a missing 'rule_id' in verify_rule() function We call it from the loop but don't provide argument 'rule_id' It cause "NameError: name 'rule_id' is not defined" Fix it
2022-09-15Merge pull request #1477 from sempervictus/feature/ocserv_groupsViacheslav Hletenko
T3896(adjacent): Fix ocserv local user requirement, add groupconfig
2022-09-14Merge pull request #1530 from sever-sever/T4679Christian Poessinger
openvpn: T4679: Fix incorrect verify local and remote address
2022-09-14openvpn: T4679: Fix incorrect verify local and remote addressViacheslav Hletenko
In the OpenVPN site-to-site config we can use IPv6 peers without IPv4 configurations but "verify()" checks also local and remote IPv4 addresses that in this case will be empty lists For example: set interfaces openvpn vtun2 local-address 2001:db8::1 set interfaces openvpn vtun2 remote-address 2001:db8::2 Check in the commit (v4loAddr == v4remAddr) <= both empty lists commit DEBUG: [] == [] or ['2001:db8::2'] == [] So we should also check v4loAddr, v4remAddr, v6loAddr, v6remAddr are not empty
2022-09-14Merge pull request #1537 from sarthurdev/nhrp_nftablesChristian Poessinger
nhrp: T2199: Use separate table in nftables for NHRP rules
2022-09-14nhrp: T2199: Use separate table in nftables for NHRP rulessarthurdev
2022-09-14Merge pull request #1534 from sarthurdev/firewall_interfacesChristian Poessinger
firewall: zone-policy: T2199: T4605: Refactor firewall, migrate zone-policy
2022-09-13zone-policy: T2199: Migrate zone-policy to firewall nodesarthurdev
2022-09-13firewall: T4605: Rename filter tables to vyos_filtersarthurdev
2022-09-13firewall: T2199: Move initial firewall tables to datasarthurdev
2022-09-13firewall: T2199: Refactor firewall + zone-policy, move interfaces under ↵sarthurdev
firewall node * Refactor firewall and zone-policy rule creation and cleanup * Migrate interface firewall values to `firewall interfaces <name> <direction> name/ipv6-name <name>` * Remove `firewall-interface.py` conf script
2022-09-12graphql: T4690: update resolver for 'SystemStatus' after 'uptime' updateJohn Estabrook
2022-09-09route: T4684: Set execution flag to op-mode route.pyViacheslav Hletenko
Set execution flag to route.py op-mode
2022-09-09Merge branch 'current' into standardize-show-system-storageChristian Poessinger
2022-09-08system: T4682: standardize op-mode 'show system storage'John Estabrook
2022-09-08system: T4681: convert 'show_uptime.py' script to standardized formatJohn Estabrook
2022-09-07update-check: T3476: Allow update-check for VyOS imagesViacheslav Hletenko
Ability to autocheck available new images Parse remote URL JSON image-version.json file and compare version VyOS with a local current version, if find diff sent wall message that the new image is available Also, add op-mode command to check images "show system image" With option "auto-check" check will be once per 12 hours set system update-check auto-check set system update-check url 'http://example.com/image-version.json' If new version is available shows it per login (MOTD)
2022-09-06graphql: T4674: print included op-mode error message, if it existsJohn Estabrook
2022-09-06bridge: T4673: raise UnconfiguredSubsystem on non-existent bridge intfJohn Estabrook
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 01:07:08 +0000