| Age | Commit message (Collapse) | Author |
|---|
|
|
|
ipsec: T3473: Decode byte csa-name for op-mode
|
|
container: T2216: Add binding for ports and volumes
|
|
|
|
|
|
|
|
|
|
|
|
generate wireguard mobile-config wg0 server wg.vyos.net address 1.2.2.2/24
WireGuard client configuration for interface: wg0
[Interface]
PrivateKey = AEXrZ4b3xFVLg1lql3hy/93+d43q3+3vPdSMUGI6/Fo=
Address = 1.2.2.2/24
[Peer]
PublicKey = h1HkYlSuHdJN6Qv4Hz4bBzjGg5WUty+U1L7DJsZy1iE=
Endpoint = wg.vyos.net:41751
AllowedIPs = 0.0.0.0/0, ::/0
The servers public key and port are automatically extracter from the running
config.
|
|
When deleting a route-map, prefix-list or access-list, we must ensure that
this routing policy is not referenced by any other protocol or policy.
When trying to remove a policy still in use, raise an error.
|
|
container: T2216: Rewrite op-mode to python
|
|
|
|
|
|
|
|
This commit is a cleanup and refinement of the container hosting implementation.
- Renamed CLI node ipv4-prefix -> prefix so both IPv4 and IPv6 prefix can be
supplied in the future. This is currently limited to IPv4 only as when using
IPv6 networks in combination with IPv4 the IPv4 prefix is altered randomly
- De-nested if clauses
- Use "for foo, bar in baz.items()" to more easily iterate of dictionary
values, this means "bar" can be used to access "baz[foo]"
|
|
|
|
|
|
Some software starts dhclient without IP protocol flag (`-4`, `-6`),
this commit adds the ability to find such processes as well as with a
protocol flag.
Additionally, to handle rare situations when PID file may not exists
(most likely, when multiple dhclient processes started with the same
PID file path), added last-resort action to kill such dhclients.
|
|
When we match on a community-list, extended community-list or even a large
community-list ensure that the referenced list exists on the CLI.
|
|
|
|
|
|
get_config_dict()
|
|
|
|
|
|
T3472: Move over commit-confirm-notify.py from vyatta-config-mgmt
|
|
|
|
|
|
In this commit we add more address families within
BGP. This should bring VyOS the ability to enable
the rest of the capabilities within FRR.
Co-authored-by: Cheeze_It <none@none.com>
|
|
dhclient: T3392: Changed dhclient-script hooks for VRF
|
|
There were two problems with VRF support inside dhclient-script:
- VRF check inside the `01-vyos-cleanup` hook was needless because it will be done inside the `03-vyos-ipwrapper` anyway;
- VRF was ignored for in-kernel routes in `03-vyos-ipwrapper`. Theoretically, there must be no situation now when this can leads to a real problem, but better will be to keep both kernel and FRR backends in sync.
Also, the way to get and use a VRF name was changed to an easier one.
|
|
ipsec: T3333: Fix status for SA state op-mode
|
|
|
|
|
|
Since in some cases a dhclient command may not end with an interface name, the way to find out a list of dhclients running for a current interface was replaced to catch PIDs regardless of the exact command syntax.
|
|
login: T3455: Fix edit level configuration for user
|
|
containers: T2216: Add podman for containers
|
|
|
|
Removing the Zebra/Linux Kernel route-map added by "set protocols static route-map"
was not removed once applied. This was because the removal must happen within
the zebra daemon and not staticd.
|
|
Removing the Zebra/Linux Kernel route-map added by "set protocols rip route-map"
was not removed once applied. This was because the removal must happen within
the zebra daemon and not ripd.
|
|
Removing the Zebra/Linux Kernel route-map added by "set protocols isis route-map"
was not removed once applied. This was because the removal must happen within
the zebra daemon and not isisd.
|
|
Removing the Zebra/Linux Kernel route-map added by "set protocols ospf route-map"
was not removed once applied. This was because the removal must happen within
the zebra daemon and not ospfd.
|
|
Removing the Zebra/Linux Kernel route-map added by "set protocols bgp route-map"
was not removed once applied. This was because the removal must happen within
the zebra daemon and not bgpd.
|
|
|
|
|
|
It is only possible to set one local-as override per BGP neighbor/peer-group.
In addition to this, the override AS number is not allowed to be the same as
the one from the global BGP process.
If this would still be the case frr-reload would error out:
> frr-reload output: 184 % Cannot have local-as same as BGP AS number
|
|
After commit 73557d68 ("bgp: T1711: remove ASN tagNode and move to 'local-as'")
when the BGP tag node was removed there is no need anymore for a script based
completion helper, we can rather rely on the build in "path" variant.
|
|
nat: op-mode: T3435: Filter extra rules that should not be processed
|
|
|
|
The introduction of key_mangling=('-', '_') when working with get_config_dict()
caused more harm then good. This commit extends common helpers and adds new
helpers when verifying the existence of route-maps, access-lists or prefix-lists.
|
|
Commit 548d9057e3e (vrf: T3344: move dynamic routing protocols under "vrf name
<name> protocols") temporary removed the possibility to specify the VNI for a
given VRF to to changing of the CLI configuration nodes.
As VNI is set inside zebra, we can re-use the now widely deployed frr python
library to configure and change the configuration without any interference to
other FRR daemons.
|
