summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2020-08-26pppoe-server: T2829: migrate 'ppp-options mppe' to leafNodeChristian Poessinger
2020-08-26https: T2830: update to use get_config_dictJohn Estabrook
2020-08-23hostapd: T2564: bugfix on daemon startupChristian Poessinger
Commit b082a6fb21 ("lcd: T2564: flatten CLI interface") by accident replaced the template for hostapd which an LCD configuration during implementation of T2564. This has been corrected by restoring the content of the service configuration from commit 8efb8ba1e (one commit earlier).
2020-08-22dhcpv6-pd: T2677: optimize CLI interface for PD configurationChristian Poessinger
The current CLI did not support multiple prefix-delegations per interface. Some ISPs only send one /64 to a client per prefix-delegation request, but they allow the customer to request multiple prefixes. The 'dhcpv6-options prefix-delegation' node has been renamed and converted to a tag node named 'dhcpv6-options pd'. The tag node specifies a PD request (>=0). In the past the user needed to know what prefix will be assigned and required to calculate the sla-len by himself. The 'sla-len' node was dropped and is now calculated in the background from the 'dhcpv6-options pd 0 length' node. It is no longer mandatory to supply the 'sla-id' node, if sla-id is not specified it is 'guessed' by counting upwards. Example configuration: ---------------------- ethernet eth1 { address dhcpv6 dhcpv6-options { pd 0 { length 56 interface eth2 { address 1 } } } } This will request a /56 assignment from the ISP and will delegate a /64 network to interface eth2. VyOS will use the interface address ::1 on the delegate interface (eth2) as its local address.
2020-08-19https: T2815: adjust for change in certbot config directoryJohn Estabrook
2020-08-19certbot: T2815: change config dir to /config/auth/letsencryptJohn Estabrook
2020-08-20Merge pull request #530 from DmitriyEshenko/1x-anyconnect-fix01Christian Poessinger
anyconnect: T2811: Return None if anyconnect not configured
2020-08-20Merge pull request #531 from sever-sever/T915-timersChristian Poessinger
mpls-ldp: T915: Add discovery hello timers
2020-08-19mpls-ldp: T915: Add discovery hello timerssever-sever
2020-08-19lldp: op-mode: convert data processing from XML to JSONChristian Poessinger
2020-08-19anyconnect: T2811: Return None if anyconnect not configuredDmitriyEshenko
2020-08-18anyconnect: T2036: add anyconnect VPN supportEshenko Dmitriy
2020-08-18lcd: T2564: add support for Lanner, Watchguard, Symantec boxesChristian Poessinger
2020-08-16dhclient: T2277: remove VRF route when DHCP client exitsChristian Poessinger
2020-08-16ping: op-mode: T2762: always run in default VRF unless defined otherwiseChristian Poessinger
When connected to VyOS by SSH through any VRF, every command is executed in the VRF context thus e.g. ping will run in VRF context but no VRF was defined on the CLI. ping should always run in the default VRF no matter where it is executed, unless a VRF instance is explicitly defined by CLI.
2020-08-15dhclient: T2277: retrieve VRF inform from sysfs rather then iproute2Christian Poessinger
2020-08-15Merge branch 't2564-lcd' of github.com:c-po/vyos-1x into currentChristian Poessinger
* 't2564-lcd' of github.com:c-po/vyos-1x: lcd: T2564: flatten CLI interface system display: T2564: Added test model system display: T2564: Dictionary code update system display: T2564: Conf files to /run system display: T2564: Changed "duration" to "time" system display: T2564: py code cleanup system display: T2564: Replace "config (enabled|disabled)" with "display disabled" system display: T2564: Lowercase model names system display: T2564 Extend VyOS to support appliance LCDs
2020-08-15pseudo-ethernet: T2800: source-interface must not be member of a bridgeChristian Poessinger
2020-08-15pppoe-server: T2796: at least one server interface must be definedChristian Poessinger
Add missing verify() check that at least one interface must be defined to listen to PPPoE data.
2020-08-15lcd: T2564: flatten CLI interfaceChristian Poessinger
* set system lcd device <device> * set system lcd model <modeml> Both device and model have completion helpers for supported interfaces and LCD displays.
2020-08-14dhclient: T2277: Hook for default route in vrfsever-sever
2020-08-13console-server: T2490: use get_first_key=True on get_config_dict()Christian Poessinger
2020-08-12Merge branch 'system-display' of https://github.com/fmertz/vyos-1x into ↵Christian Poessinger
t2564-lcd * 'system-display' of https://github.com/fmertz/vyos-1x: system display: T2564: Added test model system display: T2564: Dictionary code update system display: T2564: Conf files to /run system display: T2564: Changed "duration" to "time" system display: T2564: py code cleanup system display: T2564: Replace "config (enabled|disabled)" with "display disabled" system display: T2564: Lowercase model names system display: T2564 Extend VyOS to support appliance LCDs
2020-08-10host_name: T2784: remove unused importsJohn Estabrook
2020-08-10host_name: T2784: remove unused arg in verify, unneeded arg in get_configJohn Estabrook
2020-08-04ssh: T2651: add cli options for source addressChristian Poessinger
When running SSH from the VyOS system the source IP address can be set by: set system options ssh-client source-address x.x.x.x
2020-08-04router-advert: T2758: bugfix 'infinity' is not a valid integer numberChristian Poessinger
Problem was introduced in commit 740ace13 ("router-advert: T2609: add missing verify() for prefix lifetime"). The 'infinity' literal was not converted to its corresponding integer 0xffffffff (4294967295) for the check.
2020-08-04cleanup: convert multiple files from DOS to UNIX line endingChristian Poessinger
2020-08-03op-mode: T2546: use inline shell code for "configure"Christian Poessinger
Commit 787879ba ("configure: op-mode: move XML here") migrated the op-mode command "configure" to vyos-1x. The used shell snipped in turn sometimes complained about: "_vyatta_op_do_key_bindings: command not found". This is now resolved by moving the code entirely into the node.def file.
2020-08-03ssh: T1076: make configuration volatileChristian Poessinger
Move sshd_config file to /run so it must be generated on every boot and is not stored accidently.
2020-08-03lldp: op-mode: T2323: "show lldp neighbors detail" only works when service runsChristian Poessinger
The problem exists when LLDP is not configured but one wants to run the detail command. Running "show lldp neighbors" is not possible when LLDP is not running. This case is already handled for "show lldp neighbors" and has been extended for "show lldp neighbors detail".
2020-08-03configure: op-mode: move XML hereChristian Poessinger
2020-08-03ifconfig: T2740: pass config dict to DHCP class for IPv6Christian Poessinger
This removes additional code paths as we can instatly work with the input dict the same was as it was done for PPPoE. This fixes the entire DHCPv6-PD support on non PPPoE interfaces as this was lost in translation while processing T2653.
2020-08-02accel-ppp: T2756: make RADIUS accounting port configurableChristian Poessinger
Make the port used for RADIUS accounting user configurable. This is now valid for the following services which are based on Accel-PPP: * ipoe-server * pppoe-server * l2tp * pptp * sstp
2020-08-02ipoe-server: T2314: fix improper use of fail-time dictionary keyChristian Poessinger
2020-07-30router-advert: T2745: migrate to get_config_dict()Christian Poessinger
2020-07-29wireguard: T2743: move key migration from config script to migration scriptChristian Poessinger
Migration files on the storage should be done one time by a migration script instead of every time the configuration changes. Moving this to an older migration script is fine as this is around for a long time and all rolling releases are already up2date. It only affects updates from VyOS 1.2 series.
2020-07-29mdns-repeater: T2742: migrate to get_config_dict()Christian Poessinger
2020-07-26wireguard: ifconfig: T2653: move to get_config_dict()Christian Poessinger
The current VyOS CLI parser code written in Python contains a ton of duplicates which I can also hold myself accountable for - or maybe mainly me - depends on the angle of judge.
2020-07-26vxlan: ifconfig: T2653: move to get_interface_dict()Christian Poessinger
The current VyOS CLI parser code written in Python contains a ton of duplicates which I can also hold myself accountable for - or maybe mainly me - depends on the angle of judge.
2020-07-25l2tpv3: ifconfig: T2653: move implementation to get_interface_dict()Christian Poessinger
The current VyOS CLI parser code written in Python contains a ton of duplicates which I can also hold myself accountable for - or maybe mainly me - depends on the angle of judge.
2020-07-25Revert "Merge pull request #423 from thomas-mangin/T2494"Christian Poessinger
This reverts commit bfbf51acb2d4b6b5fe2d22d39f7259686f98d2a0, reversing changes made to 1a85e758b105d493bb9d95916816bd206345bc5d.
2020-07-25Merge branch 'interface-rewrite' of github.com:c-po/vyos-1x into currentChristian Poessinger
* 'interface-rewrite' of github.com:c-po/vyos-1x: vyos.configverify: T2653: fix some formatting issues ifconfig: T2653: make ifname an optional argument to get_interface_dict() vyos.configdict: T2653: remove obsolete code from configdict and ifconfig_vlan wireless: ifconfig: T2653: move to get_config_dict() ifconfig: T2653: move get_ethertype() from configdict to interface vlan: ifconfig: T2653: move get_removed_vlans() to vyos.configdiff bonding: ifconfig: T2653: move to get_config_dict() ifconfig: T2653: move vlan configuration code to base class vyos.configdict: T2653: use dict_merge() over update() ifconfig: T2653: implement update() in derived classes for admin up/down vyos.configdict: T2653: add new reusable helper node_changed() geneve: ifconfig: T2653: move to get_config_dict() ifconfig: T2653: move bridge member check to base class interfaces: ifconfig: T2653: migrate to get_interface_dict() API pseudo-ethernet: ifconfig: T2653: move to get_config_dict() bridge: ifconfig: T2653: move to get_config_dict() vlan: ifconfig: T2653: only enable interface when lower interface is up ethernet: ifconfig: T2653: move to get_config_dict() ifconfig: T2653: set arp-cache-timeout default value of 30ms
2020-07-25Merge pull request #423 from thomas-mangin/T2494Christian Poessinger
systemd: T2494: allow to restart vyos-hostsd without consequence
2020-07-25ifconfig: T2653: make ifname an optional argument to get_interface_dict()Christian Poessinger
Further reduce the boiler-plate code to determine interface tag node or not. It can be passed into get_interface_dict() if explicitly required - else it is taken from the environment.
2020-07-25wireless: ifconfig: T2653: move to get_config_dict()Christian Poessinger
The current VyOS CLI parser code written in Python contains a ton of duplicates which I can also hold myself accountable for - or maybe mainly me - depends on the angle of judge.
2020-07-25bonding: ifconfig: T2653: move to get_config_dict()Christian Poessinger
The current VyOS CLI parser code written in Python contains a ton of duplicates which I can also hold myself accountable for - or maybe mainly me - depends on the angle of judge.
2020-07-25vyos.configdict: T2653: add new reusable helper node_changed()Christian Poessinger
This can be used to see if a tagNode has been changed. It will return a list of changed nodes.
2020-07-25geneve: ifconfig: T2653: move to get_config_dict()Christian Poessinger
The current VyOS CLI parser code written in Python contains a ton of duplicates which I can also hold myself accountable for - or maybe mainly me - depends on the angle of judge.
2020-07-25interfaces: ifconfig: T2653: migrate to get_interface_dict() APIChristian Poessinger
After switching from raw parsing of the interface options to get_config_dict() this utilizes another utility function which wraps get_config_dict() and adds other common and reused parameters (like deleted or bridge member). Overall this drops redundant code (again) and makes the rest more maintainable as we only utilize a single function.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 02:56:40 +0000