summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2023-11-30ddclient: T5574: Support per-service cache management for servicesIndrajit Raychaudhuri
Add support for per-service cache management for ddclient providers via `wait-time` and `expiry-time` options. This allows for finer-grained control over how often a service is updated and how long the hostname will be cached before being marked expired in ddclient's cache. More specifically, `wait-time` controls how often ddclient will attempt to check for a change in the hostname's IP address, and `expiry-time` controls how often ddclient to a forced update of the hostname's IP address. These options intentionally don't have any default values because they are provider-specific. They get treated similar to the other provider- specific options in that they are only used if defined.
2023-11-30ddclient: T5612: Additional refactoring for scripts and smoketestsIndrajit Raychaudhuri
Additional cleanup and refactoring for ddclient scripts including the smotektests.
2023-11-30ddclient: T5612: Adjust validator and completion for ddclientIndrajit Raychaudhuri
Adjust the validator and completion for ddclient to remove unsupported or superfluous protocols. Specifically, - remove 'nsupdate' protocol from the list because there is a separate config path for that protocol (rfc2136) - remove 'cloudns' protocol from the list because it has non standard configuration and is not supported by our configurator at this time
2023-11-30ddclient: T5612: Improve dual stack support for dyndns2 protocolIndrajit Raychaudhuri
dyndns2 protocol in ddclient honors dual stack for selective servers because of the way it is implemented in ddclient. We formalize the well known servers that support dual stack in a list and check against it when validating the configuration.
2023-11-30ddclient: T5612: Enable TTL support for web-service based protocolsIndrajit Raychaudhuri
Enable TTL support for web-service based protocols in addition to RFC2136 based (nsupdate) protocol. Since TTL is not supported by all protocols, and thus cannot have a configuration default, the existing XML snippet `include/dns/time-to-live.xml.i` does not have common `<defaultValue>300</defaultValue>` anymore and is instead added explicitly whenever necessary.
2023-11-30ddclient: T5612: Fix VRF support for ddclient serviceIndrajit Raychaudhuri
Fix VRF support interface definition and configuration mode for ddclient to actually capture the VRF name and pass it to the template.
2023-11-30Merge pull request #2526 from vyos/mergify/bp/sagitta/pr-2503Daniil Baturin
vxlan: T5759: change default MTU from 1450 -> 1500 bytes (backport #2503)
2023-11-23https api: T5772: check if keys are configuredDaniil Baturin
unless PAM auth is enabled for GraphQL (cherry picked from commit 8c450ea7f538beb0b2cd21d35c05d18db49a1802)
2023-11-22pppoe: T5630: make MRU default to MTU if unspecifiedChristian Breunig
This fixes the implementation in e062a8c11 ("pppoe: T5630: allow to specify MRU in addition to already configurable MTU") and restores the bahavior that MRU defaults to MTU if MRU is not explicitly set. This was the behavior in VyOS 1.3.3 and below before we added ability to define the MRU value. (cherry picked from commit ffd7339e2ea3eafdd97ac0763ca4a3913fe71bf3)
2023-11-22vxlan: T5759: change default MTU from 1450 -> 1500 bytesChristian Breunig
Found an odd behavior on Linux and the VyOS CLI implementation. If adding VXLAN interfaces using iproute2 the MTU differs depending on the creation syntax: ip -4 link add vxlan100 type vxlan dstport 4789 external df unset tos inherit \ ttl 16 nolearning vnifilter local 172.16.33.201 ip -4 link add vxlan200 type vxlan id 200 dstport 4789 local 172.16.33.201 dev eth0 ip -6 link add vxlan300 type vxlan id 300 dstport 4789 local 2001:db8:1::1 dev eth0 132: vxlan300: <BROADCAST,MULTICAST> mtu 1430 qdisc noop state DOWN group default qlen 1000 link/ether 4e:fb:e3:f5:d9:59 brd ff:ff:ff:ff:ff:ff 133: vxlan200: <BROADCAST,MULTICAST> mtu 1450 qdisc noop state DOWN group default qlen 1000 link/ether 0e:4e:f4:76:59:3f brd ff:ff:ff:ff:ff:ff 134: vxlan100: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether ba:b6:b7:0c:b1:37 brd ff:ff:ff:ff:ff:ff VyOS always sets a default MTU of 1450 bytes which is correct for IPv4 p2p links or multicast, but invalid for IPv6 p2p. Also this will break EVPN deployments as ethernet bridges with MTU < 1500 bytes are less fun. Increase default MTU to 1500 bytes. Migrate old configurations to use 1450 bytes if not specified otherwise on the CLI. (cherry picked from commit 4a163b016333e58fee9d6ec6b53a09e0160b3213)
2023-11-22vxlan: T5753: add support for VNI filteringChristian Breunig
In a service provider network a service provider typically supports multiple bridge domains with overlapping vlans. One bridge domain per customer. Vlans in each bridge domain are mapped to globally unique VXLAN VNI ranges assigned to each customer. Without the ability of VNI filtering, we can not provide VXLAN tunnels with multiple tenants all requiring e.g. VLAN 10. To Test: set interfaces vxlan vxlan987 parameters external set interfaces vxlan vxlan987 source-interface eth0 set interfaces vxlan vxlan987 parameters vni-filter set interfaces vxlan vxlan987 vlan-to-vni 50 vni 10050 set interfaces vxlan vxlan987 vlan-to-vni 51 vni 10051 set interfaces vxlan vxlan987 vlan-to-vni 52 vni 10052 set interfaces vxlan vxlan987 vlan-to-vni 53 vni 10053 set interfaces vxlan vxlan987 vlan-to-vni 54 vni 10054 set interfaces vxlan vxlan987 vlan-to-vni 60 vni 10060 set interfaces vxlan vxlan987 vlan-to-vni 69 vni 10069 set interfaces bridge br0 member interface vxlan987 Add new op-mode command: show bridge vni Interface VNI ----------- ----------- vxlan987 10050-10054 vxlan987 10060 vxlan987 10069 (cherry picked from commit 35f6033d21053fa420e837f157cd9377a4ccd26a)
2023-11-22http: T5762: rename "virtual-host listen-port" -> "virtual-host port"Christian Breunig
This complements commit f5e43b136 ("http: T5762: api: make API socket backend communication the one and only default") so we have a consistent port CLI node across VyOS components. (cherry picked from commit 0e885f1bf01424130b6876e769cc42612b19351b)
2023-11-22Merge pull request #2521 from vyos/mergify/bp/sagitta/pr-2516Daniil Baturin
T5767: HTTPS API add reboot and poweroff endpoints (backport #2516)
2023-11-21T5767: HTTPS API add reboot and poweroff endpointsViacheslav Hletenko
Add ability to reboot and poweroff the system via API curl -k --location --request POST 'https://vyos/reboot' \ --form data='{"op": "reboot", "path": ["now"]}' \ --form key='apikey' curl -k --location --request POST 'https://vyos/poweroff' \ --form data='{"op": "poweroff", "path": ["now"]}' \ --form key='apikey' (cherry picked from commit 36f3c329c2df0e78f2f5da933d9729a872fb2a11)
2023-11-21T5419: firewall: backport firewall flowtable to Sagitta.Nicolas Fort
2023-11-21Merge pull request #2512 from zdc/T5577-sagittaChristian Breunig
PAM: T5577: Backported PAM settings from circinus
2023-11-20Merge pull request #2514 from vyos/mergify/bp/sagitta/pr-2511Christian Breunig
T5763: fix imprecise check for remote file name (backport #2511)
2023-11-20http: T5762: api: make API socket backend communication the one and only defaultChristian Breunig
Why: Smoketests fail as they can not establish IPv6 connection to uvicorn backend server. https://github.com/vyos/vyos-1x/pull/2481 added a bunch of new smoketests. While debugging those failing, it was uncovered, that uvicorn only listens on IPv4 connections vyos@vyos# netstat -tulnp | grep 8080 (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN - As the CLI already has an option to move the API communication from an IP to a UNIX domain socket, the best idea is to make this the default way of communication, as we never directly talk to the API server but rather use the NGINX reverse proxy. (cherry picked from commit f5e43b1361fb59a9c260739bdb28729d5119507c)
2023-11-20T5763: fix imprecise check for remote file nameJohn Estabrook
(cherry picked from commit fe9b08665367b8e7d9b906a0760d44efc9b5cafb)
2023-11-20init: T5577: clear mandatory and optional RADIUS/TACACS PAM settingsChristian Breunig
This complements commit 5181ab60bb ("RADIUS: T5577: Added 'mandatory' and 'optional' modes for RADIUS") and commit 1c804685d0 ("TACACS: T5577: Added 'mandatory' and 'optional' modes for TACACS+"). As those new services should also be cleaned during system boot.
2023-11-20pam: T5577: Improved PAM configs for RADIUS and TACACS+zsdc
After sources analysis, we found the next possible return statuses for PAM modules: 1. pam_tacplus Auth: - PAM_AUTH_ERR - PAM_AUTHINFO_UNAVAIL - PAM_AUTHTOK_ERR - PAM_BUF_ERR - PAM_CRED_INSUFFICIENT - PAM_PERM_DENIED - PAM_SUCCESS - PAM_USER_UNKNOWN Account: - PAM_AUTH_ERR - PAM_AUTHINFO_UNAVAIL - PAM_PERM_DENIED - PAM_SUCCESS - PAM_USER_UNKNOWN Session: - PAM_AUTHINFO_UNAVAIL - PAM_SESSION_ERR - PAM_SUCCESS - PAM_USER_UNKNOWN 2. pam_radius_auth Auth: - PAM_ABORT - PAM_AUTH_ERR - PAM_AUTHINFO_UNAVAIL - PAM_AUTHTOK_ERR - PAM_BAD_ITEM - PAM_BUF_ERR - PAM_CONV_AGAIN - PAM_CONV_ERR - PAM_IGNORE - PAM_NO_MODULE_DATA - PAM_PERM_DENIED - PAM_SUCCESS - PAM_SYSTEM_ERR - PAM_USER_UNKNOWN Account: - PAM_SUCCESS Session: - PAM_ABORT - PAM_AUTHINFO_UNAVAIL - PAM_BAD_ITEM - PAM_BUF_ERR - PAM_CONV_AGAIN - PAM_CONV_ERR - PAM_IGNORE - PAM_NO_MODULE_DATA - PAM_PERM_DENIED - PAM_SUCCESS - PAM_SYSTEM_ERR - PAM_USER_UNKNOWN PAM configurations were replaced with tuned versions to take this into account.
2023-11-20TACACS: T5577: Added `mandatory` and `optional` modes for TACACS+zsdc
In CLI we can choose authentication logic: - `mandatory` - if TACACS+ answered with `REJECT`, authentication must be stopped and access denied immediately. - `optional` (default) - if TACACS+ answers with `REJECT`, authentication continues using the next module. In `mandatory` mode authentication will be stopped only if TACACS+ clearly answered that access should be denied (no user in TACACS+ database, wrong password, etc.). If TACACS+ is not available or other errors happen, it will be skipped and authentication will continue with the next module, like in `optional` mode.
2023-11-20RADIUS: T5577: Added `mandatory` and `optional` modes for RADIUSzsdc
In CLI we can choose authentication logic: - `mandatory` - if RADIUS answered with `Access-Reject`, authentication must be stopped and access denied immediately. - `optional` (default) - if RADIUS answers with `Access-Reject`, authentication continues using the next module. In `mandatory` mode authentication will be stopped only if RADIUS clearly answered that access should be denied (no user in RADIUS database, wrong password, etc.). If RADIUS is not available or other errors happen, it will be skipped and authentication will continue with the next module, like in `optional` mode.
2023-11-18T5749: Swap show interfaces and show interfaces summaryViacheslav Hletenko
By default show VRF, MAC, MTU for `show interfaces` The original `show interfaces` moved to `show interfacces summary` (cherry picked from commit 056885c02b8671279808c226a759de6c5356f578)
2023-11-16T3983: show pki certificate Doesnt show x509 certificatesJeffWDH
(cherry picked from commit 36de14913e0f4370d7c4e2828032a5378d3bba77)
2023-11-16Merge pull request #2489 from vyos/mergify/bp/sagitta/pr-2476Christian Breunig
pim(6): T5733: add missing FRR related features (backport #2476)
2023-11-16T5747: op-mode add MAC and MTU for show interfaces summaryViacheslav Hletenko
Add op-mode "show interfaces summary" Add MAC, VRF and MTU options: vyos@r4# run show interfaces summary Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down Interface IP Address MAC VRF MTU S/L Description ----------- ----------------- ----------------- ------- ----- ----- ------------- dum0 203.0.113.1/32 96:44:ad:c5:a1:a5 default 1500 u/u eth0 192.168.122.14/24 52:54:00:f1:fd:77 default 1500 u/u WAN eth1 192.0.2.1/24 52:54:00:04:33:2b foo 1500 u/u LAN-eth1 eth2 - 52:54:00:40:2e:af default 1504 u/u LAN-eth2 eth3 - 52:54:00:09:a4:b4 default 1500 A/D (cherry picked from commit dc3906f04fbfe8014531e092a77c1c8c2d10dfe0)
2023-11-15pim: T5733: incorporate feedback from peer reviewChristian Breunig
(cherry picked from commit 64b4cfc71d402222fd6b034336b3588b5986ba24)
2023-11-15pim6: T5733: add missing FRR PIM6 related featuresChristian Breunig
(cherry picked from commit 403d2ffd6e46cb082b1d16ddf515e1784bee968c) # Conflicts: # data/templates/frr/pim6d.frr.j2 # interface-definitions/protocols-pim6.xml.in # smoketest/scripts/cli/test_protocols_pim6.py # src/conf_mode/protocols_pim6.py
2023-11-15pim: T5733: fix CLI level of global PIM commandsChristian Breunig
(cherry picked from commit dd13213ae94f071bc30cc17f5fabef02fbf95939)
2023-11-15igmp: T5736: migrate "protocols igmp" to "protocols pim"Christian Breunig
IGMP and PIM are two different but related things. FRR has both combined in pimd. As we use get_config_dict() and FRR reload it is better to have both centrally stored under the same CLI node (as FRR does, too) to just "fire and forget" the commit to the daemon. "set protocols igmp interface eth1" -> "set protocols pim interface eth1 igmp" (cherry picked from commit bc83fb097719f5c4c803808572f690fbc367b9e5)
2023-11-15pim: T5733: add missing FRR PIM related featuresChristian Breunig
Migrate CLI configuration retrival to common get_config_dict(). In addition add new functionality to VyOS that is PIM related and already available in FRR. (cherry picked from commit 9abc02edcc237760f1f8aa1b3f08d7f4d18f866c) # Conflicts: # python/vyos/frr.py # src/op_mode/restart_frr.py
2023-11-15T5732: generate firewall rule-resequence drops geoip country-code from outputJeffWDH
(cherry picked from commit aa7a5131a5d1bd901ffdc7670a62bad8218147ab)
2023-11-15Merge pull request #2474 from vyos/mergify/bp/sagitta/pr-2435Christian Breunig
mtr: T5658: Add VRF support for mtr (+ op_mode wrapper) (backport #2435)
2023-11-14T5729: T5590: T5616: backport to sagita fwall marks, fix on firewall logs ↵Nicolas Fort
parsing, and migration to valueless node for log and state matchers
2023-11-12op-mode: T5658: fix "monitor traceroute" completion helperChristian Breunig
(cherry picked from commit c0de93d37354ec89f44dde7f1b5a4c8af550a019)
2023-11-12op-mode: T5658: reduce amount of exposed optionsChristian Breunig
Example: we should focus on JSON output and not expose XML and CSV. (cherry picked from commit b8e9daf12eaef46747e7379042f8acd575e5b1d6)
2023-11-12T5658: add common methods interface_list() and vrf_list() to vyos.utils.networkChristian Breunig
Reduce amount of duplicated (3 times) code in op-mode scripts for ping, traceroute and mtr. (cherry picked from commit 7b27a20c8664460482301cc8d7554048f152485e)
2023-11-12op-mode: T5658: add VRF support for "monitor traceroute"bbabich
(cherry picked from commit 07ecc0c33fb32878cac25ec84f2f3a977588f0dd)
2023-11-11dhclient: T5724: run user hooks using run_hookdirgavol
User hooks are executed using run_hookdir (defined in the /sbin/dhclient-script script) instead of run-parts. That allows user hooks to modify variables set by the dhcp client (e.g., the new_routers variable to avoid the installation of the default routes). (cherry picked from commit 645a0e768e27912a3f46d00de31d0fc79b6fd463)
2023-11-09T1797: Delete VPP from vyos-1x as it is implemented in addonViacheslav Hletenko
(cherry picked from commit 59c8d5febb2b1333643372f8956fa8f219d022cb)
2023-11-07T5559: Add static neighbor-proxy featureViacheslav Hletenko
Ability to set ip neigbhor proxy set protocols static neighbor-proxy arp 192.0.2.1 interface 'eth0' set protocols static neighbor-proxy arp 192.0.2.2 interface 'eth0' set protocols static neighbor-proxy nd 2001:db8::1 interface 'eth1' (cherry picked from commit c56af995b6e3d867c2a67deeb4be79e498f0a7cf)
2023-11-07Merge pull request #2455 from vyos/mergify/bp/sagitta/pr-2437Christian Breunig
T5713: Strip string after "secret" in IPSEC configs (backport #2437)
2023-11-07Merge pull request #2456 from vyos/mergify/bp/sagitta/pr-2436Christian Breunig
T5706: Add custom systemd udev rules to exclude dynamic interfaces (backport #2436)
2023-11-07T5706: Add custom systemd udev rules to exclude dynamic interfacesViacheslav Hletenko
Add custom systemd udev rules to exclude some regular and dynamic interfaces from "systemd-sysctl" calls. It fixes high CPU utilization (100%) as we have a lot of calls per interface for dynamic interfaces like ppp|ipoe|sstp etc. /lib/systemd/systemd-udevd should not be called for those interfaces (cherry picked from commit ca9cc86233520eb495c17602bf7a110094c1d8e7)
2023-11-07T5713: only strip "secret" CLI node and nothing elseChristian Breunig
Commit 30eb308149 ("T5713: Strip string after "secret" in IPSEC config") had good intention but this will happen: use-secret foo CLI node will become " secret xxxxxx" so the output of strip-private invalidates the configuration. This has been changed to an exact match of "secret" only (cherry picked from commit 863af115df853987dd8ad25ecef3f0ea58485e83)
2023-11-07T5713: Strip string after "secret" in IPSEC configRageLtMan
Make "strip-private" strip the string after "secret" (cherry picked from commit 30eb308149f24b7f15aa3e40ced6918a8a3a04b8)
2023-11-07T5720: Fix for PPPoE-server adding new interfacesViacheslav Hletenko
If we add a new interface for PPPoe-server we MUST restart the `accel-ppp@pppoe.service` as `reload` is not implemented for accel-ppp daemon Otherwise we have listen interface in the /run/accel-pppd/pppoe.conf which does not work (cherry picked from commit ffda9068b22e2d8a6841fcd8cdf62bbe266ea02c)
2023-11-07Merge pull request #2444 from vyos/mergify/bp/sagitta/pr-2416Christian Breunig
T5698 EVPN ESI Multihoming (backport #2416)
2023-11-06bond: T5698: add support for EVPN MultihomingChristian Breunig
set interfaces bonding bond10 evpn es-df-pref '50' set interfaces bonding bond10 evpn es-id '10' set interfaces bonding bond10 evpn es-sys-mac '01:23:45:67:89:ab' set interfaces bonding bond10 member interface 'eth3' set interfaces bonding bond10 mode '802.3ad' (cherry picked from commit 937685608e61151275c4f60c6d00c0154f2ca06d)
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 12:56:30 +0000