From 3abeef7e4bf6b59b8e58b31600b536a5a07d981e Mon Sep 17 00:00:00 2001 From: Christian Poessinger Date: Fri, 25 Sep 2020 20:58:59 +0200 Subject: ethernet: T2912: verify() that hardware supports specified MTU value Check the hardware if MTU value is supported at all. --- src/conf_mode/interfaces-ethernet.py | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/src/conf_mode/interfaces-ethernet.py b/src/conf_mode/interfaces-ethernet.py index a8df64cce..5468c7bda 100755 --- a/src/conf_mode/interfaces-ethernet.py +++ b/src/conf_mode/interfaces-ethernet.py @@ -20,11 +20,12 @@ from sys import exit from vyos.config import Config from vyos.configdict import get_interface_dict -from vyos.configverify import verify_interface_exists -from vyos.configverify import verify_dhcpv6 from vyos.configverify import verify_address -from vyos.configverify import verify_vrf +from vyos.configverify import verify_dhcpv6 +from vyos.configverify import verify_interface_exists +from vyos.configverify import verify_mtu from vyos.configverify import verify_vlan_config +from vyos.configverify import verify_vrf from vyos.ifconfig import EthernetIf from vyos import ConfigError from vyos import airbag @@ -57,6 +58,7 @@ def verify(ethernet): if ethernet.get('speed', None) != 'auto': raise ConfigError('If duplex is hardcoded, speed must be hardcoded, too') + verify_mtu(ethernet) verify_dhcpv6(ethernet) verify_address(ethernet) verify_vrf(ethernet) -- cgit v1.2.3