From ae0ca9f5e54b841eb8ff37b41033bcca74d6827c Mon Sep 17 00:00:00 2001 From: Viacheslav Hletenko Date: Mon, 10 Jun 2024 09:21:58 +0000 Subject: T751: Remove ids suricata --- data/templates/ids/suricata.j2 | 1280 -------------------- data/templates/ids/suricata_logrotate.j2 | 17 - debian/control | 2 - interface-definitions/service_suricata.xml.in | 238 ---- op-mode-definitions/suricata.xml.in | 23 - src/conf_mode/service_suricata.py | 161 --- .../system/suricata.service.d/10-override.conf | 9 - 7 files changed, 1730 deletions(-) delete mode 100644 data/templates/ids/suricata.j2 delete mode 100644 data/templates/ids/suricata_logrotate.j2 delete mode 100644 interface-definitions/service_suricata.xml.in delete mode 100644 op-mode-definitions/suricata.xml.in delete mode 100755 src/conf_mode/service_suricata.py delete mode 100644 src/etc/systemd/system/suricata.service.d/10-override.conf diff --git a/data/templates/ids/suricata.j2 b/data/templates/ids/suricata.j2 deleted file mode 100644 index 585db93eb..000000000 --- a/data/templates/ids/suricata.j2 +++ /dev/null @@ -1,1280 +0,0 @@ -%YAML 1.1 ---- - -# Suricata configuration file. In addition to the comments describing all -# options in this file, full documentation can be found at: -# https://suricata.readthedocs.io/en/latest/configuration/suricata-yaml.html -# -# This configuration file generated by: -# Suricata 6.0.10 - -## -## Step 1: Inform Suricata about your network -## - -vars: - # more specific is better for alert accuracy and performance - address-groups: -{% for (name, value) in suricata['address_group'] %} - {{ name }}: "[{{ value | join(',') }}]" -{% endfor %} - - port-groups: -{% for (name, value) in suricata['port_group'] %} - {{ name }}: "[{{ value | join(',') }}]" -{% endfor %} - -## -## Step 2: Select outputs to enable -## - -# The default logging directory. Any log or output file will be -# placed here if it's not specified with a full path name. This can be -# overridden with the -l command line parameter. -default-log-dir: /var/log/suricata/ - -# Configure the type of alert (and other) logging you would like. -{% if suricata.log is vyos_defined %} -outputs: -{% if suricata.log.eve is vyos_defined %} - # Extensible Event Format (nicknamed EVE) event log in JSON format - - eve-log: - enabled: yes - filetype: {{ suricata.log.eve.filetype }} #regular|syslog|unix_dgram|unix_stream|redis - filename: {{ suricata.log.eve.filename }} - - types: -{% if suricata.log.eve.type is not vyos_defined or "alert" in suricata.log.eve.type %} - - alert: - tagged-packets: yes -{% endif %} -{% if "http" in suricata.log.eve.type %} - - http: - enabled: yes - extended: yes -{% endif %} -{% if "tls" in suricata.log.eve.type %} - - tls: - enabled: yes - extended: yes # enable this for extended logging information -{% endif %} -{% for protocol in suricata.log.eve.type %} -{% if protocol not in ["alert","http","tls"] %} - - {{ protocol }}: - enabled: yes -{% endif %} -{% endfor %} -{% endif %} -{% endif %} - -## -## Step 3: Configure common capture settings -## -## See "Advanced Capture Options" below for more options, including Netmap -## and PF_RING. -## - -# Linux high speed capture support -af-packet: -{% for interface in suricata.interface %} - - interface: {{ interface }} - # Default clusterid. AF_PACKET will load balance packets based on flow. - cluster-id: 99 - # Default AF_PACKET cluster type. AF_PACKET can load balance per flow or per hash. - # This is only supported for Linux kernel > 3.1 - # possible value are: - # * cluster_flow: all packets of a given flow are sent to the same socket - # * cluster_cpu: all packets treated in kernel by a CPU are sent to the same socket - # * cluster_qm: all packets linked by network card to a RSS queue are sent to the same - # socket. Requires at least Linux 3.14. - # * cluster_ebpf: eBPF file load balancing. See doc/userguide/capture-hardware/ebpf-xdp.rst for - # more info. - # Recommended modes are cluster_flow on most boxes and cluster_cpu or cluster_qm on system - # with capture card using RSS (requires cpu affinity tuning and system IRQ tuning) - cluster-type: cluster_flow - # In some fragmentation cases, the hash can not be computed. If "defrag" is set - # to yes, the kernel will do the needed defragmentation before sending the packets. - defrag: yes -{% endfor %} - -# Cross platform libpcap capture support -pcap: -{% for interface in suricata.interface %} - - interface: {{ interface }} -{% endfor %} - -# Settings for reading pcap files -pcap-file: - # Possible values are: - # - yes: checksum validation is forced - # - no: checksum validation is disabled - # - auto: Suricata uses a statistical approach to detect when - # checksum off-loading is used. (default) - # Warning: 'checksum-validation' must be set to yes to have checksum tested - checksum-checks: auto - -# See "Advanced Capture Options" below for more options, including Netmap -# and PF_RING. - - -## -## Step 4: App Layer Protocol configuration -## - -# Configure the app-layer parsers. -# -# The error-policy setting applies to all app-layer parsers. Values can be -# "drop-flow", "pass-flow", "bypass", "drop-packet", "pass-packet", "reject" or -# "ignore" (the default). -# -# The protocol's section details each protocol. -# -# The option "enabled" takes 3 values - "yes", "no", "detection-only". -# "yes" enables both detection and the parser, "no" disables both, and -# "detection-only" enables protocol detection only (parser disabled). -app-layer: - # error-policy: ignore - protocols: - rfb: - enabled: yes - detection-ports: - dp: 5900, 5901, 5902, 5903, 5904, 5905, 5906, 5907, 5908, 5909 - # MQTT, disabled by default. - mqtt: - enabled: yes - # max-msg-length: 1mb - # subscribe-topic-match-limit: 100 - # unsubscribe-topic-match-limit: 100 - # Maximum number of live MQTT transactions per flow - # max-tx: 4096 - krb5: - enabled: yes - snmp: - enabled: yes - ikev2: - enabled: yes - tls: - enabled: yes - detection-ports: - dp: 443 - - # Generate JA3 fingerprint from client hello. If not specified it - # will be disabled by default, but enabled if rules require it. - #ja3-fingerprints: auto - - # What to do when the encrypted communications start: - # - default: keep tracking TLS session, check for protocol anomalies, - # inspect tls_* keywords. Disables inspection of unmodified - # 'content' signatures. - # - bypass: stop processing this flow as much as possible. No further - # TLS parsing and inspection. Offload flow bypass to kernel - # or hardware if possible. - # - full: keep tracking and inspection as normal. Unmodified content - # keyword signatures are inspected as well. - # - # For best performance, select 'bypass'. - # - #encryption-handling: default - - dcerpc: - enabled: yes - ftp: - enabled: yes - # memcap: 64mb - rdp: - enabled: yes - ssh: - enabled: yes - #hassh: yes - # HTTP2: Experimental HTTP 2 support. Disabled by default. - http2: - enabled: no - # use http keywords on HTTP2 traffic - http1-rules: no - smtp: - enabled: yes - raw-extraction: no - # Configure SMTP-MIME Decoder - mime: - # Decode MIME messages from SMTP transactions - # (may be resource intensive) - # This field supersedes all others because it turns the entire - # process on or off - decode-mime: yes - - # Decode MIME entity bodies (ie. Base64, quoted-printable, etc.) - decode-base64: yes - decode-quoted-printable: yes - - # Maximum bytes per header data value stored in the data structure - # (default is 2000) - header-value-depth: 2000 - - # Extract URLs and save in state data structure - extract-urls: yes - # Set to yes to compute the md5 of the mail body. You will then - # be able to journalize it. - body-md5: no - # Configure inspected-tracker for file_data keyword - inspected-tracker: - content-limit: 100000 - content-inspect-min-size: 32768 - content-inspect-window: 4096 - imap: - enabled: detection-only - smb: - enabled: yes - detection-ports: - dp: 139, 445 - - # Stream reassembly size for SMB streams. By default track it completely. - #stream-depth: 0 - - nfs: - enabled: yes - tftp: - enabled: yes - dns: - tcp: - enabled: yes - detection-ports: - dp: 53 - udp: - enabled: yes - detection-ports: - dp: 53 - http: - enabled: yes - # memcap: Maximum memory capacity for HTTP - # Default is unlimited, values can be 64mb, e.g. - - # default-config: Used when no server-config matches - # personality: List of personalities used by default - # request-body-limit: Limit reassembly of request body for inspection - # by http_client_body & pcre /P option. - # response-body-limit: Limit reassembly of response body for inspection - # by file_data, http_server_body & pcre /Q option. - # - # For advanced options, see the user guide - - - # server-config: List of server configurations to use if address matches - # address: List of IP addresses or networks for this block - # personality: List of personalities used by this block - # - # Then, all the fields from default-config can be overloaded - # - # Currently Available Personalities: - # Minimal, Generic, IDS (default), IIS_4_0, IIS_5_0, IIS_5_1, IIS_6_0, - # IIS_7_0, IIS_7_5, Apache_2 - libhtp: - default-config: - personality: IDS - - # Can be specified in kb, mb, gb. Just a number indicates - # it's in bytes. - request-body-limit: 100kb - response-body-limit: 100kb - - # inspection limits - request-body-minimal-inspect-size: 32kb - request-body-inspect-window: 4kb - response-body-minimal-inspect-size: 40kb - response-body-inspect-window: 16kb - - # response body decompression (0 disables) - response-body-decompress-layer-limit: 2 - - # auto will use http-body-inline mode in IPS mode, yes or no set it statically - http-body-inline: auto - - # Decompress SWF files. - # Two types: 'deflate', 'lzma', 'both' will decompress deflate and lzma - # compress-depth: - # Specifies the maximum amount of data to decompress, - # set 0 for unlimited. - # decompress-depth: - # Specifies the maximum amount of decompressed data to obtain, - # set 0 for unlimited. - swf-decompression: - enabled: yes - type: both - compress-depth: 100kb - decompress-depth: 100kb - - # Use a random value for inspection sizes around the specified value. - # This lowers the risk of some evasion techniques but could lead - # to detection change between runs. It is set to 'yes' by default. - #randomize-inspection-sizes: yes - # If "randomize-inspection-sizes" is active, the value of various - # inspection size will be chosen from the [1 - range%, 1 + range%] - # range - # Default value of "randomize-inspection-range" is 10. - #randomize-inspection-range: 10 - - # decoding - double-decode-path: no - double-decode-query: no - - # Can enable LZMA decompression - #lzma-enabled: false - # Memory limit usage for LZMA decompression dictionary - # Data is decompressed until dictionary reaches this size - #lzma-memlimit: 1mb - # Maximum decompressed size with a compression ratio - # above 2048 (only LZMA can reach this ratio, deflate cannot) - #compression-bomb-limit: 1mb - # Maximum time spent decompressing a single transaction in usec - #decompression-time-limit: 100000 - - server-config: - - #- apache: - # address: [192.168.1.0/24, 127.0.0.0/8, "::1"] - # personality: Apache_2 - # # Can be specified in kb, mb, gb. Just a number indicates - # # it's in bytes. - # request-body-limit: 4096 - # response-body-limit: 4096 - # double-decode-path: no - # double-decode-query: no - - #- iis7: - # address: - # - 192.168.0.0/24 - # - 192.168.10.0/24 - # personality: IIS_7_0 - # # Can be specified in kb, mb, gb. Just a number indicates - # # it's in bytes. - # request-body-limit: 4096 - # response-body-limit: 4096 - # double-decode-path: no - # double-decode-query: no - - # Note: Modbus probe parser is minimalist due to the limited usage in the field. - # Only Modbus message length (greater than Modbus header length) - # and protocol ID (equal to 0) are checked in probing parser - # It is important to enable detection port and define Modbus port - # to avoid false positives - modbus: - # How many unanswered Modbus requests are considered a flood. - # If the limit is reached, the app-layer-event:modbus.flooded; will match. - #request-flood: 500 - - enabled: no - detection-ports: - dp: 502 - # According to MODBUS Messaging on TCP/IP Implementation Guide V1.0b, it - # is recommended to keep the TCP connection opened with a remote device - # and not to open and close it for each MODBUS/TCP transaction. In that - # case, it is important to set the depth of the stream reassembling as - # unlimited (stream.reassembly.depth: 0) - - # Stream reassembly size for modbus. By default track it completely. - stream-depth: 0 - - # DNP3 - dnp3: - enabled: no - detection-ports: - dp: 20000 - - # SCADA EtherNet/IP and CIP protocol support - enip: - enabled: no - detection-ports: - dp: 44818 - sp: 44818 - - ntp: - enabled: yes - - dhcp: - enabled: yes - - sip: - enabled: yes - -# Limit for the maximum number of asn1 frames to decode (default 256) -asn1-max-frames: 256 - -# Datasets default settings -# datasets: -# # Default fallback memcap and hashsize values for datasets in case these -# # were not explicitly defined. -# defaults: -# memcap: 100mb -# hashsize: 2048 - -############################################################################## -## -## Advanced settings below -## -############################################################################## - -## -## Run Options -## - -# Run Suricata with a specific user-id and group-id: -#run-as: -# user: suri -# group: suri - -# Some logging modules will use that name in event as identifier. The default -# value is the hostname -#sensor-name: suricata - -# Default location of the pid file. The pid file is only used in -# daemon mode (start Suricata with -D). If not running in daemon mode -# the --pidfile command line option must be used to create a pid file. -#pid-file: /var/run/suricata.pid - -# Daemon working directory -# Suricata will change directory to this one if provided -# Default: "/" -#daemon-directory: "/" - -# Umask. -# Suricata will use this umask if it is provided. By default it will use the -# umask passed on by the shell. -#umask: 022 - -# Suricata core dump configuration. Limits the size of the core dump file to -# approximately max-dump. The actual core dump size will be a multiple of the -# page size. Core dumps that would be larger than max-dump are truncated. On -# Linux, the actual core dump size may be a few pages larger than max-dump. -# Setting max-dump to 0 disables core dumping. -# Setting max-dump to 'unlimited' will give the full core dump file. -# On 32-bit Linux, a max-dump value >= ULONG_MAX may cause the core dump size -# to be 'unlimited'. - -coredump: - max-dump: unlimited - -# If the Suricata box is a router for the sniffed networks, set it to 'router'. If -# it is a pure sniffing setup, set it to 'sniffer-only'. -# If set to auto, the variable is internally switched to 'router' in IPS mode -# and 'sniffer-only' in IDS mode. -# This feature is currently only used by the reject* keywords. -host-mode: auto - -# Number of packets preallocated per thread. The default is 1024. A higher number -# will make sure each CPU will be more easily kept busy, but may negatively -# impact caching. -#max-pending-packets: 1024 - -# Runmode the engine should use. Please check --list-runmodes to get the available -# runmodes for each packet acquisition method. Default depends on selected capture -# method. 'workers' generally gives best performance. -#runmode: autofp - -# Specifies the kind of flow load balancer used by the flow pinned autofp mode. -# -# Supported schedulers are: -# -# hash - Flow assigned to threads using the 5-7 tuple hash. -# ippair - Flow assigned to threads using addresses only. -# -#autofp-scheduler: hash - -# Preallocated size for each packet. Default is 1514 which is the classical -# size for pcap on Ethernet. You should adjust this value to the highest -# packet size (MTU + hardware header) on your system. -#default-packet-size: 1514 - -# Unix command socket that can be used to pass commands to Suricata. -# An external tool can then connect to get information from Suricata -# or trigger some modifications of the engine. Set enabled to yes -# to activate the feature. In auto mode, the feature will only be -# activated in live capture mode. You can use the filename variable to set -# the file name of the socket. -unix-command: - enabled: yes - filename: /run/suricata/suricata.socket - -# Magic file. The extension .mgc is added to the value here. -#magic-file: /usr/share/file/magic -#magic-file: - -# GeoIP2 database file. Specify path and filename of GeoIP2 database -# if using rules with "geoip" rule option. -#geoip-database: /usr/local/share/GeoLite2/GeoLite2-Country.mmdb - -legacy: - uricontent: enabled - -## -## Detection settings -## - -# Set the order of alerts based on actions -# The default order is pass, drop, reject, alert -# action-order: -# - pass -# - drop -# - reject -# - alert - -# Define maximum number of possible alerts that can be triggered for the same -# packet. Default is 15 -#packet-alert-max: 15 - -# IP Reputation -#reputation-categories-file: /etc/suricata/iprep/categories.txt -#default-reputation-path: /etc/suricata/iprep -#reputation-files: -# - reputation.list - -# When run with the option --engine-analysis, the engine will read each of -# the parameters below, and print reports for each of the enabled sections -# and exit. The reports are printed to a file in the default log dir -# given by the parameter "default-log-dir", with engine reporting -# subsection below printing reports in its own report file. -engine-analysis: - # enables printing reports for fast-pattern for every rule. - rules-fast-pattern: yes - # enables printing reports for each rule - rules: yes - -#recursion and match limits for PCRE where supported -pcre: - match-limit: 3500 - match-limit-recursion: 1500 - -## -## Advanced Traffic Tracking and Reconstruction Settings -## - -# Host specific policies for defragmentation and TCP stream -# reassembly. The host OS lookup is done using a radix tree, just -# like a routing table so the most specific entry matches. -host-os-policy: - # Make the default policy windows. - windows: [0.0.0.0/0] - bsd: [] - bsd-right: [] - old-linux: [] - linux: [] - old-solaris: [] - solaris: [] - hpux10: [] - hpux11: [] - irix: [] - macos: [] - vista: [] - windows2k3: [] - -# Defrag settings: - -# The memcap-policy value can be "drop-flow", "pass-flow", "bypass", -# "drop-packet", "pass-packet", "reject" or "ignore" (which is the default). -defrag: - memcap: 32mb - # memcap-policy: ignore - hash-size: 65536 - trackers: 65535 # number of defragmented flows to follow - max-frags: 65535 # number of fragments to keep (higher than trackers) - prealloc: yes - timeout: 60 - -# Enable defrag per host settings -# host-config: -# -# - dmz: -# timeout: 30 -# address: [192.168.1.0/24, 127.0.0.0/8, 1.1.1.0/24, 2.2.2.0/24, "1.1.1.1", "2.2.2.2", "::1"] -# -# - lan: -# timeout: 45 -# address: -# - 192.168.0.0/24 -# - 192.168.10.0/24 -# - 172.16.14.0/24 - -# Flow settings: -# By default, the reserved memory (memcap) for flows is 32MB. This is the limit -# for flow allocation inside the engine. You can change this value to allow -# more memory usage for flows. -# The hash-size determines the size of the hash used to identify flows inside -# the engine, and by default the value is 65536. -# At startup, the engine can preallocate a number of flows, to get better -# performance. The number of flows preallocated is 10000 by default. -# emergency-recovery is the percentage of flows that the engine needs to -# prune before clearing the emergency state. The emergency state is activated -# when the memcap limit is reached, allowing new flows to be created, but -# pruning them with the emergency timeouts (they are defined below). -# If the memcap is reached, the engine will try to prune flows -# with the default timeouts. If it doesn't find a flow to prune, it will set -# the emergency bit and it will try again with more aggressive timeouts. -# If that doesn't work, then it will try to kill the oldest flows using -# last time seen flows. -# The memcap can be specified in kb, mb, gb. Just a number indicates it's -# in bytes. -# The memcap-policy can be "drop-flow", "pass-flow", "bypass", "drop-packet", -# "pass-packet", "reject" or "ignore" (which is the default). - -flow: - memcap: 128mb - #memcap-policy: ignore - hash-size: 65536 - prealloc: 10000 - emergency-recovery: 30 - #managers: 1 # default to one flow manager - #recyclers: 1 # default to one flow recycler thread - -# This option controls the use of VLAN ids in the flow (and defrag) -# hashing. Normally this should be enabled, but in some (broken) -# setups where both sides of a flow are not tagged with the same VLAN -# tag, we can ignore the VLAN id's in the flow hashing. -vlan: - use-for-tracking: true - -# Specific timeouts for flows. Here you can specify the timeouts that the -# active flows will wait to transit from the current state to another, on each -# protocol. The value of "new" determines the seconds to wait after a handshake or -# stream startup before the engine frees the data of that flow it doesn't -# change the state to established (usually if we don't receive more packets -# of that flow). The value of "established" is the amount of -# seconds that the engine will wait to free the flow if that time elapses -# without receiving new packets or closing the connection. "closed" is the -# amount of time to wait after a flow is closed (usually zero). "bypassed" -# timeout controls locally bypassed flows. For these flows we don't do any other -# tracking. If no packets have been seen after this timeout, the flow is discarded. -# -# There's an emergency mode that will become active under attack circumstances, -# making the engine to check flow status faster. This configuration variables -# use the prefix "emergency-" and work similar as the normal ones. -# Some timeouts doesn't apply to all the protocols, like "closed", for udp and -# icmp. - -flow-timeouts: - - default: - new: 30 - established: 300 - closed: 0 - bypassed: 100 - emergency-new: 10 - emergency-established: 100 - emergency-closed: 0 - emergency-bypassed: 50 - tcp: - new: 60 - established: 600 - closed: 60 - bypassed: 100 - emergency-new: 5 - emergency-established: 100 - emergency-closed: 10 - emergency-bypassed: 50 - udp: - new: 30 - established: 300 - bypassed: 100 - emergency-new: 10 - emergency-established: 100 - emergency-bypassed: 50 - icmp: - new: 30 - established: 300 - bypassed: 100 - emergency-new: 10 - emergency-established: 100 - emergency-bypassed: 50 - -# Stream engine settings. Here the TCP stream tracking and reassembly -# engine is configured. -# -# stream: -# memcap: 64mb # Can be specified in kb, mb, gb. Just a -# # number indicates it's in bytes. -# memcap-policy: ignore # Can be "drop-flow", "pass-flow", "bypass", -# # "drop-packet", "pass-packet", "reject" or -# # "ignore" default is "ignore" -# checksum-validation: yes # To validate the checksum of received -# # packet. If csum validation is specified as -# # "yes", then packets with invalid csum values will not -# # be processed by the engine stream/app layer. -# # Warning: locally generated traffic can be -# # generated without checksum due to hardware offload -# # of checksum. You can control the handling of checksum -# # on a per-interface basis via the 'checksum-checks' -# # option -# prealloc-sessions: 2k # 2k sessions prealloc'd per stream thread -# midstream: false # don't allow midstream session pickups -# midstream-policy: ignore # Can be "drop-flow", "pass-flow", "bypass", -# # "drop-packet", "pass-packet", "reject" or -# # "ignore" default is "ignore" -# async-oneside: false # don't enable async stream handling -# inline: no # stream inline mode -# drop-invalid: yes # in inline mode, drop packets that are invalid with regards to streaming engine -# max-synack-queued: 5 # Max different SYN/ACKs to queue -# bypass: no # Bypass packets when stream.reassembly.depth is reached. -# # Warning: first side to reach this triggers -# # the bypass. -# -# reassembly: -# memcap: 256mb # Can be specified in kb, mb, gb. Just a number -# # indicates it's in bytes. -# memcap-policy: ignore # Can be "drop-flow", "pass-flow", "bypass", -# # "drop-packet", "pass-packet", "reject" or -# # "ignore" default is "ignore" -# depth: 1mb # Can be specified in kb, mb, gb. Just a number -# # indicates it's in bytes. -# toserver-chunk-size: 2560 # inspect raw stream in chunks of at least -# # this size. Can be specified in kb, mb, -# # gb. Just a number indicates it's in bytes. -# toclient-chunk-size: 2560 # inspect raw stream in chunks of at least -# # this size. Can be specified in kb, mb, -# # gb. Just a number indicates it's in bytes. -# randomize-chunk-size: yes # Take a random value for chunk size around the specified value. -# # This lowers the risk of some evasion techniques but could lead -# # to detection change between runs. It is set to 'yes' by default. -# randomize-chunk-range: 10 # If randomize-chunk-size is active, the value of chunk-size is -# # a random value between (1 - randomize-chunk-range/100)*toserver-chunk-size -# # and (1 + randomize-chunk-range/100)*toserver-chunk-size and the same -# # calculation for toclient-chunk-size. -# # Default value of randomize-chunk-range is 10. -# -# raw: yes # 'Raw' reassembly enabled or disabled. -# # raw is for content inspection by detection -# # engine. -# -# segment-prealloc: 2048 # number of segments preallocated per thread -# -# check-overlap-different-data: true|false -# # check if a segment contains different data -# # than what we've already seen for that -# # position in the stream. -# # This is enabled automatically if inline mode -# # is used or when stream-event:reassembly_overlap_different_data; -# # is used in a rule. -# -stream: - memcap: 64mb - #memcap-policy: ignore - checksum-validation: yes # reject incorrect csums - #midstream: false - #midstream-policy: ignore - inline: auto # auto will use inline mode in IPS mode, yes or no set it statically - reassembly: - memcap: 256mb - #memcap-policy: ignore - depth: 1mb # reassemble 1mb into a stream - toserver-chunk-size: 2560 - toclient-chunk-size: 2560 - randomize-chunk-size: yes - #randomize-chunk-range: 10 - #raw: yes - #segment-prealloc: 2048 - #check-overlap-different-data: true - -# Host table: -# -# Host table is used by the tagging and per host thresholding subsystems. -# -host: - hash-size: 4096 - prealloc: 1000 - memcap: 32mb - -# IP Pair table: -# -# Used by xbits 'ippair' tracking. -# -#ippair: -# hash-size: 4096 -# prealloc: 1000 -# memcap: 32mb - -# Decoder settings - -decoder: - # Teredo decoder is known to not be completely accurate - # as it will sometimes detect non-teredo as teredo. - teredo: - enabled: true - # ports to look for Teredo. Max 4 ports. If no ports are given, or - # the value is set to 'any', Teredo detection runs on _all_ UDP packets. - ports: $TEREDO_PORTS # syntax: '[3544, 1234]' or '3533' or 'any'. - - # VXLAN decoder is assigned to up to 4 UDP ports. By default only the - # IANA assigned port 4789 is enabled. - vxlan: - enabled: true - ports: $VXLAN_PORTS # syntax: '[8472, 4789]' or '4789'. - - # VNTag decode support - vntag: - enabled: false - - # Geneve decoder is assigned to up to 4 UDP ports. By default only the - # IANA assigned port 6081 is enabled. - geneve: - enabled: true - ports: $GENEVE_PORTS # syntax: '[6081, 1234]' or '6081'. - - # maximum number of decoder layers for a packet - # max-layers: 16 - -## -## Performance tuning and profiling -## - -# The detection engine builds internal groups of signatures. The engine -# allows us to specify the profile to use for them, to manage memory in an -# efficient way keeping good performance. For the profile keyword you -# can use the words "low", "medium", "high" or "custom". If you use custom, -# make sure to define the values in the "custom-values" section. -# Usually you would prefer medium/high/low. -# -# "sgh mpm-context", indicates how the staging should allot mpm contexts for -# the signature groups. "single" indicates the use of a single context for -# all the signature group heads. "full" indicates a mpm-context for each -# group head. "auto" lets the engine decide the distribution of contexts -# based on the information the engine gathers on the patterns from each -# group head. -# -# The option inspection-recursion-limit is used to limit the recursive calls -# in the content inspection code. For certain payload-sig combinations, we -# might end up taking too much time in the content inspection code. -# If the argument specified is 0, the engine uses an internally defined -# default limit. When a value is not specified, there are no limits on the recursion. -detect: - profile: medium - custom-values: - toclient-groups: 3 - toserver-groups: 25 - sgh-mpm-context: auto - inspection-recursion-limit: 3000 - # If set to yes, the loading of signatures will be made after the capture - # is started. This will limit the downtime in IPS mode. - #delayed-detect: yes - - prefilter: - # default prefiltering setting. "mpm" only creates MPM/fast_pattern - # engines. "auto" also sets up prefilter engines for other keywords. - # Use --list-keywords=all to see which keywords support prefiltering. - default: mpm - - # the grouping values above control how many groups are created per - # direction. Port whitelisting forces that port to get its own group. - # Very common ports will benefit, as well as ports with many expensive - # rules. - grouping: - #tcp-whitelist: 53, 80, 139, 443, 445, 1433, 3306, 3389, 6666, 6667, 8080 - #udp-whitelist: 53, 135, 5060 - - profiling: - # Log the rules that made it past the prefilter stage, per packet - # default is off. The threshold setting determines how many rules - # must have made it past pre-filter for that rule to trigger the - # logging. - #inspect-logging-threshold: 200 - grouping: - dump-to-disk: false - include-rules: false # very verbose - include-mpm-stats: false - -# Select the multi pattern algorithm you want to run for scan/search the -# in the engine. -# -# The supported algorithms are: -# "ac" - Aho-Corasick, default implementation -# "ac-bs" - Aho-Corasick, reduced memory implementation -# "ac-ks" - Aho-Corasick, "Ken Steele" variant -# "hs" - Hyperscan, available when built with Hyperscan support -# -# The default mpm-algo value of "auto" will use "hs" if Hyperscan is -# available, "ac" otherwise. -# -# The mpm you choose also decides the distribution of mpm contexts for -# signature groups, specified by the conf - "detect.sgh-mpm-context". -# Selecting "ac" as the mpm would require "detect.sgh-mpm-context" -# to be set to "single", because of ac's memory requirements, unless the -# ruleset is small enough to fit in memory, in which case one can -# use "full" with "ac". The rest of the mpms can be run in "full" mode. - -mpm-algo: auto - -# Select the matching algorithm you want to use for single-pattern searches. -# -# Supported algorithms are "bm" (Boyer-Moore) and "hs" (Hyperscan, only -# available if Suricata has been built with Hyperscan support). -# -# The default of "auto" will use "hs" if available, otherwise "bm". - -spm-algo: auto - -# Suricata is multi-threaded. Here the threading can be influenced. -threading: - set-cpu-affinity: no - # Tune cpu affinity of threads. Each family of threads can be bound - # to specific CPUs. - # - # These 2 apply to the all runmodes: - # management-cpu-set is used for flow timeout handling, counters - # worker-cpu-set is used for 'worker' threads - # - # Additionally, for autofp these apply: - # receive-cpu-set is used for capture threads - # verdict-cpu-set is used for IPS verdict threads - # - cpu-affinity: - - management-cpu-set: - cpu: [ 0 ] # include only these CPUs in affinity settings - - receive-cpu-set: - cpu: [ 0 ] # include only these CPUs in affinity settings - - worker-cpu-set: - cpu: [ "all" ] - mode: "exclusive" - # Use explicitly 3 threads and don't compute number by using - # detect-thread-ratio variable: - # threads: 3 - prio: - low: [ 0 ] - medium: [ "1-2" ] - high: [ 3 ] - default: "medium" - #- verdict-cpu-set: - # cpu: [ 0 ] - # prio: - # default: "high" - # - # By default Suricata creates one "detect" thread per available CPU/CPU core. - # This setting allows controlling this behaviour. A ratio setting of 2 will - # create 2 detect threads for each CPU/CPU core. So for a dual core CPU this - # will result in 4 detect threads. If values below 1 are used, less threads - # are created. So on a dual core CPU a setting of 0.5 results in 1 detect - # thread being created. Regardless of the setting at a minimum 1 detect - # thread will always be created. - # - detect-thread-ratio: 1.0 - # - # By default, the per-thread stack size is left to its default setting. If - # the default thread stack size is too small, use the following configuration - # setting to change the size. Note that if any thread's stack size cannot be - # set to this value, a fatal error occurs. - # - # Generally, the per-thread stack-size should not exceed 8MB. - #stack-size: 8mb - -# Luajit has a strange memory requirement, its 'states' need to be in the -# first 2G of the process' memory. -# -# 'luajit.states' is used to control how many states are preallocated. -# State use: per detect script: 1 per detect thread. Per output script: 1 per -# script. -luajit: - states: 128 - -# Profiling settings. Only effective if Suricata has been built with -# the --enable-profiling configure flag. -# -profiling: - # Run profiling for every X-th packet. The default is 1, which means we - # profile every packet. If set to 1000, one packet is profiled for every - # 1000 received. - #sample-rate: 1000 - - # rule profiling - rules: - - # Profiling can be disabled here, but it will still have a - # performance impact if compiled in. - enabled: yes - filename: rule_perf.log - append: yes - - # Sort options: ticks, avgticks, checks, matches, maxticks - # If commented out all the sort options will be used. - #sort: avgticks - - # Limit the number of sids for which stats are shown at exit (per sort). - limit: 10 - - # output to json - json: yes - - # per keyword profiling - keywords: - enabled: yes - filename: keyword_perf.log - append: yes - - prefilter: - enabled: yes - filename: prefilter_perf.log - append: yes - - # per rulegroup profiling - rulegroups: - enabled: yes - filename: rule_group_perf.log - append: yes - - # packet profiling - packets: - - # Profiling can be disabled here, but it will still have a - # performance impact if compiled in. - enabled: yes - filename: packet_stats.log - append: yes - - # per packet csv output - csv: - - # Output can be disabled here, but it will still have a - # performance impact if compiled in. - enabled: no - filename: packet_stats.csv - - # profiling of locking. Only available when Suricata was built with - # --enable-profiling-locks. - locks: - enabled: no - filename: lock_stats.log - append: yes - - pcap-log: - enabled: no - filename: pcaplog_stats.log - append: yes - -## -## Netfilter integration -## - -# When running in NFQ inline mode, it is possible to use a simulated -# non-terminal NFQUEUE verdict. -# This permits sending all needed packet to Suricata via this rule: -# iptables -I FORWARD -m mark ! --mark $MARK/$MASK -j NFQUEUE -# And below, you can have your standard filtering ruleset. To activate -# this mode, you need to set mode to 'repeat' -# If you want a packet to be sent to another queue after an ACCEPT decision -# set the mode to 'route' and set next-queue value. -# On Linux >= 3.1, you can set batchcount to a value > 1 to improve performance -# by processing several packets before sending a verdict (worker runmode only). -# On Linux >= 3.6, you can set the fail-open option to yes to have the kernel -# accept the packet if Suricata is not able to keep pace. -# bypass mark and mask can be used to implement NFQ bypass. If bypass mark is -# set then the NFQ bypass is activated. Suricata will set the bypass mark/mask -# on packet of a flow that need to be bypassed. The Nefilter ruleset has to -# directly accept all packets of a flow once a packet has been marked. -nfq: -# mode: accept -# repeat-mark: 1 -# repeat-mask: 1 -# bypass-mark: 1 -# bypass-mask: 1 -# route-queue: 2 -# batchcount: 20 -# fail-open: yes - -#nflog support -nflog: - # netlink multicast group - # (the same as the iptables --nflog-group param) - # Group 0 is used by the kernel, so you can't use it - - group: 2 - # netlink buffer size - buffer-size: 18432 - # put default value here - - group: default - # set number of packets to queue inside kernel - qthreshold: 1 - # set the delay before flushing packet in the kernel's queue - qtimeout: 100 - # netlink max buffer size - max-size: 20000 - -## -## Advanced Capture Options -## - -# General settings affecting packet capture -capture: - # disable NIC offloading. It's restored when Suricata exits. - # Enabled by default. - #disable-offloading: false - # - # disable checksum validation. Same as setting '-k none' on the - # commandline. - #checksum-validation: none - -# Netmap support -# -# Netmap operates with NIC directly in driver, so you need FreeBSD 11+ which has -# built-in Netmap support or compile and install the Netmap module and appropriate -# NIC driver for your Linux system. -# To reach maximum throughput disable all receive-, segmentation-, -# checksum- offloading on your NIC (using ethtool or similar). -# Disabling TX checksum offloading is *required* for connecting OS endpoint -# with NIC endpoint. -# You can find more information at https://github.com/luigirizzo/netmap -# -netmap: - - interface: default - -# PF_RING configuration: for use with native PF_RING support -# for more info see http://www.ntop.org/products/pf_ring/ -pfring: - - interface: default - #threads: 2 - -# For FreeBSD ipfw(8) divert(4) support. -# Please make sure you have ipfw_load="YES" and ipdivert_load="YES" -# in /etc/loader.conf or kldload'ing the appropriate kernel modules. -# Additionally, you need to have an ipfw rule for the engine to see -# the packets from ipfw. For Example: -# -# ipfw add 100 divert 8000 ip from any to any -# -# N.B. This example uses "8000" -- this number must mach the values -# you passed on the command line, i.e., -d 8000 -# -ipfw: - - # Reinject packets at the specified ipfw rule number. This config - # option is the ipfw rule number AT WHICH rule processing continues - # in the ipfw processing system after the engine has finished - # inspecting the packet for acceptance. If no rule number is specified, - # accepted packets are reinjected at the divert rule which they entered - # and IPFW rule processing continues. No check is done to verify - # this will rule makes sense so care must be taken to avoid loops in ipfw. - # - ## The following example tells the engine to reinject packets - # back into the ipfw firewall AT rule number 5500: - # - # ipfw-reinjection-rule-number: 5500 - - -napatech: - # When use_all_streams is set to "yes" the initialization code will query - # the Napatech service for all configured streams and listen on all of them. - # When set to "no" the streams config array will be used. - # - # This option necessitates running the appropriate NTPL commands to create - # the desired streams prior to running Suricata. - #use-all-streams: no - - # The streams to listen on when auto-config is disabled or when and threading - # cpu-affinity is disabled. This can be either: - # an individual stream (e.g. streams: [0]) - # or - # a range of streams (e.g. streams: ["0-3"]) - # - streams: ["0-3"] - - # Stream stats can be enabled to provide fine grain packet and byte counters - # for each thread/stream that is configured. - # - enable-stream-stats: no - - # When auto-config is enabled the streams will be created and assigned - # automatically to the NUMA node where the thread resides. If cpu-affinity - # is enabled in the threading section. Then the streams will be created - # according to the number of worker threads specified in the worker-cpu-set. - # Otherwise, the streams array is used to define the streams. - # - # This option is intended primarily to support legacy configurations. - # - # This option cannot be used simultaneously with either "use-all-streams" - # or "hardware-bypass". - # - auto-config: yes - - # Enable hardware level flow bypass. - # - hardware-bypass: yes - - # Enable inline operation. When enabled traffic arriving on a given port is - # automatically forwarded out its peer port after analysis by Suricata. - # - inline: no - - # Ports indicates which Napatech ports are to be used in auto-config mode. - # these are the port IDs of the ports that will be merged prior to the - # traffic being distributed to the streams. - # - # When hardware-bypass is enabled the ports must be configured as a segment. - # specify the port(s) on which upstream and downstream traffic will arrive. - # This information is necessary for the hardware to properly process flows. - # - # When using a tap configuration one of the ports will receive inbound traffic - # for the network and the other will receive outbound traffic. The two ports on a - # given segment must reside on the same network adapter. - # - # When using a SPAN-port configuration the upstream and downstream traffic - # arrives on a single port. This is configured by setting the two sides of the - # segment to reference the same port. (e.g. 0-0 to configure a SPAN port on - # port 0). - # - # port segments are specified in the form: - # ports: [0-1,2-3,4-5,6-6,7-7] - # - # For legacy systems when hardware-bypass is disabled this can be specified in any - # of the following ways: - # - # a list of individual ports (e.g. ports: [0,1,2,3]) - # - # a range of ports (e.g. ports: [0-3]) - # - # "all" to indicate that all ports are to be merged together - # (e.g. ports: [all]) - # - # This parameter has no effect if auto-config is disabled. - # - ports: [0-1,2-3] - - # When auto-config is enabled the hashmode specifies the algorithm for - # determining to which stream a given packet is to be delivered. - # This can be any valid Napatech NTPL hashmode command. - # - # The most common hashmode commands are: hash2tuple, hash2tuplesorted, - # hash5tuple, hash5tuplesorted and roundrobin. - # - # See Napatech NTPL documentation other hashmodes and details on their use. - # - # This parameter has no effect if auto-config is disabled. - # - hashmode: hash5tuplesorted - -## -## Configure Suricata to load Suricata-Update managed rules. -## - -# As VyOS leverages suricata-update, the default rule path points to the -# generated rules instead of the built-in rules. -# -# default-rule-path: /etc/suricata/rules -default-rule-path: /var/lib/suricata/rules - -rule-files: - - suricata.rules - -## -## Auxiliary configuration files. -## - -# As VyOS leverages suricata-update, the classification file points to the -# generated classification instead of the built-in one. -# -# classification-file: /etc/suricata/classification.config -classification-file: /var/lib/suricata/rules/classification.config -reference-config-file: /etc/suricata/reference.config -# threshold-file: /etc/suricata/threshold.config - -## -## Include other configs -## - -# Includes: Files included here will be handled as if they were in-lined -# in this configuration file. Files with relative pathnames will be -# searched for in the same directory as this configuration file. You may -# use absolute pathnames too. -# You can specify more than 2 configuration files, if needed. -#include: include1.yaml -#include: include2.yaml diff --git a/data/templates/ids/suricata_logrotate.j2 b/data/templates/ids/suricata_logrotate.j2 deleted file mode 100644 index 62773fc68..000000000 --- a/data/templates/ids/suricata_logrotate.j2 +++ /dev/null @@ -1,17 +0,0 @@ -{% for filename in [(log.eve.filename | default("eve.json"))] %} -{{ filename if filename.startswith("/") else ("/var/log/suricata/" + filename) }} -{% endfor %}{ - weekly - dateext - dateformat _%Y-%m-%d_%H-%M-%S - maxsize 10M - rotate 10 - missingok - nocompress - nocreate - nomail - sharedscripts - postrotate - /bin/kill -HUP `cat /run/suricata/suricata.pid 2>/dev/null` 2>/dev/null || true - endscript -} diff --git a/debian/control b/debian/control index 2e99bdc28..329ed09eb 100644 --- a/debian/control +++ b/debian/control @@ -164,8 +164,6 @@ Depends: # End "service dns dynamic" # # For "service ids" fastnetmon [amd64], - suricata, - suricata-update, # End "service ids" # # For "service ndp-proxy" ndppd, diff --git a/interface-definitions/service_suricata.xml.in b/interface-definitions/service_suricata.xml.in deleted file mode 100644 index e0159e2ba..000000000 --- a/interface-definitions/service_suricata.xml.in +++ /dev/null @@ -1,238 +0,0 @@ - - - - - - - Network IDS, IPS and Security Monitoring - 740 - - - #include - - - Address group name - - [a-z0-9-]+ - - - - - - IP address or subnet - - ipv4 - IPv4 address to match - - - ipv6 - IPv6 address to match - - - ipv4net - IPv4 prefix to match - - - ipv6net - IPv6 prefix to match - - - !ipv4 - Exclude the specified IPv4 address from matches - - - !ipv6 - Exclude the specified IPv6 address from matches - - - !ipv4net - Exclude the specified IPv6 prefix from matches - - - !ipv6net - Exclude the specified IPv6 prefix from matches - - - - - - - - - - - - - - - - - Address group - - service ids suricata address-group - - - txt - Address group to match - - - !txt - Exclude the specified address group from matches - - - !?[a-z0-9-]+ - - - - - - - - - Port group name - - [a-z0-9-]+ - - - - - - Port number - - u32:1-65535 - Numeric port to match - - - !u32:1-65535 - Numeric port to exclude from matches - - - start-end - Numbered port range (e.g. 1001-1005) to match - - - !start-end - Numbered port range (e.g. !1001-1005) to exclude from matches - - - - - - - - - - - Port group - - service ids suricata port-group - - - txt - Port group to match - - - !txt - Exclude the specified port group from matches - - - !?[a-z0-9-]+ - - - - - - - - - Suricata log outputs - - - - - Extensible Event Format (EVE) - - - - - EVE logging destination - - regular syslog - - - regular - Log to filename - - - syslog - Log to syslog - - - (regular|syslog) - - - regular - - - - Log file - - filename - File name in default Suricata log directory - - - /path - Absolute file path - - - eve.json - - - - Log types - - alert anomaly drop files http dns tls smtp dnp3 ftp rdp nfs smb tftp ikev2 dcerpc krb5 snmp rfb sip dhcp ssh mqtt http2 flow netflow - - - alert - Record events for rule matches - - - anomaly - Record unexpected conditions such as truncated packets, packets with invalid IP/UDP/TCP length values, and other events that render the packet invalid for further processing or describe unexpected behavior on an established stream - - - drop - Record events for dropped packets - - - file - Record file details (e.g., MD5) for files extracted from application protocols (e.g., HTTP) - - - application (http, dns, tls, ...) - Record application-level transactions - - - flow - Record bi-directional flows - - - netflow - Record uni-directional flows - - - (alert|anomaly|http|dns|tls|files|drop|smtp|dnp3|ftp|rdp|nfs|smb|tftp|ikev2|dcerpc|krb5|snmp|rfb|sip|dhcp|ssh|mqtt|http2|flow|netflow) - - - - - - - - - - - - - diff --git a/op-mode-definitions/suricata.xml.in b/op-mode-definitions/suricata.xml.in deleted file mode 100644 index a5025afba..000000000 --- a/op-mode-definitions/suricata.xml.in +++ /dev/null @@ -1,23 +0,0 @@ - - - - - - - Update Suricata - - if test -f /run/suricata/suricata.yaml; then sudo suricata-update --suricata-conf /run/suricata/suricata.yaml; sudo systemctl restart suricata; else echo "Service Suricata not configured"; fi - - - - - - - - Restart Suricata service - - if systemctl is-active --quiet suricata; then sudo systemctl restart suricata.service; else echo "Service Suricata not configured"; fi - - - - diff --git a/src/conf_mode/service_suricata.py b/src/conf_mode/service_suricata.py deleted file mode 100755 index 69b369e0b..000000000 --- a/src/conf_mode/service_suricata.py +++ /dev/null @@ -1,161 +0,0 @@ -#!/usr/bin/env python3 -# -# Copyright (C) 2024 VyOS maintainers and contributors -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License version 2 or later as -# published by the Free Software Foundation. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -import os - -from sys import exit - -from vyos.base import Warning -from vyos.config import Config -from vyos.template import render -from vyos.utils.process import call -from vyos import ConfigError -from vyos import airbag -airbag.enable() - -config_file = '/run/suricata/suricata.yaml' -rotate_file = '/etc/logrotate.d/suricata' - -def get_config(config=None): - if config: - conf = config - else: - conf = Config() - base = ['service', 'suricata'] - - if not conf.exists(base): - return None - - suricata = conf.get_config_dict(base, key_mangling=('-', '_'), - get_first_key=True, with_recursive_defaults=True) - - return suricata - -# https://en.wikipedia.org/wiki/Topological_sorting#Depth-first_search -def topological_sort(source): - sorted_nodes = [] - permanent_marks = set() - temporary_marks = set() - - def visit(n, v): - if n in permanent_marks: - return - if n in temporary_marks: - raise ConfigError('At least one cycle exists in the referenced groups') - - temporary_marks.add(n) - - for m in v.get('group', []): - m = m.lstrip('!') - if m not in source: - raise ConfigError(f'Undefined referenced group "{m}"') - visit(m, source[m]) - - temporary_marks.remove(n) - permanent_marks.add(n) - sorted_nodes.append((n, v)) - - while len(permanent_marks) < len(source): - n = next(n for n in source.keys() if n not in permanent_marks) - visit(n, source[n]) - - return sorted_nodes - -def verify(suricata): - if not suricata: - return None - - if 'interface' not in suricata: - raise ConfigError('No interfaces configured!') - - if 'address_group' not in suricata: - raise ConfigError('No address-group configured!') - - if 'port_group' not in suricata: - raise ConfigError('No port-group configured!') - - try: - topological_sort(suricata['address_group']) - except (ConfigError,StopIteration) as e: - raise ConfigError(f'Invalid address-group: {e}') - - try: - topological_sort(suricata['port_group']) - except (ConfigError,StopIteration) as e: - raise ConfigError(f'Invalid port-group: {e}') - -def generate(suricata): - if not suricata: - for file in [config_file, rotate_file]: - if os.path.isfile(file): - os.unlink(file) - - return None - - # Config-related formatters - def to_var(s:str): - return s.replace('-','_').upper() - - def to_val(s:str): - return s.replace('-',':') - - def to_ref(s:str): - if s[0] == '!': - return '!$' + to_var(s[1:]) - return '$' + to_var(s) - - def to_config(kind:str): - def format_group(group): - (name, value) = group - property = [to_val(property) for property in value.get(kind,[])] - group = [to_ref(group) for group in value.get('group',[])] - return (to_var(name), property + group) - return format_group - - # Format the address group - suricata['address_group'] = map(to_config('address'), - topological_sort(suricata['address_group'])) - - # Format the port group - suricata['port_group'] = map(to_config('port'), - topological_sort(suricata['port_group'])) - - render(config_file, 'ids/suricata.j2', {'suricata': suricata}) - render(rotate_file, 'ids/suricata_logrotate.j2', suricata) - return None - -def apply(suricata): - systemd_service = 'suricata.service' - if not suricata or 'interface' not in suricata: - # Stop suricata service if removed - call(f'systemctl stop {systemd_service}') - else: - Warning('To fetch the latest rules, use "update suricata"; ' - 'To periodically fetch the latest rules, ' - 'use the task scheduler!') - call(f'systemctl restart {systemd_service}') - - return None - -if __name__ == '__main__': - try: - c = get_config() - verify(c) - generate(c) - apply(c) - except ConfigError as e: - print(e) - exit(1) diff --git a/src/etc/systemd/system/suricata.service.d/10-override.conf b/src/etc/systemd/system/suricata.service.d/10-override.conf deleted file mode 100644 index 781256cf5..000000000 --- a/src/etc/systemd/system/suricata.service.d/10-override.conf +++ /dev/null @@ -1,9 +0,0 @@ -[Service] -ExecStart= -ExecStart=/usr/bin/suricata -D --af-packet -c /run/suricata/suricata.yaml --pidfile /run/suricata/suricata.pid -PIDFile= -PIDFile=/run/suricata/suricata.pid -ExecReload= -ExecReload=/usr/bin/suricatasc -c reload-rules /run/suricata/suricata.socket ; /bin/kill -HUP $MAINPID -ExecStop= -ExecStop=/usr/bin/suricatasc -c shutdown /run/suricata/suricata.socket -- cgit v1.2.3