From b050fe61956f710e61d8e3a8139c971a23e702f9 Mon Sep 17 00:00:00 2001
From: Christian Poessinger <christian@poessinger.com>
Date: Wed, 1 May 2019 22:08:21 +0200
Subject: igmpproxy: remove init script which is already provided by Debian
Buster
---
src/etc/init.d/igmpproxy | 166 -----------------------------------------------
1 file changed, 166 deletions(-)
delete mode 100755 src/etc/init.d/igmpproxy
diff --git a/src/etc/init.d/igmpproxy b/src/etc/init.d/igmpproxy
deleted file mode 100755
index 4a2c94a4d..000000000
--- a/src/etc/init.d/igmpproxy
+++ /dev/null
@@ -1,166 +0,0 @@
-#!/bin/sh
-### BEGIN INIT INFO
-# Provides: igmpproxy
-# Required-Start: $local_fs $network $remote_fs $syslog
-# Required-Stop: $local_fs $network $remote_fs $syslog
-# Default-Start: 2 3 4 5
-# Default-Stop: 0 1 6
-# Short-Description: IGMP multicast routing daemon
-# Description: IGMPproxy is a simple dynamic Multicast Routing Daemon
-# using only IGMP signalling. It's intended for simple
-# forwarding of Multicast traffic between networks.
-### END INIT INFO
-
-# Author: Pali Rohár <pali.rohar@gmail.com>
-
-# Do NOT "set -e"
-
-# PATH should only include /usr/* if it runs after the mountnfs.sh script
-PATH=/sbin:/usr/sbin:/bin:/usr/bin
-DESC="igmpproxy"
-NAME=igmpproxy
-DAEMON=/sbin/igmpproxy
-DAEMON_ARGS="/etc/igmpproxy.conf"
-PIDFILE=/var/run/$NAME.pid
-SCRIPTNAME=/etc/init.d/$NAME
-
-# Exit if the package is not installed
-[ -x "$DAEMON" ] || exit 0
-
-# Read configuration variable file if it is present
-[ -r /etc/default/$NAME ] && . /etc/default/$NAME
-
-# Load the VERBOSE setting and other rcS variables
-. /lib/init/vars.sh
-
-# Define LSB log_* functions.
-# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
-# and status_of_proc is working.
-. /lib/lsb/init-functions
-
-#
-# Function that starts the daemon/service
-#
-do_start()
-{
- # Return
- # 0 if daemon has been started
- # 1 if daemon was already running
- # 2 if daemon could not be started
- start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
- || return 1
- start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -b -m -- \
- $DAEMON_OPTS $DAEMON_ARGS \
- || return 2
- # The above code will not work for interpreted scripts, use the next
- # six lines below instead (Ref: #643337, start-stop-daemon(8) )
- #start-stop-daemon --start --quiet --pidfile $PIDFILE --startas $DAEMON \
- # --name $NAME --test > /dev/null \
- # || return 1
- #start-stop-daemon --start --quiet --pidfile $PIDFILE --startas $DAEMON \
- # --name $NAME -- $DAEMON_ARGS \
- # || return 2
-
- # Add code here, if necessary, that waits for the process to be ready
- # to handle requests from services started subsequently which depend
- # on this one. As a last resort, sleep for some time.
-}
-
-#
-# Function that stops the daemon/service
-#
-do_stop()
-{
- # Return
- # 0 if daemon has been stopped
- # 1 if daemon was already stopped
- # 2 if daemon could not be stopped
- # other if a failure occurred
- start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
- RETVAL="$?"
- [ "$RETVAL" = 2 ] && return 2
- # Wait for children to finish too if this is a daemon that forks
- # and if the daemon is only ever run from this initscript.
- # If the above conditions are not satisfied then add some other code
- # that waits for the process to drop all resources that could be
- # needed by services started subsequently. A last resort is to
- # sleep for some time.
- start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
- [ "$?" = 2 ] && return 2
- # Many daemons don't delete their pidfiles when they exit.
- rm -f $PIDFILE
- return "$RETVAL"
-}
-
-#
-# Function that sends a SIGHUP to the daemon/service
-#
-do_reload() {
- #
- # If the daemon can reload its configuration without
- # restarting (for example, when it is sent a SIGHUP),
- # then implement that here.
- #
- start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
- return 0
-}
-
-case "$1" in
- start)
- [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME"
- do_start
- case "$?" in
- 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
- 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
- esac
- ;;
- stop)
- [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
- do_stop
- case "$?" in
- 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
- 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
- esac
- ;;
- status)
- status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
- ;;
- #reload|force-reload)
- #
- # If do_reload() is not implemented then leave this commented out
- # and leave 'force-reload' as an alias for 'restart'.
- #
- #log_daemon_msg "Reloading $DESC" "$NAME"
- #do_reload
- #log_end_msg $?
- #;;
- restart|force-reload)
- #
- # If the "reload" option is implemented then remove the
- # 'force-reload' alias
- #
- log_daemon_msg "Restarting $DESC" "$NAME"
- do_stop
- case "$?" in
- 0|1)
- do_start
- case "$?" in
- 0) log_end_msg 0 ;;
- 1) log_end_msg 1 ;; # Old process is still running
- *) log_end_msg 1 ;; # Failed to start
- esac
- ;;
- *)
- # Failed to stop
- log_end_msg 1
- ;;
- esac
- ;;
- *)
- #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
- echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
- exit 3
- ;;
-esac
-
-:
--
cgit v1.2.3