From f79646e08b2158e4b792c2e98997a72a73a75f10 Mon Sep 17 00:00:00 2001 From: Christian Poessinger Date: Thu, 11 Jun 2020 23:15:10 +0200 Subject: wwan: T2586: fix installing VRF default route After commit 1c7d7cb ("wwan: T2529: migrate device from ttyUSB to usbXbY.YpZ.Z") the up/down scripts did not properly parse the passed tty for setting up default routes. --- data/templates/wwan/ip-down.script.tmpl | 23 ++++++++++++----------- data/templates/wwan/ip-up.script.tmpl | 22 +++++++++++----------- 2 files changed, 23 insertions(+), 22 deletions(-) (limited to 'data/templates/wwan') diff --git a/data/templates/wwan/ip-down.script.tmpl b/data/templates/wwan/ip-down.script.tmpl index 194f8d863..f7b38cbc5 100644 --- a/data/templates/wwan/ip-down.script.tmpl +++ b/data/templates/wwan/ip-down.script.tmpl @@ -1,26 +1,27 @@ #!/bin/sh -tty=$2 +# Script parameters will be like: +# wlm0 /dev/serial/by-bus/usb0b1.3p1.3 115200 10.100.118.91 10.64.64.64 wlm0 # Only applicable for Wireless Modems (WWAN) -if [ -z "$(echo $tty | egrep "tty(USB|ACM)")" ]; then +if [ -z $(echo $2 | egrep "(ttyS[0-9]+|usb[0-9]+b.*)$") ]; then exit 0 fi -# Determine if we are enslaved to a VRF, this is needed to properly insert -# the default route -VRF_NAME="" +# Determine if we are running inside a VRF or not, required for proper routing table +# NOTE: the down script can not be properly templated as we need the VRF name, +# which is not present on deletion, thus we read it from the operating system. if [ -d /sys/class/net/{{ intf }}/upper_* ]; then # Determine upper (VRF) interface VRF=$(basename $(ls -d /sys/class/net/{{ intf }}/upper_*)) # Remove upper_ prefix from result string - VRF=${VRF#"upper_"} - # Populate variable to run in VR context - VRF_NAME=" -c vrf ${VRF_NAME} " + VRF_NAME=${VRF#"upper_"} + # Remove default route from VRF routing table + vtysh -c "conf t" -c "vrf ${VRF_NAME}" -c "no ip route 0.0.0.0/0 {{ intf }}" +else + # Remove default route from GRT (global routing table) + vtysh -c "conf t" -c "no ip route 0.0.0.0/0 {{ intf }}" fi -# Remove default route to either default or VRF routing table -vtysh -c "conf t" ${VRF_NAME} -c "no ip route 0.0.0.0/0 {{ intf }} {{ metric }}" - DIALER_PID=$(cat /var/run/{{ intf }}.pid) logger -t pppd[$DIALER_PID] "removed default route via {{ intf }} metric {{ metric }}" diff --git a/data/templates/wwan/ip-up.script.tmpl b/data/templates/wwan/ip-up.script.tmpl index 89e42a23a..3a7eec800 100644 --- a/data/templates/wwan/ip-up.script.tmpl +++ b/data/templates/wwan/ip-up.script.tmpl @@ -1,25 +1,25 @@ #!/bin/sh -tty=$2 +# Script parameters will be like: +# wlm0 /dev/serial/by-bus/usb0b1.3p1.3 115200 10.100.118.91 10.64.64.64 wlm0 # Only applicable for Wireless Modems (WWAN) -if [ -z "$(echo $tty | egrep "tty(USB|ACM)")" ]; then +if [ -z $(echo $2 | egrep "(ttyS[0-9]+|usb[0-9]+b.*)$") ]; then exit 0 fi -DIALER_PID=$(cat /var/run/{{ intf }}.pid) - -# Determine if we are enslaved to a VRF, this is needed to properly insert -# the default route -VRF_NAME="" +# Determine if we are running inside a VRF or not, required for proper routing table if [ -d /sys/class/net/{{ intf }}/upper_* ]; then # Determine upper (VRF) interface VRF=$(basename $(ls -d /sys/class/net/{{ intf }}/upper_*)) # Remove upper_ prefix from result string - VRF=${VRF#"upper_"} - VRF_NAME="vrf ${VRF}" + VRF_NAME=${VRF#"upper_"} + # Remove default route from VRF routing table + vtysh -c "conf t" -c "vrf ${VRF_NAME}" -c "ip route 0.0.0.0/0 {{ intf }} {{ metric }}" +else + # Remove default route from GRT (global routing table) + vtysh -c "conf t" -c "ip route 0.0.0.0/0 {{ intf }} {{ metric }}" fi -# Apply default route to either default or VRF routing table -vtysh -c "conf t" -c "ip route 0.0.0.0/0 {{ intf }} ${VRF_NAME} {{ metric }}" +DIALER_PID=$(cat /var/run/{{ intf }}.pid) logger -t pppd[$DIALER_PID] "added default route via {{ intf }} metric {{ metric }} ${VRF_NAME}" -- cgit v1.2.3