From 6635d8822a42cffcb4df9a44d87a0c4fb79ef698 Mon Sep 17 00:00:00 2001 From: Christian Poessinger Date: Mon, 21 Sep 2020 17:31:26 +0200 Subject: wireless: T2887: hostapd: add bridge option --- data/templates/wifi/hostapd.conf.tmpl | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'data') diff --git a/data/templates/wifi/hostapd.conf.tmpl b/data/templates/wifi/hostapd.conf.tmpl index 132c4ce40..3980fb896 100644 --- a/data/templates/wifi/hostapd.conf.tmpl +++ b/data/templates/wifi/hostapd.conf.tmpl @@ -11,6 +11,21 @@ device_name={{ description | truncate(32, True) }} # command line parameter. interface={{ ifname }} +{% if is_bridge_member is defined %} +# In case of atheros and nl80211 driver interfaces, an additional +# configuration parameter, bridge, may be used to notify hostapd if the +# interface is included in a bridge. This parameter is not used with Host AP +# driver. If the bridge parameter is not set, the drivers will automatically +# figure out the bridge interface (assuming sysfs is enabled and mounted to +# /sys) and this parameter may not be needed. +# +# For nl80211, this parameter can be used to request the AP interface to be +# added to the bridge automatically (brctl may refuse to do this before hostapd +# has been started to change the interface mode). If needed, the bridge +# interface is also created. +bridge={{ is_bridge_member }} +{% endif %} + # Driver interface type (hostap/wired/none/nl80211/bsd); # default: hostap). nl80211 is used with all Linux mac80211 drivers. # Use driver=none if building hostapd as a standalone RADIUS server that does -- cgit v1.2.3