From b082a6fb211ef19d75c4c81414be9aa1b9248b45 Mon Sep 17 00:00:00 2001 From: Christian Poessinger Date: Thu, 13 Aug 2020 18:31:08 +0200 Subject: lcd: T2564: flatten CLI interface * set system lcd device * set system lcd model Both device and model have completion helpers for supported interfaces and LCD displays. --- data/templates/lcd/LCDd.conf.tmpl | 126 ++ data/templates/lcd/lcdproc.conf.tmpl | 60 + data/templates/system-display/LCDd.conf.tmpl | 1500 ----------------------- data/templates/system-display/lcdproc.conf.tmpl | 173 --- 4 files changed, 186 insertions(+), 1673 deletions(-) create mode 100644 data/templates/lcd/LCDd.conf.tmpl create mode 100644 data/templates/lcd/lcdproc.conf.tmpl delete mode 100644 data/templates/system-display/LCDd.conf.tmpl delete mode 100644 data/templates/system-display/lcdproc.conf.tmpl (limited to 'data') diff --git a/data/templates/lcd/LCDd.conf.tmpl b/data/templates/lcd/LCDd.conf.tmpl new file mode 100644 index 000000000..da749d04a --- /dev/null +++ b/data/templates/lcd/LCDd.conf.tmpl @@ -0,0 +1,126 @@ +### Autogenerted by system-display.py ## + +# LCDd.conf -- configuration file for the LCDproc server daemon LCDd +# +# This file contains the configuration for the LCDd server. +# +# The format is ini-file-like. It is divided into sections that start at +# markers that look like [section]. Comments are all line-based comments, +# and are lines that start with '#' or ';'. +# +# The server has a 'central' section named [server]. For the menu there is +# a section called [menu]. Further each driver has a section which +# defines how the driver acts. +# +# The drivers are activated by specifying them in a driver= line in the +# server section, like: +# +# Driver=curses +# +# This tells LCDd to use the curses driver. +# The first driver that is loaded and is capable of output defines the +# size of the display. The default driver to use is curses. +# If the driver is specified using the -d command line option, +# the Driver= options in the config file are ignored. +# +# The drivers read their own options from the respective sections. + +## Server section with all kinds of settings for the LCDd server ## +[server] + +# Where can we find the driver modules ? +# NOTE: Always place a slash as last character ! +DriverPath=/usr/lib/x86_64-linux-gnu/lcdproc/ + +# Tells the server to load the given drivers. Multiple lines can be given. +# The name of the driver is case sensitive and determines the section +# where to look for further configuration options of the specific driver +# as well as the name of the dynamic driver module to load at runtime. +# The latter one can be changed by giving a File= directive in the +# driver specific section. +# +# The following drivers are supported: +# bayrad, CFontz, CFontzPacket, curses, CwLnx, ea65, EyeboxOne, futaba, +# g15, glcd, glcdlib, glk, hd44780, icp_a106, imon, imonlcd,, IOWarrior, +# irman, joy, lb216, lcdm001, lcterm, linux_input, lirc, lis, MD8800, +# mdm166a, ms6931, mtc_s16209x, MtxOrb, mx5000, NoritakeVFD, +# Olimex_MOD_LCD1x9, picolcd, pyramid, rawserial, sdeclcd, sed1330, +# sed1520, serialPOS, serialVFD, shuttleVFD, sli, stv5730, svga, t6963, +# text, tyan, ula200, vlsys_m428, xosd, yard2LCD + +{% if model is defined and model.startswith('CFA-') %} +Driver=CFontzPacket +{% endif %} + +# Tells the driver to bind to the given interface. [default: 127.0.0.1] +Bind=127.0.0.1 + +# Listen on this specified port. [default: 13666] +Port=13666 + +# Sets the reporting level; defaults to warnings and errors only. +# [default: 2; legal: 0-5] +ReportLevel=3 + +# Should we report to syslog instead of stderr? [default: no; legal: yes, no] +ReportToSyslog=yes + +# User to run as. LCDd will drop its root privileges and run as this user +# instead. [default: nobody] +User=nobody + +# The server will stay in the foreground if set to yes. +# [default: no, legal: yes, no] +Foreground=yes + +# Hello message: each entry represents a display line; default: builtin +Hello="Starting VyOS" +Hello=" ... " + +# GoodBye message: each entry represents a display line; default: builtin +GoodBye=" VyOS shutting" +GoodBye=" down... " + +# Sets the interval in microseconds for updating the display. +# [default: 125000 meaning 8Hz] +FrameInterval=250000 # 4 updates per second + +# Sets the default time in seconds to displays a screen. [default: 4] +WaitTime=1 + +# If set to no, LCDd will start with screen rotation disabled. This has the +# same effect as if the ToggleRotateKey had been pressed. Rotation will start +# if the ToggleRotateKey is pressed. Note that this setting does not turn off +# priority sorting of screens. [default: on; legal: on, off] +AutoRotate=on + +# If yes, the the serverscreen will be rotated as a usual info screen. If no, +# it will be a background screen, only visible when no other screens are +# active. The special value 'blank' is similar to no, but only a blank screen +# is displayed. [default: on; legal: on, off, blank] +ServerScreen=blank + +# Set master backlight setting. If set to 'open' a client may control the +# backlight for its own screens (only). [default: open; legal: off, open, on] +Backlight=on + +# Set master heartbeat setting. If set to 'open' a client may control the +# heartbeat for its own screens (only). [default: open; legal: off, open, on] +Heartbeat=off + +# set title scrolling speed [default: 10; legal: 0-10] +TitleSpeed=10 + +{% if model is defined and model is not none %} +{% if model.startswith('CFA-') %} +## CrystalFontz packet driver (for CFA533, CFA631, CFA633 & CFA635) ## +[CFontzPacket] +Model={{ model.split('-')[1] }} +Device={{ device }} +Contrast=350 +Brightness=500 +OffBrightness=50 +Reboot=yes +USB=yes +{% endif %} +{% endif %} diff --git a/data/templates/lcd/lcdproc.conf.tmpl b/data/templates/lcd/lcdproc.conf.tmpl new file mode 100644 index 000000000..c79f3cd0d --- /dev/null +++ b/data/templates/lcd/lcdproc.conf.tmpl @@ -0,0 +1,60 @@ +### autogenerated by system-lcd.py ### + +# LCDproc client configuration file + +[lcdproc] +Server=127.0.0.1 +Port=13666 + +# set reporting level +ReportLevel=3 + +# report to to syslog ? +ReportToSyslog=true + +Foreground=yes + +[CPU] +Active=true +OnTime=1 +OffTime=2 +ShowInvisible=false + +[SMP-CPU] +Active=false + +[Memory] +Active=false + +[Load] +Active=false + +[Uptime] +Active=true + +[ProcSize] +Active=false + +[Disk] +Active=false + +[About] +Active=false + +[TimeDate] +Active=true +TimeFormat="%H:%M:%S" + +[OldTime] +Active=false + +[BigClock] +Active=false + +[MiniClock] +Active=false + +# Display the title bar in two-line mode. Note that with four lines or more +# the title is always shown. [default: true; legal: true, false] +ShowTitle=false + diff --git a/data/templates/system-display/LCDd.conf.tmpl b/data/templates/system-display/LCDd.conf.tmpl deleted file mode 100644 index 1dd646202..000000000 --- a/data/templates/system-display/LCDd.conf.tmpl +++ /dev/null @@ -1,1500 +0,0 @@ -### Autogenerted by system-display.py ## -# LCDd.conf -- configuration file for the LCDproc server daemon LCDd -# -# This file contains the configuration for the LCDd server. -# -# The format is ini-file-like. It is divided into sections that start at -# markers that look like [section]. Comments are all line-based comments, -# and are lines that start with '#' or ';'. -# -# The server has a 'central' section named [server]. For the menu there is -# a section called [menu]. Further each driver has a section which -# defines how the driver acts. -# -# The drivers are activated by specifying them in a driver= line in the -# server section, like: -# -# Driver=curses -# -# This tells LCDd to use the curses driver. -# The first driver that is loaded and is capable of output defines the -# size of the display. The default driver to use is curses. -# If the driver is specified using the -d command line option, -# the Driver= options in the config file are ignored. -# -# The drivers read their own options from the respective sections. - - - -## Server section with all kinds of settings for the LCDd server ## -[server] - -# Where can we find the driver modules ? -# IMPORTANT: Make sure to change this setting to reflect your -# specific setup! Otherwise LCDd won't be able to find -# the driver modules and will thus not be able to -# function properly. -# NOTE: Always place a slash as last character ! -DriverPath=/usr/lib/x86_64-linux-gnu/lcdproc/ - -# Tells the server to load the given drivers. Multiple lines can be given. -# The name of the driver is case sensitive and determines the section -# where to look for further configuration options of the specific driver -# as well as the name of the dynamic driver module to load at runtime. -# The latter one can be changed by giving a File= directive in the -# driver specific section. -# -# The following drivers are supported: -# bayrad, CFontz, CFontzPacket, curses, CwLnx, ea65, EyeboxOne, futaba, -# g15, glcd, glcdlib, glk, hd44780, icp_a106, imon, imonlcd,, IOWarrior, -# irman, joy, lb216, lcdm001, lcterm, linux_input, lirc, lis, MD8800, -# mdm166a, ms6931, mtc_s16209x, MtxOrb, mx5000, NoritakeVFD, -# Olimex_MOD_LCD1x9, picolcd, pyramid, rawserial, sdeclcd, sed1330, -# sed1520, serialPOS, serialVFD, shuttleVFD, sli, stv5730, svga, t6963, -# text, tyan, ula200, vlsys_m428, xosd, yard2LCD -{%- if model == 'sdec' %} -Driver=sdeclcd -{%- endif %} - -{%- if model == 'ezio' %} -Driver=hd44780 -{%- endif %} - -{%- if model == 'test' %} -Driver=CFontzPacket -{%- endif %} - -# Tells the driver to bind to the given interface. [default: 127.0.0.1] -#Bind=127.0.0.1 - -# Listen on this specified port. [default: 13666] -#Port=13666 - -# Sets the reporting level; defaults to warnings and errors only. -# [default: 2; legal: 0-5] -#ReportLevel=3 - -# Should we report to syslog instead of stderr? [default: no; legal: yes, no] -#ReportToSyslog=yes - -# User to run as. LCDd will drop its root privileges and run as this user -# instead. [default: nobody] -User=nobody - -# The server will stay in the foreground if set to yes. -# [default: no, legal: yes, no] -#Foreground=yes - -# Hello message: each entry represents a display line; default: builtin -Hello="{%- if hello %}{{ hello }}{%- else %}Welcome to VyOS{%- endif %}" - -# GoodBye message: each entry represents a display line; default: builtin -GoodBye="{%- if bye %}{{ bye }}{%- else %}Bye from VyOS{%- endif %}" - -# Sets the interval in microseconds for updating the display. -# [default: 125000 meaning 8Hz] -#FrameInterval=125000 - -# Sets the default time in seconds to displays a screen. [default: 4] -WaitTime={%- if time %}{{ time }}{%- else%}4{%- endif %} - -# If set to no, LCDd will start with screen rotation disabled. This has the -# same effect as if the ToggleRotateKey had been pressed. Rotation will start -# if the ToggleRotateKey is pressed. Note that this setting does not turn off -# priority sorting of screens. [default: on; legal: on, off] -#AutoRotate=off - -# If yes, the the serverscreen will be rotated as a usual info screen. If no, -# it will be a background screen, only visible when no other screens are -# active. The special value 'blank' is similar to no, but only a blank screen -# is displayed. [default: on; legal: on, off, blank] -ServerScreen=no - -# Set master backlight setting. If set to 'open' a client may control the -# backlight for its own screens (only). [default: open; legal: off, open, on] -#Backlight=open - -# Set master heartbeat setting. If set to 'open' a client may control the -# heartbeat for its own screens (only). [default: open; legal: off, open, on] -#Heartbeat=open - -# set title scrolling speed [default: 10; legal: 0-10] -#TitleSpeed=10 - -# The "...Key=" lines define what the server does with keypresses that -# don't go to any client. The ToggleRotateKey stops rotation of screens, while -# the PrevScreenKey and NextScreenKey go back / forward one screen (even if -# rotation is disabled. -# Assign the key string returned by the driver to the ...Key setting. These -# are the defaults: -ToggleRotateKey=Enter -PrevScreenKey=Left -NextScreenKey=Right -#ScrollUpKey=Up -#ScrollDownKey=Down - -## The menu section. The menu is an internal LCDproc client. ## -[menu] -# If true the server allows transitions between different client's menus -# [default: false; legal: true, false] -#PermissiveGoto=false - -# You can configure what keys the menu should use. Note that the MenuKey -# will be reserved exclusively, the others work in shared mode. - -# Up to six keys are supported. The MenuKey (to enter and exit the menu), the -# EnterKey (to select values) and at least one movement keys are required. -# These are the default key assignments: -MenuKey=Escape -EnterKey=Enter -UpKey=Up -DownKey=Down -#LeftKey=Left -#RightKey=Right - - -### Driver sections are below this line, in alphabetical order ### - - -## EMAC BayRAD driver ## -[bayrad] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] -Speed=9600 - - - -## CrystalFontz driver (for CF632 & CF634) ## -[CFontz] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD size [default: 20x4] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=0 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, -# 115200] -Speed=9600 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - - - -## CrystalFontz packet driver (for CFA533, CFA631, CFA633 & CFA635) ## -[CFontzPacket] -{%- if model == 'test' %} -Model=533 -Device=/dev/serial/by-bus/usb0b1.1p1.0 -Contrast=350 -Brightness=1000 -OffBrightness=50 -Reboot=yes -USB=yes -{%- endif %} - - -## Curses driver ## -[curses] - -# color settings -# foreground color [default: blue] -Foreground=blue -# background color when "backlight" is off [default: cyan] -Background=cyan -# background color when "backlight" is on [default: red] -Backlight=red - -# display size [default: 20x4] -Size=20x2 - -# What position (X,Y) to start the left top corner at... -# Default: (7,7) -TopLeftX=7 -TopLeftY=7 - -# use ASC symbols for icons & bars [default: no; legal: yes, no] -UseACS=no - -# draw Border [default: yes; legal: yes, no] -DrawBorder=yes - - - -## Cwlinux driver ## -[CwLnx] - -# Select the LCD model [default: 12232; legal: 12232, 12832, 1602] -Model=12232 - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 - -# Select the LCD size. Default depends on model: -# 12232: 20x4 -# 12832: 21x4 -# 1602: 16x2 -Size=20x4 - -# Set the communication speed [default: 19200; legal: 9600, 19200] -Speed=19200 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - -# If you have a keypad connected. Keypad layout is currently not -# configureable from the config file. -Keypad=yes - -# If you have a non-standard keypad you can associate any keystrings to keys. -# There are 6 input keys in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following is the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - -# keypad_test_mode permits one to test keypad assignment -# Default value is no -#keypad_test_mode=yes - - - -## ea65 driver for the display in AOpen XC Cube AV EA65 media barebones ## -[ea65] - -# Device is fixed /dev/ttyS1 -# Width and Height are fixed 9x1 - -# As the VFD is self luminescent we don't have a backlight -# But we can use the backlight functions to control the front LEDs -# Brightness 0 to 299 -> LEDs off -# Brightness 300 to 699 -> LEDs half bright -# Brightness 700 to 1000 -> LEDs full bright -Brightness=500 -# OffBrightness is the the value used for the 'backlight off' state -OffBrightness=0 - - - -## EyeboxOne driver ## -[EyeboxOne] - -# Select the output device to use [default: /dev/ttyS1] -# Device=/dev/cua01 -Device=/dev/ttyS1 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -Backlight=yes - -# Switch on the cursor? [default: no] -Cursor=no - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Enter Key is a \r character, so it's hardcoded in the driver -LeftKey=D -RightKey=C -UpKey=A -DownKey=B -EscapeKey=P - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - -## Futaba TOSD-5711BB VFD Driver ## -[futaba] - -## g15 driver for Logitech G15 Keyboard LCDs ## -[g15] - -# Display size (currently unused) -size=20x5 - - - -## glcd generic graphical display driver -[glcd] -# Select what type of connection. See documentation for types. -ConnectionType=t6963 - -# Width and height of the display in pixel. The supported sizes may depend on -# the ConnectionType. [default: 128x64; legal: 1x1 - 640x480] -#Size=128x64 - -# Width and height of a character cell in pixels. This value is only used if -# the driver has been compiled with FreeType and it is enabled. Otherwise the -# default 6x8 cell is used. -#CellSize=12x16 - -# If LCDproc has been compiled with FreeType 2 support this option can be used -# to turn if off intentionally. [default: yes; legal: yes, no] -#useFT2=no - -# Path to font file to use for FreeType rendering. This font must be monospace -# and should contain some special Unicode characters like arrows (Andale Mono -# is recommended and can be fetched at http://corefonts.sf.net). -#normal_font=/usr/local/lib/X11/fonts/TTF/andalemo.ttf - -# Some fonts miss the Unicode characters used to represent icons. In this case -# the built-in 5x8 font can used if this option is turned off. [default: yes; -# legal: yes, no] -#fontHasIcons=no - -# Set the initial contrast if supported by connection type. -# [default: 600; legal: 0 - 1000] -#Contrast=600 - -# Set brightness of the backlight if the backlight is switched 'on'. -# [default: 800; legal: 0 - 1000] -#Brightness=1000 - -# Set brightness of the backlight if the backlight is switched 'off'. Set this -# to zero to completely turn off the backlight. [default: 100; legal: 0 - 1000] -#OffBrightness=0 - -# Time (ms) from first key report to first repeat. Set to 0 to disable repeated -# key reports. [default: 500; legal: 0 - 3000] -#KeyRepeatDelay=500 - -# Time (ms) between repeated key reports. Ignored if KeyRepeatDelay is disabled -# (set to zero). [default: 300; legal: 0 - 3000] -#KeyRepeatInterval=300 - -# Assign key strings to keys. There may be up to 16 keys numbered 'A' to 'Z'. -# By default keys 'A' to 'F' are assigned Up, Down, Left, Right, Enter, Escape. -KeyMap_A=Up -KeyMap_B=Down -KeyMap_C=Enter -KeyMap_D=Escape - -# --- t6963 options --- - -# Parallel port to use [default: 0x378; legal: 0x200 - 0x400] -#Port=0x378 - -# Use LPT port in bi-directional mode. This should work on most LPT port -# and is required for proper timing! [default: yes; legal: yes, no] -#bidirectional=yes - -# Insert additional delays into reads / writes. [default: no; legal: yes, no] -#delayBus=no - -# --- serdisplib options --- - -# Name of the underlying serdisplib driver, e.g. ctinclud. See -# serdisplib documentation for details. -serdisp_name=t6963 - -# The display device to use, e.g. serraw:/dev/ttyS0, -# parport:/dev/parport0 or USB:07c0/1501. -serdisp_device=/dev/ppi0 - -# Options string to pass to serdisplib during initialization. Use -# this to set any display related options (e.g. wiring). The display size is -# always set based on the Size configured above! By default, no options are -# set. -# Important: The value must be quoted as it contains equal signs! -#serdisp_options="INVERT=1" - -# --- x11 options --- - -# PixelSize is size of each dot in pixels + a pixel gap. [default: 3+1] -#x11_PixelSize=3+1 - -# Colors are in RRGGBB format prefixed with "0x". -# PixelColor: The color of each dot at full contrast. [default: 0x000000] -#x11_PixelColor=0x000000 - -# BacklightColor: The color of the backlight as full brightness. -# [default: 0x80FF80] -#x11_BacklightColor=0x80FF80 - -# Border: Adds a border (empty space) around the LCD portion of X11 window. -# [default: 20] -#x11_Border=20 - -# Inverted: inverts the pixels [default: no; legal: yes, no] -#x11_Inverted=no - -# --- picolcdgfx options --- - -# Time in ms for usb_read to wait on a key press. [default: 125; legal: >0] -#picolcdgfx_KeyTimeout=125 - -# Inverted: Inverts the pixels. [default: no; legal: yes or no] -#picolcdgfx_Inverted=no - - - -## glcdlib meta driver for graphical LCDs ## -[glcdlib] - -## mandatory: - -# which graphical display supported by graphlcd-base to use [default: image] -# (see /etc/graphlcd.conf for possible drivers) -Driver=noritake800 - -# no=use graphlcd bitmap fonts (they have only one size / font file) -# yes=use fonts supported by FreeType2 (needs Freetype2 support in -# libglcdprocdriver and its dependants) -UseFT2=yes - -# text resolution in fixed width characters [default: 16x4] -# (if it won't fit according to available physical pixel resolution -# and the minimum available font face size in pixels, then -# 'DebugBorder' will automatically be turned on) -TextResolution=20x4 - -# path to font file to use -FontFile=/usr/share/fonts/corefonts/courbd.ttf - -## these only apply if UseFT2=yes: - -# character encoding to use -CharEncoding=iso8859-2 - -# minimum size in pixels in which fonts should be rendered -MinFontFaceSize=7x12 - -## optional: -Brightness=50 # Brightness (in %) if applicable -Contrast=50 # Contrast (in %) if applicable -Backlight=no # Backlight if applicable -UpsideDown=no # flip image upside down -Invert=no # invert light/dark pixels -ShowDebugFrame=no # turns on/off 1 pixel thick debugging - # border within the usable text area, - # for setting up TextResolution and - # MinFontFaceSize (if using FT2); -ShowBigBorder=no # border around the unused area -ShowThinBorder=yes # border around the unused area -PixelShiftX=0 -PixelShiftY=2 - - - -## Matrix Orbital GLK driver ## -[glk] - -# select the serial device to use [default: /dev/lcd] -Device=/dev/lcd - -# set the initial contrast value [default: 500; legal: 0 - 1000] -Contrast=500 - -# set the serial port speed [default: 19200; legal: 9600, 19200, 38400, 57600, 115200] -Speed=19200 - - - -## Hitachi HD44780 driver ## -[hd44780] -{%- if model == 'ezio' %} -ConnectionType=ezio -Device=/dev/ttyUSB0 -Keypad=yes -Size=16x2 -KeyMatrix_4_1=Enter -KeyMatrix_4_2=Up -KeyMatrix_4_3=Down -KeyMatrix_4_4=Escape -{%- endif %} - -# Select what type of connection. See documentation for available types. -#ConnectionType=4bit - -# Select model if have non-standard one which require extra initialization or handling or -# just want extra features it offers. -# Available: standard (default), extended, winstar_oled, pt6314_vfd -# - standard is default, use for LCDs not mentioned below. -# - extended, hd66712, ks0073: allows use 4-line "extended" mode, -# same as deprecated now option ExtendedMode=yes -# - winstar_oled, weh00xxyya: changes initialization for WINSTAR's WEH00xxyyA displays -# and allows handling brightness -# - pt6314_vfd: allows handling brightness on PTC's PT6314 VFDs -# -# This option should be independent of connection type. -#Model = standard - -# I/O address of the LPT port. Usual values are: 0x278, 0x378 and 0x3BC. -# For I2C connections this sets the slave address (usually 0x20). -#Port=0x378 - -# Device of the serial, I2C, or SPI interface [default: /dev/lcd] -#Device=/dev/ttyS0 - -# Bitrate of the serial port (0 for interface default) -#Speed=0 - -# If you have a keypad connected. -# You may also need to configure the keypad layout further on in this file. -#Keypad=no - -# Set the initial contrast (bwctusb, lcd2usb, and usb4all) -# [default: 800; legal: 0 - 1000] -#Contrast=0 - -# Set brightness of the backlight (lcd2usb and usb4all): -# Brightness is the brightness while the backlight is set to 'on'. -# [default: 800; legal: 0 - 1000] -#Brightness=1000 - -# OffBrightness is the brightness while the backlight is set to 'off'. -# [default: 300; legal: 0 - 1000] -#OffBrightness=0 - -# Specify if you have a switchable backlight and if yes, can select method for turning it on/off: -# -# - none - no switchable backlight is available. For compability also boolean -# 0, n, no, off and false are aliases. -# - external - use external pin or any other method defined with ConnectionType backlight -# handling. For backward compability also this value is chosen for boolean -# TRUE values: 1, y, yes, on and true. -# - internal - means that backlight is handled using internal commands according -# to selected display model (with Model option). Depending on model, -# Brightness and OffBrightness options can be taken into account. -# - internalCmds - means that commands for turning on and off backlight are given -# with extra options BacklightOnCmd and BacklightOffCmd, which would be treated -# as catch up (last resort) for other types of displays which have similar features. -# -# You can provide multiple occurences of this option to use more than one method. -# Default is model specific: Winstar OLED and PT6314 VFD enables internal backlight mode, -# for others it is set to none. -#Backlight = none - -# Commands for enabling internal backlight for use with Backlight=internalCmds. -# Up to 4 bytes can be encoded, as integer number in big-endian order. -# -# NOTE: this is advanced option, if command contains bits other than only brighness handling, -# they must be set accordingly to not disrupt display state. If for example 'FUNCTION SET' command -# is used for this purpose, bits of interface length (4-bit / 8-bit) must be set according to -# selected ConnectionType. -#BacklightCmdOn=0x1223 - -# Commands for disabling internal backlight for use with Backlight=internalCmds. -# Up to 4 bytes can be encoded, as integer number in big-endian order. -#BacklightCmdOff=0x1234 - - -# If you have the additional output port ("bargraph") and you want to -# be able to control it with the lcdproc OUTPUT command -#OutputPort=no - -# Specifies if the last line is pixel addressable (yes) or it controls an -# underline effect (no). [default: yes; legal: yes, no] -#Lastline=yes - -# Specifies the size of the LCD. -# In case of multiple combined displays, this should be the total size. -#Size=20x4 - -# For multiple combined displays: how many lines does each display have. -# Vspan=2,2 means both displays have 2 lines. -#vspan=2,2 - -# If you have an HD66712, a KS0073 or another controller with 'extended mode', -# set this flag to get into 4-line mode. On displays with just two lines, do -# not set this flag. -# As an additional restriction, controllers with and without extended mode -# AND 4 lines cannot be mixed for those connection types that support more -# than one display! -# NOTE: This option is deprecated in favour of choosing Model=extended option. -#ExtendedMode=yes - -# In extended mode, on some controllers like the ST7036 (in 3 line mode) -# the next line in DDRAM won't start 0x20 higher. [default: 0x20] -#LineAddress=0x10 - -# Character map to to map ISO-8859-1 to the LCD's character set -# [default: hd44780_default; legal: hd44780_default, hd44780_euro, ea_ks0073, -# sed1278f_0b, hd44780_koi8_r, hd44780_cp1251, hd44780_8859_5, upd16314, -# weh001602a_1] -# (hd44780_koi8_r, hd44780_cp1251, hd44780_8859_5, upd16314 and weh001602a_1 -# are possible if compiled with additional charmaps) -CharMap=hd44780_default - -# Font bank to be used for some displays such as the WINSTAR WEH001602A -# 0: English/Japanese (default) -# 1: Western Europe I -# 2: English/Rusian -# 3: Western Europe II -#FontBank=0 - -# If your display is slow and cannot keep up with the flow of data from -# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 -# to increase the delays. Default: 1. -#DelayMult=2 - -# Some displays (e.g. vdr-wakeup) need a message from the driver to that it -# is still alive. When set to a value bigger then null the character in the -# upper left corner is updated every seconds. Default: 0. -#KeepAliveDisplay=0 - -# If you experience occasional garbage on your display you can use this -# option as workaround. If set to a value bigger than null it forces a -# full screen refresh seconds. Default: 0. -#RefreshDisplay=5 - -# You can reduce the inserted delays by setting this to false. -# On fast PCs it is possible your LCD does not respond correctly. -# Default: true. -#DelayBus=true - -# If you have a keypad you can assign keystrings to the keys. -# See documentation for used terms and how to wire it. -# For example to give directly connected key 4 the string "Enter", use: -# KeyDirect_4=Enter -# For matrix keys use the X and Y coordinates of the key: -# KeyMatrix_1_3=Enter -#KeyMatrix_4_1=Enter -#KeyMatrix_4_2=Up -#KeyMatrix_4_3=Down -#KeyMatrix_4_4=Escape - -## ICP Peripheral Comminication Protocol driver ## -# Supports A125 and A106 -# -# Short Press Select: Down -# Long Press Select: Up -# Short Press Enter: Enter -# Long Press Enter: Escape -# -[icp_a106] -Device=/dev/ttyS1 - -# Display dimensions -Size=20x2 - - -## Code Mercenaries IO-Warrior driver ## -[IOWarrior] - -# display dimensions -Size=20x4 - -# serial number. Must be exactly as listed by usbview -# (if not given, the 1st IOWarrior found gets used) -#SerialNumber=00000674 - -# If you have an HD66712, a KS0073 or another 'almost HD44780-compatible', -# set this flag to get into extended mode (4-line linear). -#ExtendedMode=yes - -# Specifies if the last line is pixel addressable (yes) or it controls an -# underline effect (no). [default: yes; legal: yes, no] -#Lastline=yes - - - -## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## -[imon] - -# select the device to use -Device=/dev/lcd0 - -# display dimensions -Size=16x2 - -# Character map to to map ISO-8859-1 to the displays character set. -# [default: none; legal: none, hd44780_euro, upd16314, hd44780_koi8_r, -# hd44780_cp1251, hd44780_8859_5 ] (upd16314, hd44780_koi8_r, -# hd44780_cp1251, hd44780_8859_5 are possible if compiled with additional -# charmaps) -CharMap=hd44780_euro - -## Soundgraph iMON LCD ## -[imonlcd] -# Specify which iMon protocol should be used -# [legal: 0, 1; default: 0] -# Choose 0 for 15c2:ffdc device, -# Choose 1 for 15c2:0038 device -Protocol=0 - -# Set the exit behavior [legal: 0-2; default: 1] -# 0 means leave shutdown message, -# 1 means show the big clock, -# 2 means blank device -#OnExit=2 - -# Select the output device to use [default: /dev/lcd0] -Device=/dev/lcd0 - -# Select the displays contrast [default: 200; legal: 0-1000] -Contrast=200 - -# Specify the size of the display in pixels [default: 96x16] -#Size=96x16 - -# Set the backlight state [default: on; legal: on, off] -#Backlight=on - -# Set the disc mode [legal: 0,1; default: 0] -# 0 => spin the "slim" disc - two disc segments, -# 1 => their complement spinning; -#DiscMode=0 - - - -## IrMan driver ## -[IrMan] -# in case of trouble with IrMan, try the Lirc emulator for IrMan - -# Select the input device to use -#Device=/dev/irman - -# Select the configuration file to use -#Config=/etc/irman.cfg - - - -## IRtrans driver ## -[irtrans] - -# Does the device have a backlight? [default: no; legal: yes, no] -#Backlight=no - -# IRTrans device to connect to [default: localhost] -#Hostname=localhost - -# display dimensions -Size=16x2 - - - -## Joystick driver ## -[joy] - -# Select the input device to use [default: /dev/js0] -Device=/dev/js0 - -# set the axis map -Map_Axis1neg=Left -Map_Axis1pos=Right -Map_Axis2neg=Up -Map_Axis2pos=Down - -# set the button map -Map_Button1=Enter -Map_Button2=Escape - - -## JW-002 driver ## -[jw002] - -# Select the output device to use [default: /dev/lcd] -#Device=/dev/ttyS0 - -# Set the display size [default: 24x8] -Size=24x8 - -# Optional X and Y offsets (in characters) to center a smaller display -# size on the full 24x8 panel -X_offset=0 -Y_offset=0 - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Pick which font page to use [default: 0] -# Note that different fonts probably have their bargraph chars in different -# spots. For ROM-based fonts 0-3, those characters are already known. -Font=0 - -# The following table translates from jw002 key letters to logical key names. -# By default no keys are mapped, meaning the keypad is not used at all. -#KeyMap_I=Left -#KeyMap_J=Right -#KeyMap_H=Up -#KeyMap_K=Down -#KeyMap_L=Enter -#KeyMap_A=Escape -# See the [menu] section for an explanation of the key mappings - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - -## LB216 driver ## -[lb216] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Set the communication speed [default: 9600; legal: 2400, 9600] -Speed=9600 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## LCDM001 driver ## -[lcdm001] - -Device=/dev/ttyS1 - -# keypad settings -# Keyname Function -# Normal context Menu context -# ------- -------------- ------------ -# PauseKey Pause/Continue Enter/select -# BackKey Back(Go to previous screen) Up/Left -# ForwardKey Forward(Go to next screen) Down/Right -# MainMenuKey Open main menu Exit/Cancel -PauseKey=LeftKey -BackKey=UpKey -ForwardKey=DownKey -MainMenuKey=RightKey - -# You can rearrange the settings here. -# If your device is broken, have a look at server/drivers/lcdm001.h - - - -## HNE LCTerm driver ## -[lcterm] -Device=/dev/ttyS1 -Size=16x2 - - -## Linux event device input driver ## -[linux_input] - -# Select the input device to use [default: /dev/input/event0]. This may be -# either an absolute path to the input node, starting with '/', or -# an input device name, e.g. "Logitech Gaming Keyboard Gaming Keys". -# Device=/dev/input/event0 - -# specify a non-default key map -#key=1,Escape -#key=28,Enter -#key=96,Enter -#key=105,Left -#key=106,Right -#key=103,Up -#key=108,Down - - -## LIRC input driver ## -[lirc] - -# Specify an alternative location of the lircrc file [default: ~/.lircrc] -#lircrc=/etc/lircrc.lcdproc - -# Must be the same as in your lircrc -#prog=lcdd - - - -## LIS MCE 2005 driver ## -[lis] - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -# 0-250 = 25%, 251-500 = 50%, 501-750 = 75%, 751-1000 = 100% -#Brightness=1000 - -# Columns by lines [default: 20x2] -#Size=20x2 - -# USB Vendor ID [default: 0x0403] -# Change only if testing a compatible device. -#VendorID=0x0403 - -# USB Product ID [default: 0x6001] -# Change only if testing a compatible device. -#ProductID=0x6001 - -# Specifies if the last line is pixel addressable (yes) or it only controls an -# underline effect (no). [default: yes; legal: yes, no] -#Lastline=yes - - - -##The driver for the VFD of the Medion MD8800 PC ## -[MD8800] -# device to use [default: /dev/ttyS1] -#Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 - - - -## Futuba MDM166A Display -[mdm166a] -# Show self-running clock after LCDd shutdown -# Possible values: [default: no; legal: no, small, big] -Clock=big -# Dim display, no dimming gives full brightness [default: no, legal: yes, no] -Dimming=no -# Dim display in case LCDd is inactive [default: no, legal: yes, no] -OffDimming=yes - - - -## MSI MS-6931 driver for displays in 1HU servers ## -[ms6931] - -# device to use [default: /dev/ttyS1] -Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - - - -## MTC-S16209x driver ## -[mtc_s16209x] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## Matrix Orbital driver ## -[MtxOrb] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 - -# Set the display size [default: 20x4] -Size=20x4 - -# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] -Type=lkd - -# Set the initial contrast [default: 480] -# NOTE: The driver will ignore this if the display -# is a vfd or vkd as they don't have this feature -Contrast=480 - -# Some old displays do not have an adjustable backlight but only can -# switch the backlight on/off. If you experience randomly appearing block -# characters, try setting this to false. [default: yes; legal: yes, no] -hasAdjustableBacklight=no - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=0 - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# The following table translates from MtxOrb key letters to logical key names. -# By default no keys are mapped, meaning the keypad is not used at all. -#KeyMap_A=Left -#KeyMap_B=Right -#KeyMap_C=Up -#KeyMap_D=Down -#KeyMap_E=Enter -#KeyMap_F=Escape -# See the [menu] section for an explanation of the key mappings - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - - -## mx5000 driver for LCD display on the Logitech MX5000 keyboard ## -[mx5000] - -# Select the output device to use [default: /dev/hiddev0] -Device = /dev/hiddev0 -# Time to wait in ms after the refresh screen has been sent [default: 1000] -WaitAfterRefresh = 1000 - - - -## Noritake VFD driver ## -[NoritakeVFD] -# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 -# [default: /dev/lcd] -Device=/dev/ttyS0 -# Specifies the size of the LCD. -Size=20x4 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 -# Set serial data parity [default: 0; legal: 0-2 ] -# Meaning: 0(=none), 1(=odd), 2(=even) -Parity=0 -# re-initialize the VFD [default: no; legal: yes, no] -Reboot=no - - - -## Olimex MOD-LCD1x9 driver ## -[Olimex_MOD_LCD1x9] - -# device file of the i2c controler -Device=/dev/i2c-0 - - -## Mini-box.com picoLCD (usblcd) driver ## -[picolcd] - -# KeyTimeout is only used if the picoLCD driver is built with libusb-0.1. When -# built with libusb-1.0 key and IR data is input asynchronously so there is no -# need to wait for the USB data. -# KeyTimeout is the time in ms that LCDd spends waiting for a key press before -# cycling through other duties. Higher values make LCDd use less CPU time and -# make key presses more detectable. Lower values make LCDd more responsive -# but a little prone to missing key presses. 500 (.5 second) is the default -# and a balanced value. [default: 500; legal: 0 - 1000] -KeyTimeout=500 - -# Key auto repeat is only available if the picoLCD driver is built with -# libusb-1.0. Use KeyRepeatDelay and KeyRepeatInterval to configure key auto -# repeat. -# -# Key auto repeat delay (time in ms from first key report to first repeat). Use -# zero to disable auto repeat. [default: 300; legal: 0 - 3000] -KeyRepeatDelay=300 - -# Key auto repeat interval (time in ms between repeat reports). Only used if -# KeyRepeatDelay is not zero. [default: 200; legal: 0 - 3000] -KeyRepeatInterval=200 - -# Sets the initial state of the backlight upon start-up. -# [default: on; legal: on, off] -#Backlight=on - -# Set the initial brightness [default: 1000; legal: 0 - 1000]. Works only -# with the 20x4 device -Brightness=1000 - -# Set the brightness while the backlight is 'off' [default: 0; legal: 0 - 1000]. -# Works only with the 20x4 device. -#OffBrightness=0 - -# Set the initial contrast [default: 1000; legal: 0 - 1000] -Contrast=1000 - -# Link the key lights to the backlight? [default: on; legal: on, off] -#LinkLights=off - -# Light the keys? [default: on; legal: on, off] -Keylights=on - -# If Keylights is on, the you can unlight specific keys below: -# Key0 is the directional pad. Key1 - Key5 correspond to the F1 - F5 keys. -# There is no LED for the +/- keys. This is a handy way to indicate to users -# which keys are disabled. [default: on; legal: on, off] -Key0Light=on -Key1Light=on -Key2Light=on -Key3Light=on -Key4Light=on -Key5Light=on - -# Host name or IP address of the LIRC instance that is to receive IR codes -# If not set, or set to an empty value, IR support is disabled. -#LircHost=127.0.0.1 - -# UDP port on which LIRC is listening [default: 8765; legal: 1 - 65535] -LircPort=8765 - -# UDP data time unit for LIRC [default: off; legal: on, off] -# On: times sent in microseconds (requires LIRC UDP driver that accepts this). -# Off: times sent in 'jiffies' (1/16384s) (supported by standard LIRC UDP driver). -LircTime_us=on - -# Threshold in microseconds of the gap that triggers flushing the IR data -# to lirc [default: 8000; legal: 1000 - ] -# If LircTime_us is on values greater than 32.767ms will disable the flush -# If LircTime_us is off values greater than 1.999938s will disable the flush -LircFlushThreshold=10000 - - - -## Pyramid LCD driver ## -[pyramid] - -# device to connect to [default: /dev/lcd] -Device=/dev/ttyUSB0 - - - -## rawserial driver ## -[rawserial] - -# Select the output device to use [default: /dev/cuaU0] -Device=/dev/ttyS0 - -# Serial port baudrate [default: 9600] -Speed=9600 - -# Specifies the size of the LCD. If this driver is loaded as a secondary driver -# it always adopts to the size of the primary driver. If loaded as the only -# (or primary) driver, the size can be set. [default: 40x4] -#Size=16x2 - -# How often to dump the LCD contents out the port, in Hertz (times per second) -# 1 = once per second, 4 is 4 times per second, 0.1 is once every 10 seconds. -# [default: 1; legal: 0.0005 - 10] -UpdateRate=1 - - - -## SDEC driver for Watchguard Firebox ## -[sdeclcd] -# No options - - -## Seiko Epson 1330 driver ## -[sed1330] - -# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446, SP14Q002) -# Note: Currently only tested with G321D & SP14Q002. -Type=G321D - -# Width x Height of a character cell in pixels [legal: 6x7 - 8x16; default: 6x10] -CellSize=6x10 - -# Select what type of connection [legal: classic, bitshaker; default: classic] -ConnectionType=classic - - - -## Seiko Epson 1520 driver ## -[sed1520] - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Select the interface type (wiring) for the display. Supported values are -# 68 for 68-style connection (RESET level high) and 80 for 80-style connection -# (RESET level low). [legal: 68, 80; default: 80] -InterfaceType=80 - -# On fast machines it may be necessary to slow down transfer to the display. -# If this value is set to zero, delay is disabled. Any value greater than -# zero slows down each write by one microsecond. [legal: 0-1000; default: 1] -DelayMult=0 - -# The original wiring used an inverter to drive the control lines. If you do -# not use an inverter set haveInverter to no. [default: yes; legal: yes, no] -HaveInverter=no - -# On some displays column data in memory is mapped to segment lines from right -# to left. This is called inverted mapping (not to be confused with -# 'haveInverter' from above). [default: no; legal: yes, no] -#InvertedMapping=yes - -# At least one display is reported (Everbouquet MG1203D) that requires sending -# three times 0xFF before a reset during initialization. -# [default: no; legal: yes, no] -#UseHardReset=yes - - -## serial POS display driver ## -[serialPOS] - -# Device to use in serial mode [default: /dev/ttyS0] -Device=/dev/ttyS0 - -# Specifies the size of the display in characters. [default: 16x2] -Size=16x2 - -# Specifies the cell size of each character cell on the display in characters. -# [default: 5x8] -Cellsize=5x8 - -# Specifies the number of custom characters supported by the display. -# [default: 0] -Custom_chars=0 - -# Set the communication protocol to use with the POS display. -# [default: AEDEX; legal: AEDEX, CD5220, Epson, Emax, LogicControls, Ultimate] -Type=AEDEX - -# communication baud rate with the display [default: 9600; legal: 1200, 2400, -# 4800, 9600, 19200, 115200] -Speed=9600 - - - -## Serial VFD driver ## -## Drives various (see below) serial 5x7dot VFD's. ## -[serialVFD] - -# Specifies the displaytype.[default: 0] -# 0 NEC (FIPC8367 based) VFDs. -# 1 KD Rev 2.1. -# 2 Noritake VFDs (*). -# 3 Futaba VFDs -# 4 IEE S03601-95B -# 5 IEE S03601-96-080 (*) -# 6 Futaba NA202SD08FA (allmost IEE compatible) -# 7 Samsung 20S207DA4 and 20S207DA6 -# 8 Nixdorf BA6x / VT100 -# (* most should work, not tested yet.) -Type=0 - -# "no" if display connected serial, "yes" if connected parallel. [default: no] -# I.e. serial by default -use_parallel=no - -# Number of Custom-Characters. default is display type dependent -#Custom-Characters=0 - -# Portaddress where the LPT is. Used in parallel mode only. Usual values are -# 0x278, 0x378 and 0x3BC. -Port=0x378 - -# Set parallel port timing delay (us). Used in parallel mode only. -# [default: 2; legal: 0 - 255] -#PortWait=2 - -# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 -Device=/dev/ttyS1 - -# Specifies the size of the VFD. -Size=20x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -# (4 steps 0-250, 251-500, 501-750, 751-1000) -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -# (4 steps 0-250, 251-500, 501-750, 751-1000) -OffBrightness=0 - -# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] -#ISO_8859_1=yes - - - -## shuttleVFD driver ## -[shuttleVFD] -# No options - - - -## stv5730 driver ## -[stv5730] - -# Port the device is connected to [default: 0x378] -Port=0x378 - - -[SureElec] - -# Port the device is connected to (by default first USB serial port) -Device=/dev/ttyUSB0 - -# Edition level of the device (can be 1, 2 or 3) [default: 2] -#Edition=1 - -# set display size -# Note: The size can be obtained directly from device for edition 2 & 3. -#Size=16x2 - -# Set the initial contrast [default: 480; legal: 0 - 1000] -#Contrast=200 - -# Set the initial brightness [default: 480; legal: 1 - 1000] -#Brightness=480 - -# Set the initial off-brightness [default: 100; legal: 1 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -#OffBrightness=100 - - -## SVGAlib driver ## -[svga] - -# svgalib mode to use [default: G320x240x256 ] -# legal values are supported svgalib modes -#Mode=G640x480x256 - -# set display size [default: 20x4] -Size=20x4 - -# Set the initial contrast [default: 500; legal: 0 - 1000] -# Can be set but does not change anything internally -Contrast=500 - -# Set the initial brightness [default: 1000; legal: 1 - 1000] -Brightness=1000 - -# Set the initial off-brightness [default: 500; legal: 1 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=500 - - - -## Text driver ## -[text] -# Set the display size [default: 20x4] -Size=20x4 - - - -## Toshiba T6963 driver ## -[t6963] - -# set display size in pixels [default: 128x64] -Size=128x64 - -# port to use [default: 0x378; legal: 0x200 - 0x400] -Port=0x378 - -# Use LPT port in bi-directional mode. This should work on most LPT port and -# is required for proper timing! [default: yes; legal: yes, no] -#bidirectional=yes - -# Insert additional delays into reads / writes. [default: no; legal: yes, no] -#delayBus=no - -# Clear graphic memory on start-up. [default: no; legal: yes, no] -#ClearGraphic=no - - - -## Tyan Barebones LCD driver (GS10 & GS12 series) ## -[tyan] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 4800, 9600] -Speed=9600 - -# set display size [default: 16x2] -Size=16x2 - - - -## ELV ula200 driver ## -[ula200] - -# Select the LCD size [default: 20x4] -Size=20x4 - -# If you have a non standard keypad you can associate any keystrings to keys. -# There are 6 input key in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following it the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - - - -## Wirz SLI LCD driver ## -[sli] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, -# 38400, 57600, 115200] -Speed=19200 - - - -## vlsys_m428 for VFD/IR combination in Moneual MonCaso 320 ## -[vlsys_m428] - -# Select the output device to use [default: /dev/ttyUSB0] -#Device=/dev/ttyUSB0 - - - -## OnScreen Display using libxosd ## -[xosd] - -# set display size [default: 20x4] -Size=20x4 - -# Offset in pixels from the top-left corner of the monitor [default: 0x0] -Offset=200x200 - -# X font to use, in XLFD format, as given by "xfontsel" -Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-* - -## Y.A.R.D.2 LCD section -[yard2LCD] -Size=20x4 -# If rendering rate is too high, change in server\main.h #define RENDER_FREQ 8 to "1" - -# EOF diff --git a/data/templates/system-display/lcdproc.conf.tmpl b/data/templates/system-display/lcdproc.conf.tmpl deleted file mode 100644 index 92aee8efe..000000000 --- a/data/templates/system-display/lcdproc.conf.tmpl +++ /dev/null @@ -1,173 +0,0 @@ -### autogenerated by system-display.py ### - -# system display show host (CPU|SMP-CPU|CPU-Graph|Load|Memory|Proc-Size|Disk|Uptime) -# network interface alias -# units (bps|Bps|pps) -# clock (big|mini|date-time) - -# LCDproc client configuration file - -## general options ## -[lcdproc] -# address of the LCDd server to connect to -Server=127.0.0.1 - -# Port of the server to connect to -Port=13666 - -# set reporting level -#ReportLevel=2 - -# report to to syslog ? -ReportToSyslog=true - -# run in foreground [default: false; legal: true, false] -#Foreground=true - -# PidFile location when running as daemon [default: /var/run/lcdproc.pid] -#PidFile=/var/run/lcdproc.pid - -# slow down initial announcement of modes (in 1/100s) -#delay=2 - - -## screen specific configuration options ## -{%- if show %} -# display name for the main menu [default: LCDproc HOST] -DisplayName="{%- if show['title'] %}{{ show['title'] }}{%- else %}VyOS{%- endif %}" - -{%- if show['host'] %} - -[CPU] -# Show screen -Active={%- if 'cpu' in show['host'] %}true{%- else %}false{%- endif %} -OnTime=1 -OffTime=2 -ShowInvisible=false - -[SMP-CPU] -# Show screen -Active={%- if 'cpu-all' in show['host'] %}true{%- else %}false{%- endif %} - -[Memory] -# Show screen -Active={%- if 'memory' in show['host'] %}true{%- else %}false{%- endif %} - -[Load] -# Show screen -Active={%- if 'load-hist' in show['host'] %}true{%- else %}false{%- endif %} -# Min Load Avg at which the backlight will be turned off [default: 0.05] -LowLoad=0.05 -# Max Load Avg at which the backlight will start blinking [default: 1.3] -HighLoad=1.3 - -[Uptime] -# Show screen -Active={%- if 'uptime' in show['host'] %}true{%- else %}false{%- endif %} - -[CPUGraph] -# Show screen -Active={%- if 'cpu-hist' in show['host'] %}true{%- else %}false{%- endif %} - -[ProcSize] -# Show screen -Active={%- if 'proc' in show['host'] %}true{%- else %}false{%- endif %} - -[Disk] -# Show screen -Active={%- if 'disk' in show['host'] %}true{%- else %}false{%- endif %} -{%- else %} {# if show['host'] #} -{# Turn off sections that default active #} - -[CPU] -Active=false - -[Memory] -Active=false - -[Load] -Active=false - -{%- endif %} {# if show['host'] #} - -[TimeDate] -# Show screen -Active={%- if show['clock'] == 'date-time' %}true{%- else %}false{%- endif %} -# time format [default: %H:%M:%S; legal: see strftime(3)] -TimeFormat="%H:%M:%S" -# date format [default: %x; legal: see strftime(3)] -DateFormat="%x" - -[BigClock] -# Show screen -Active={%- if show['clock'] == 'big' %}true{%- else %}false{%- endif %} - -[MiniClock] -# Show screen -Active={%- if show['clock'] == 'mini' %}true{%- else %}false{%- endif %} -# time format [default: %H:%M; legal: see strftime(3)] -TimeFormat="%H:%M" - -{%- if show['network'] %} -[Iface] -# Show screen -Active={%- if show['network']['interface'] %}true{%- else %}false{%- endif %} -{%- for i in show['network']['interface'] %} -# Show stats for Interface {{ i }} -Interface{{ loop.index0 }}={{ i }} -{%- if show['network']['interface'][i]['alias'] %} -# Interface alias name to display [default: ] -Alias{{ loop.index0 }}={{ show['network']['interface'][i]['alias'] }} -{%- endif %} -{%- endfor %} - -# Units to display [default: byte; legal: byte, bit, packet] -{%- if show['network']['units'] == 'bps' %} -unit=bit -{%- elif show['network']['units'] == 'Bps'%} -unit=byte -{%- elif show['network']['units'] == 'pps' %} -unit=packet -{%- else %} -unit=bit -{%- endif %} -# add screen with transferred traffic -#transfer=TRUE -{%- endif %} {# if show['network'] #} - -{%- else %}{# if show #} -{# Turn off sections that default active #} - -[CPU] -Active=false - -[Memory] -Active=false - -[Load] -Active=false - -[TimeDate] -Active=false -{%- endif %}{# if show #} - -[Battery] -# Show screen -Active=false - -[About] -# Show screen -Active=false - -[OldTime] -# Show screen -Active=false -# time format [default: %H:%M:%S; legal: see strftime(3)] -TimeFormat="%H:%M:%S" -# date format [default: %x; legal: see strftime(3)] -DateFormat="%x" -# Display the title bar in two-line mode. Note that with four lines or more -# the title is always shown. [default: true; legal: true, false] -#ShowTitle=false - -# EOF -- cgit v1.2.3