From e4fabffe740800d2ad9ded4aec4b768485289653 Mon Sep 17 00:00:00 2001 From: Christian Breunig Date: Tue, 3 Oct 2023 18:14:23 +0200 Subject: pppoe: T5630: allow to specify MRU in addition to already configurable MTU Set the MRU (Maximum Receive Unit) value to n. PPPd will ask the peer to send packets of no more than n bytes. The value of n must be between 128 and 16384, the default was always 1492 to match PPPoE MTU. A value of 296 works well on very slow links (40 bytes for TCP/IP header + 256 bytes of data). Note that for the IPv6 protocol, the MRU must be at least 1280. CLI: set interfaces pppoe pppoe0 mru 1280 (cherry picked from commit e062a8c11856f213983f5b41f50d4f9dbc0dde0f) --- smoketest/scripts/cli/test_interfaces_pppoe.py | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'smoketest/scripts') diff --git a/smoketest/scripts/cli/test_interfaces_pppoe.py b/smoketest/scripts/cli/test_interfaces_pppoe.py index 0ce5e2fe0..0685833fb 100755 --- a/smoketest/scripts/cli/test_interfaces_pppoe.py +++ b/smoketest/scripts/cli/test_interfaces_pppoe.py @@ -59,10 +59,12 @@ class PPPoEInterfaceTest(VyOSUnitTestSHIM.TestCase): user = f'VyOS-user-{interface}' passwd = f'VyOS-passwd-{interface}' mtu = '1400' + mru = '1300' self.cli_set(base_path + [interface, 'authentication', 'username', user]) self.cli_set(base_path + [interface, 'authentication', 'password', passwd]) self.cli_set(base_path + [interface, 'mtu', mtu]) + self.cli_set(base_path + [interface, 'mru', mru]) self.cli_set(base_path + [interface, 'no-peer-dns']) # check validate() - a source-interface is required @@ -80,6 +82,8 @@ class PPPoEInterfaceTest(VyOSUnitTestSHIM.TestCase): tmp = get_config_value(interface, 'mtu')[1] self.assertEqual(tmp, mtu) + tmp = get_config_value(interface, 'mru')[1] + self.assertEqual(tmp, mru) tmp = get_config_value(interface, 'user')[1].replace('"', '') self.assertEqual(tmp, user) tmp = get_config_value(interface, 'password')[1].replace('"', '') -- cgit v1.2.3