### Autogenerted by system-display.py ##

# LCDd.conf -- configuration file for the LCDproc server daemon LCDd
#
# This file contains the configuration for the LCDd server.
#
# The format is ini-file-like. It is divided into sections that start at
# markers that look like [section]. Comments are all line-based comments,
# and are lines that start with '#' or ';'.
#
# The server has a 'central' section named [server]. For the menu there is
# a section called [menu]. Further each driver has a section which
# defines how the driver acts.
#
# The drivers are activated by specifying them in a driver= line in the
# server section, like:
#
#   Driver=curses
#
# This tells LCDd to use the curses driver.
# The first driver that is loaded and is capable of output defines the
# size of the display. The default driver to use is curses.
# If the driver is specified using the -d <driver> command line option,
# the Driver= options in the config file are ignored.
#
# The drivers read their own options from the respective sections.

## Server section with all kinds of settings for the LCDd server ##
[server]

# Where can we find the driver modules ?
# NOTE: Always place a slash as last character !
DriverPath=/usr/lib/x86_64-linux-gnu/lcdproc/

# Tells the server to load the given drivers. Multiple lines can be given.
# The name of the driver is case sensitive and determines the section
# where to look for further configuration options of the specific driver
# as well as the name of the dynamic driver module to load at runtime.
# The latter one can be changed by giving a File= directive in the
# driver specific section.
#
# The following drivers are supported:
#   bayrad, CFontz, CFontzPacket, curses, CwLnx, ea65, EyeboxOne, futaba,
#   g15, glcd, glcdlib, glk, hd44780, icp_a106, imon, imonlcd,, IOWarrior,
#   irman, joy, lb216, lcdm001, lcterm, linux_input, lirc, lis, MD8800,
#   mdm166a, ms6931, mtc_s16209x, MtxOrb, mx5000, NoritakeVFD,
#   Olimex_MOD_LCD1x9, picolcd, pyramid, rawserial, sdeclcd, sed1330,
#   sed1520, serialPOS, serialVFD, shuttleVFD, sli, stv5730, svga, t6963,
#   text, tyan, ula200, vlsys_m428, xosd, yard2LCD

{% if model is defined %}
{%   if model.startswith('cfa-') %}
Driver=CFontzPacket
{%   elif model == 'sdec' %}
Driver=sdeclcd
{%   endif %}
{% endif %}

# Tells the driver to bind to the given interface. [default: 127.0.0.1]
Bind=127.0.0.1

# Listen on this specified port. [default: 13666]
Port=13666

# Sets the reporting level; defaults to warnings and errors only.
# [default: 2; legal: 0-5]
ReportLevel=3

# Should we report to syslog instead of stderr? [default: no; legal: yes, no]
ReportToSyslog=yes

# User to run as.  LCDd will drop its root privileges and run as this user
# instead. [default: nobody]
User=nobody

# The server will stay in the foreground if set to yes.
# [default: no, legal: yes, no]
Foreground=yes

# Hello message: each entry represents a display line; default: builtin
Hello="Starting VyOS"
Hello="      ...    "

# GoodBye message: each entry represents a display line; default: builtin
GoodBye=" VyOS shutting"
GoodBye="    down...   "

# Sets the interval in microseconds for updating the display.
# [default: 125000 meaning 8Hz]
FrameInterval=250000 # 4 updates per second

# Sets the default time in seconds to displays a screen. [default: 4]
WaitTime=1

# If set to no, LCDd will start with screen rotation disabled. This has the
# same effect as if the ToggleRotateKey had been pressed. Rotation will start
# if the ToggleRotateKey is pressed. Note that this setting does not turn off
# priority sorting of screens. [default: on; legal: on, off]
AutoRotate=on

# If yes, the the serverscreen will be rotated as a usual info screen. If no,
# it will be a background screen, only visible when no other screens are
# active. The special value 'blank' is similar to no, but only a blank screen
# is displayed. [default: on; legal: on, off, blank]
ServerScreen=blank

# Set master backlight setting. If set to 'open' a client may control the
# backlight for its own screens (only). [default: open; legal: off, open, on]
Backlight=on

# Set master heartbeat setting. If set to 'open' a client may control the
# heartbeat for its own screens (only). [default: open; legal: off, open, on]
Heartbeat=off

# set title scrolling speed [default: 10; legal: 0-10]
TitleSpeed=10

{% if model is defined and model is not none %}
{%   if model.startswith('cfa-') %}
## CrystalFontz packet driver (for CFA533, CFA631, CFA633 & CFA635) ##
[CFontzPacket]
Model={{ model.split('-')[1] }}
Device={{ device }}
Contrast=350
Brightness=500
OffBrightness=50
Reboot=yes
USB=yes
{%   elif model == 'sdec' %}
## SDEC driver for Lanner, Watchguard, Sophos sppliances ##
[sdeclcd]
# No options
{%   endif %}
{% endif %}