Configure the authentication password for an area #include Control distribution of default information Distribute a default route Distribute default route for IPv4 #include Distribute default route for IPv6 #include Set the authentication password for a routing domain #include Dynamic hostname for IS-IS IS-IS level number level-1 level-1-2 level-2 level-1 Act as a station router level-1-2 Act as both a station and an area router level-2 Act as an area router (level-1|level-1-2|level-2) Log adjacency state changes Minimum interval between regenerating same LSP u32:1-120 Minimum interval in seconds Configure the maximum size of generated LSPs u32:128-4352 Maximum size of generated LSPs 1497 LSP refresh interval u32:1-65235 LSP refresh interval in seconds Maximum LSP lifetime u32:350-65535 LSP lifetime in seconds Use old-style (ISO 10589) or new-style packet formats narrow transition wide narrow Use old style of TLVs with narrow metric transition Send and accept both styles of TLVs during transition wide Use new style of TLVs to carry wider metric (narrow|transition|wide) #include A Network Entity Title for this process (ISO only) XX.XXXX. ... .XXX.XX Network entity title (NET) [a-fA-F0-9]{2}(\.[a-fA-F0-9]{4}){3,9}\.[a-fA-F0-9]{2} Use the RFC 6232 purge-originator IS-IS traffic engineering extensions Enable MPLS traffic engineering extensions MPLS traffic engineering router ID ipv4 IPv4 address Segment-Routing (SPRING) settings Segment Routing Global Block label range #include Segment Routing Local Block label range #include Maximum MPLS labels allowed for this router u32:1-16 MPLS label depth Static IPv4/IPv6 prefix segment/label mapping ipv4net IPv4 prefix segment ipv6net IPv6 prefix segment Specify the absolute value of prefix segment/label ID Specify the absolute value of prefix segment/label ID u32:16-1048575 The absolute segment/label ID value Request upstream neighbor to replace segment/label with explicit null label Do not request penultimate hop popping for segment/label Specify the index value of prefix segment/label ID Specify the index value of prefix segment/label ID u32:0-65535 The index segment/label ID value Request upstream neighbor to replace segment/label with explicit null label Do not request penultimate hop popping for segment/label Redistribute information from another routing protocol Redistribute IPv4 routes Border Gateway Protocol (BGP) #include Redistribute connected routes into IS-IS #include Redistribute kernel routes into IS-IS #include Redistribute OSPF routes into IS-IS #include Redistribute RIP routes into IS-IS #include Redistribute Babel routes into IS-IS #include Redistribute static routes into IS-IS #include Redistribute IPv6 routes Redistribute BGP routes into IS-IS #include Redistribute connected routes into IS-IS #include Redistribute kernel routes into IS-IS #include Redistribute OSPFv3 routes into IS-IS #include Redistribute RIPng routes into IS-IS #include Redistribute Babel routes into IS-IS #include Redistribute static routes into IS-IS #include Set attached bit to identify as L1/L2 router for inter-area traffic Set overload bit to avoid any transit traffic IETF SPF delay algorithm Delay used while in QUIET state u32:0-60000 Delay used while in QUIET state (in ms) Delay used while in SHORT_WAIT state u32:0-60000 Delay used while in SHORT_WAIT state (in ms) Delay used while in LONG_WAIT u32:0-60000 Delay used while in LONG_WAIT state in ms Time with no received IGP events before considering IGP stable u32:0-60000 Time with no received IGP events before considering IGP stable in ms Maximum duration needed to learn all the events related to a single failure u32:0-60000 Maximum duration needed to learn all the events related to a single failure in ms Minimum interval between SPF calculations u32:1-120 Interval in seconds Interface params #include Configure circuit type for interface level-1 level-1-2 level-2-only level-1 Level-1 only adjacencies are formed level-1-2 Level-1-2 adjacencies are formed level-2-only Level-2 only adjacencies are formed (level-1|level-1-2|level-2-only) Add padding to IS-IS hello packets Set Hello interval u32:1-600 Set Hello interval Set Hello interval u32:2-100 Set multiplier for Hello holding time #include #include Set network type point-to-point network type #include Configure the authentication password for a circuit #include Set priority for Designated Router election u32:0-127 Priority value Set PSNP interval u32:0-127 PSNP interval in seconds Disable three-way handshake #include