Access list to filter networks in routing updates policy access-list u32 Access-list number Filter for outgoing routing update bgp connected kernel rip static bgp Filter BGP routes connected Filter connected routes isis Filter IS-IS routes kernel Filter Kernel routes rip Filter RIP routes static Filter static routes (bgp|connected|isis|kernel|rip|static) Must be bgp, connected, kernel, rip, or static OSPF area settings u32 OSPF area number in decimal notation ipv4 OSPF area number in dotted decimal notation Area type Normal OSPF area Not-So-Stubby OSPF area Summary-default cost of an NSSA area u32:0-16777215 Summary default cost Do not inject inter-area routes into stub Configure NSSA-ABR always candidate never always Always translate LSA types candidate Translate for election never Never translate LSA types (always|candidate|never) candidate Stub OSPF area Summary-default cost u32:0-16777215 Summary default cost Do not inject inter-area routes into the stub OSPF area authentication type plaintext-password md5 plaintext-password Use plain-text authentication md5 Use MD5 authentication (plaintext-password|md5) OSPF network ipv4net OSPF network Summarize routes matching a prefix (border routers only) ipv4net Area range prefix Metric for this range u32:0-16777215 Metric for this range Do not advertise this range Advertise area range as another prefix ipv4net Advertise area range as another prefix Area shortcut mode default disable enable default Set default disable Disable shortcutting mode enable Enable shortcutting mode (default|disable|enable) Set the filter for networks announced to other areas policy access-list u32 Access-list number Set the filter for networks from other areas announced policy access-list u32 Access-list number Virtual link ipv4 OSPF area in dotted decimal notation #include #include #include #include Metric of redistributed routes u32:0-16777214 Metric of redistributed routes Maximum multiple paths (ECMP) u32:1-64 Maximum multiple paths (ECMP) Administrative distance #include OSPF administrative distance #include Interface configuration txt Interface name #include Enable OSPF on this interface protocols ospf area u32 OSPF area ID as decimal notation ipv4 OSPF area ID in IP address notation #include #include #include Interface bandwidth (Mbit/s) u32:1-100000 Bandwidth in Megabit/sec (for calculating OSPF cost) Hello multiplier factor u32:1-10 Number of Hellos to send each second Network type broadcast non-broadcast point-to-multipoint point-to-point broadcast Broadcast network type non-broadcast Non-broadcast network type point-to-multipoint Point-to-multipoint network type point-to-point Point-to-point network type (broadcast|non-broadcast|point-to-multipoint|point-to-point) Must be broadcast, non-broadcast, point-to-multipoint or point-to-point Suppress routing updates on an interface #include #include OSPF maximum and infinite-distance metric Advertise own Router-LSA with infinite distance (stub router) Administratively apply, for an indefinite period Advertise stub-router prior to full shutdown of OSPF u32:5-100 Time (seconds) to advertise self as stub-router Automatically advertise stub Router-LSA on startup of OSPF u32:5-86400 Time (seconds) to advertise self as stub-router MultiProtocol Label Switching-Traffic Engineering (MPLS-TE) parameters Enable MPLS-TE functionality Stable IP address of the advertising router ipv4 Stable IP address of the advertising router 0.0.0.0 Specify neighbor router ipv4 Neighbor IP address Dead neighbor polling interval u32:1-65535 Seconds between dead neighbor polling interval 60 Neighbor priority in seconds u32:0-255 Neighbor priority 0 OSPF specific parameters OSPF ABR type cisco ibm shortcut standard cisco Cisco ABR type ibm IBM ABR type shortcut Shortcut ABR type standard Standard ABR type (cisco|ibm|shortcut|standard) cisco Enable the Opaque-LSA capability (rfc2370) Enable RFC1583 criteria for handling AS external routes #include Suppress routing updates on an interface default default Default to suppress routing updates on all interfaces (default) Segment-Routing (SPRING) settings Segment Routing Global Block label range #include Segment Routing Local Block label range #include Maximum MPLS labels allowed for this router u32:1-16 MPLS label depth Static IPv4 prefix segment/label mapping ipv4net IPv4 prefix segment Specify the index value of prefix segment/label ID Specify the index value of prefix segment/label ID u32:0-65535 The index segment/label ID value Request upstream neighbor to replace segment/label with explicit null label Do not request penultimate hop popping for segment/label Redistribute information from another routing protocol Redistribute BGP routes #include #include #include Redistribute connected routes #include #include #include Redistribute IS-IS routes #include #include #include Redistribute Kernel routes #include #include #include Redistribute RIP routes #include #include #include Redistribute Babel routes #include #include #include Redistribute statically configured routes #include #include #include Redistribute non-main Kernel Routing Table protocols static table u32:1-200 Policy route table number #include #include #include Adjust refresh parameters Refresh timer u32:10-1800 Timer value in seconds #include Adjust routing timers Throttling adaptive timers OSPF SPF timers Delay from the first change received to SPF calculation u32:0-600000 Delay in milliseconds 200 Initial hold time between consecutive SPF calculations u32:0-600000 Initial hold time in milliseconds 1000 Maximum hold time u32:0-600000 Max hold time in milliseconds 10000