Point-to-Point Protocol over Ethernet (PPPoE) Interface 322 pppoe[0-9]+ PPPoE interface must be named pppoeN pppoeN PPPoE dialer interface name #include #include #include #include #include #include #include #include Delay before disconnecting idle session (in seconds) u32:0-86400 Idle timeout in seconds Timeout must be in range 0 to 86400 PPPoE RFC2516 host-uniq tag txt Host-uniq tag as byte string in HEX ([a-fA-F0-9][a-fA-F0-9]){1,18} Host-uniq must be specified as hex-adecimal byte-string (even number of HEX characters) Delay before re-dial to the access concentrator when PPP session terminated by peer (in seconds) u32:0-86400 Holdoff time in seconds Holdoff must be in range 0 to 86400 30 IPv4 routing parameters #include #include #include IPv6 routing parameters IPv6 address configuration modes #include #include #include #include IPv4 address of local end of the PPPoE link ipv4 Address of local end of the PPPoE link #include #include 1492 Maximum Receive Unit (MRU) (default: MTU value) u32:128-16384 Maximum Receive Unit in byte MRU must be between 128 and 16384 #include IPv4 address of remote end of the PPPoE link ipv4 Address of remote end of the PPPoE link Service name, only connect to access concentrators advertising this [a-zA-Z0-9]+ Service name must be alphanumeric only #include #include