Intermediate System to Intermediate System (ISIS) text(TAG) ISO Routing area tag Configure the authentication password for an area Plain-text authentication type <text> Level-wide password MD5 authentication type <md5> Level-wide password Control distribution of default information Distribute a default route Distribute default route for IPv4 Distribute default route into level-1 Distribute default route into level-2 Distribute default route for IPv6 Distribute default route into level-1 always always Always advertise default route Distribute default route into level-2 always always Always advertise default route Set the authentication password for a routing domain Plain-text authentication type <text> Level-wide password Dynamic hostname for IS-IS IS-IS level number level-1 level-1-2 level-2 level-1 Act as a station router level-1-2 Act as both a station and an area router level-2 Act as an area router (level-1|level-1-2|level-2) Minimum interval between regenerating same LSP <1-120> Minimum interval in seconds Configure the maximum size of generated LSPs <128-4352> Maximum size of generated LSPs LSP refresh interval <1-65235> LSP refresh interval in seconds Maximum LSP lifetime <350-65535> LSP lifetime in seconds Use old-style (ISO 10589) or new-style packet formats narrow transition wide narrow Use old style of TLVs with narrow metric transition Send and accept both styles of TLVs during transition wide Use new style of TLVs to carry wider metric (narrow|transition|wide) A Network Entity Title for this process (ISO only) XX.XXXX. ... .XXX.XX Network entity title (NET) [a-fA-F0-9]{2}(\.[a-fA-F0-9]{4}){3,9}\.[a-fA-F0-9]{2} Use the RFC 6232 purge-originator Redistribute information from another routing protocol Redistribute IPv4 routes Border Gateway Protocol (BGP) #include Redistribute connected routes into ISIS #include Redistribute kernel routes into ISIS #include Redistribute OSPF routes into ISIS #include Redistribute RIP routes into ISIS #include Redistribute static routes into ISIS #include Set attached bit to identify as L1/L2 router for inter-area traffic Set overload bit to avoid any transit traffic IETF SPF delay algorithm Delay used while in QUIET state <0-60000> Delay used while in QUIET state (in ms) Delay used while in SHORT_WAIT state <0-60000> Delay used while in SHORT_WAIT state (in ms) Delay used while in LONG_WAIT <0-60000> Delay used while in LONG_WAIT state (in ms) Time with no received IGP events before considering IGP stable <0-60000> Time with no received IGP events before considering IGP stable (in ms) Maximum duration needed to learn all the events related to a single failure <0-60000> Maximum duration needed to learn all the events related to a single failure (in ms) Minimum interval between SPF calculations <1-120> Minimum interval between consecutive SPFs in seconds Interface params Enable BFD support Configure circuit type for interface level-1 level-1-2 level-2-only level-1 Level-1 only adjacencies are formed level-1-2 Level-1-2 adjacencies are formed level-2-only Level-2 only adjacencies are formed (level-1|level-1-2|level-2-only) Add padding to IS-IS hello packets Set Hello interval <1-600> Set Hello interval Set Hello interval <2-100> Set multiplier for Hello holding time Set default metric for circuit <0-16777215> Default metric value Set network type point-to-point network type Configure the passive mode for interface Configure the authentication password for a circuit Plain-text authentication type <text> Circuit password Set priority for Designated Router election <0-127> Priority value Set PSNP interval in seconds <0-127> Priority value Enable/Disable three-way handshake