interfaces { ethernet eth0 { address dhcp } ethernet eth1 { address 192.168.0.1/24 } ethernet eth2 { } loopback lo { } } nat { source { rule 100 { outbound-interface eth0 source { address 192.168.0.0/24 } translation { address masquerade } } } } service { pppoe-server { access-concentrator ACN authentication { local-users { username foo { password bar rate-limit { download 20480 upload 10240 } } } mode local } client-ip-pool { start 192.168.0.100 stop 192.168.0.200 } gateway-address 192.168.0.2 interface eth1 { } interface eth2 { vlan-id 10 vlan-id 20 vlan-range 30-40 vlan-range 50-60 } name-server 192.168.0.1 } ssh { } } system { config-management { commit-revisions 100 } console { device ttyS0 { speed 115200 } } host-name vyos login { user vyos { authentication { encrypted-password $6$O5gJRlDYQpj$MtrCV9lxMnZPMbcxlU7.FI793MImNHznxGoMFgm3Q6QP3vfKJyOSRCt3Ka/GzFQyW1yZS4NS616NLHaIPPFHc0 plaintext-password "" } } } ntp { server 0.pool.ntp.org { } server 1.pool.ntp.org { } server 2.pool.ntp.org { } } syslog { global { facility all { level info } facility protocols { level debug } } } } // Warning: Do not remove the following line. // vyos-config-version: "broadcast-relay@1:cluster@1:config-management@1:conntrack@1:conntrack-sync@1:dhcp-relay@2:dhcp-server@5:dhcpv6-server@1:dns-forwarding@3:firewall@5:https@2:interfaces@13:ipoe-server@1:ipsec@5:l2tp@3:lldp@1:mdns@1:nat@5:ntp@1:pppoe-server@5:pptp@2:qos@1:quagga@6:salt@1:snmp@2:ssh@2:sstp@3:system@19:vrrp@2:vyos-accel-ppp@2:wanloadbalance@3:webgui@1:webproxy@2:zone-policy@1" // Release version: 1.3-rolling-202010260127