#!/usr/bin/env python3 # # Copyright (C) 2019-2020 VyOS maintainers and contributors # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License version 2 or later as # published by the Free Software Foundation. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . import os from sys import exit from copy import deepcopy from netifaces import interfaces from vyos.ifconfig import EthernetIf, Section from vyos.ifconfig_vlan import apply_vlan_config, verify_vlan_config from vyos.configdict import list_diff, intf_to_dict, add_to_dict from vyos.validate import is_member from vyos.config import Config from vyos import ConfigError default_config_data = { 'address': [], 'address_remove': [], 'description': '', 'deleted': False, 'dhcp_client_id': '', 'dhcp_hostname': '', 'dhcp_vendor_class_id': '', 'dhcpv6_prm_only': False, 'dhcpv6_temporary': False, 'disable': False, 'disable_link_detect': 1, 'duplex': 'auto', 'flow_control': 'on', 'hw_id': '', 'ip_arp_cache_tmo': 30, 'ip_disable_arp_filter': 1, 'ip_enable_arp_accept': 0, 'ip_enable_arp_announce': 0, 'ip_enable_arp_ignore': 0, 'ip_proxy_arp': 0, 'ip_proxy_arp_pvlan': 0, 'ipv6_autoconf': 0, 'ipv6_eui64_prefix': [], 'ipv6_eui64_prefix_remove': [], 'ipv6_forwarding': 1, 'ipv6_dup_addr_detect': 1, 'is_bridge_member': False, 'is_bond_member': False, 'intf': '', 'mac': '', 'mtu': 1500, 'offload_gro': 'off', 'offload_gso': 'off', 'offload_sg': 'off', 'offload_tso': 'off', 'offload_ufo': 'off', 'speed': 'auto', 'vif_s': [], 'vif_s_remove': [], 'vif': [], 'vif_remove': [], 'vrf': '' } def get_config(): # determine tagNode instance if 'VYOS_TAGNODE_VALUE' not in os.environ: raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified') ifname = os.environ['VYOS_TAGNODE_VALUE'] conf = Config() # check if ethernet interface has been removed cfg_base = ['interfaces', 'ethernet', ifname] if not conf.exists(cfg_base): eth = deepcopy(default_config_data) eth['intf'] = ifname eth['deleted'] = True # we can not bail out early as ethernet interface can not be removed # Kernel will complain with: RTNETLINK answers: Operation not supported. # Thus we need to remove individual settings return eth # set new configuration level conf.set_level(cfg_base) eth, disabled = intf_to_dict(conf, default_config_data) # disable ethernet flow control (pause frames) if conf.exists('disable-flow-control'): eth['flow_control'] = 'off' # retrieve real hardware address if conf.exists('hw-id'): eth['hw_id'] = conf.return_value('hw-id') # interface duplex if conf.exists('duplex'): eth['duplex'] = conf.return_value('duplex') # ARP cache entry timeout in seconds if conf.exists('ip arp-cache-timeout'): eth['ip_arp_cache_tmo'] = int(conf.return_value('ip arp-cache-timeout')) # Enable private VLAN proxy ARP on this interface if conf.exists('ip proxy-arp-pvlan'): eth['ip_proxy_arp_pvlan'] = 1 # check if we are a member of any bond eth['is_bond_member'] = is_member(conf, eth['intf'], 'bonding') # GRO (generic receive offload) if conf.exists('offload-options generic-receive'): eth['offload_gro'] = conf.return_value('offload-options generic-receive') # GSO (generic segmentation offload) if conf.exists('offload-options generic-segmentation'): eth['offload_gso'] = conf.return_value('offload-options generic-segmentation') # scatter-gather option if conf.exists('offload-options scatter-gather'): eth['offload_sg'] = conf.return_value('offload-options scatter-gather') # TSO (TCP segmentation offloading) if conf.exists('offload-options tcp-segmentation'): eth['offload_tso'] = conf.return_value('offload-options tcp-segmentation') # UDP fragmentation offloading if conf.exists('offload-options udp-fragmentation'): eth['offload_ufo'] = conf.return_value('offload-options udp-fragmentation') # interface speed if conf.exists('speed'): eth['speed'] = conf.return_value('speed') # remove default IPv6 link-local address if member of a bond if eth['is_bond_member'] and 'fe80::/64' in eth['ipv6_eui64_prefix']: eth['ipv6_eui64_prefix'].remove('fe80::/64') eth['ipv6_eui64_prefix_remove'].append('fe80::/64') add_to_dict(conf, disabled, eth, 'vif', 'vif') add_to_dict(conf, disabled, eth, 'vif-s', 'vif_s') return eth def verify(eth): if eth['deleted']: return None if eth['intf'] not in interfaces(): raise ConfigError(f"Interface ethernet {eth['intf']} does not exist") if eth['speed'] == 'auto': if eth['duplex'] != 'auto': raise ConfigError('If speed is hardcoded, duplex must be hardcoded, too') if eth['duplex'] == 'auto': if eth['speed'] != 'auto': raise ConfigError('If duplex is hardcoded, speed must be hardcoded, too') if eth['dhcpv6_prm_only'] and eth['dhcpv6_temporary']: raise ConfigError('DHCPv6 temporary and parameters-only options are mutually exclusive!') memberof = eth['is_bridge_member'] if eth['is_bridge_member'] else eth['is_bond_member'] if ( memberof and ( eth['address'] or eth['ipv6_eui64_prefix'] or eth['ipv6_autoconf'] ) ): raise ConfigError(( f'Cannot assign address to interface "{eth["intf"]}" ' f'as it is a member of "{memberof}"!')) if eth['vrf']: if eth['vrf'] not in interfaces(): raise ConfigError(f'VRF "{eth["vrf"]}" does not exist') if memberof: raise ConfigError(( f'Interface "{eth["intf"]}" cannot be member of VRF "{eth["vrf"]}" ' f'and "{memberof}" at the same time!')) # use common function to verify VLAN configuration verify_vlan_config(eth) return None def generate(eth): return None def apply(eth): e = EthernetIf(eth['intf']) if eth['deleted']: # delete interface e.remove() else: # update interface description used e.g. within SNMP e.set_alias(eth['description']) if eth['dhcp_client_id']: e.dhcp.v4.options['client_id'] = eth['dhcp_client_id'] if eth['dhcp_hostname']: e.dhcp.v4.options['hostname'] = eth['dhcp_hostname'] if eth['dhcp_vendor_class_id']: e.dhcp.v4.options['vendor_class_id'] = eth['dhcp_vendor_class_id'] if eth['dhcpv6_prm_only']: e.dhcp.v6.options['dhcpv6_prm_only'] = True if eth['dhcpv6_temporary']: e.dhcp.v6.options['dhcpv6_temporary'] = True # ignore link state changes e.set_link_detect(eth['disable_link_detect']) # disable ethernet flow control (pause frames) e.set_flow_control(eth['flow_control']) # configure ARP cache timeout in milliseconds e.set_arp_cache_tmo(eth['ip_arp_cache_tmo']) # configure ARP filter configuration e.set_arp_filter(eth['ip_disable_arp_filter']) # configure ARP accept e.set_arp_accept(eth['ip_enable_arp_accept']) # configure ARP announce e.set_arp_announce(eth['ip_enable_arp_announce']) # configure ARP ignore e.set_arp_ignore(eth['ip_enable_arp_ignore']) # Enable proxy-arp on this interface e.set_proxy_arp(eth['ip_proxy_arp']) # Enable private VLAN proxy ARP on this interface e.set_proxy_arp_pvlan(eth['ip_proxy_arp_pvlan']) # IPv6 address autoconfiguration e.set_ipv6_autoconf(eth['ipv6_autoconf']) # IPv6 forwarding e.set_ipv6_forwarding(eth['ipv6_forwarding']) # IPv6 Duplicate Address Detection (DAD) tries e.set_ipv6_dad_messages(eth['ipv6_dup_addr_detect']) # Delete old IPv6 EUI64 addresses before changing MAC for addr in eth['ipv6_eui64_prefix_remove']: e.del_ipv6_eui64_address(addr) # Change interface MAC address - re-set to real hardware address (hw-id) # if custom mac is removed if eth['mac']: e.set_mac(eth['mac']) elif eth['hw_id']: e.set_mac(eth['hw_id']) # Add IPv6 EUI-based addresses for addr in eth['ipv6_eui64_prefix']: e.add_ipv6_eui64_address(addr) # Maximum Transmission Unit (MTU) e.set_mtu(eth['mtu']) # GRO (generic receive offload) e.set_gro(eth['offload_gro']) # GSO (generic segmentation offload) e.set_gso(eth['offload_gso']) # scatter-gather option e.set_sg(eth['offload_sg']) # TSO (TCP segmentation offloading) e.set_tso(eth['offload_tso']) # UDP fragmentation offloading e.set_ufo(eth['offload_ufo']) # Set physical interface speed and duplex e.set_speed_duplex(eth['speed'], eth['duplex']) # Enable/Disable interface if eth['disable']: e.set_admin_state('down') else: e.set_admin_state('up') # Configure interface address(es) # - not longer required addresses get removed first # - newly addresses will be added second for addr in eth['address_remove']: e.del_addr(addr) for addr in eth['address']: e.add_addr(addr) # assign/remove VRF e.set_vrf(eth['vrf']) # remove no longer required service VLAN interfaces (vif-s) for vif_s in eth['vif_s_remove']: e.del_vlan(vif_s) # create service VLAN interfaces (vif-s) for vif_s in eth['vif_s']: s_vlan = e.add_vlan(vif_s['id'], ethertype=vif_s['ethertype']) apply_vlan_config(s_vlan, vif_s) # remove no longer required client VLAN interfaces (vif-c) # on lower service VLAN interface for vif_c in vif_s['vif_c_remove']: s_vlan.del_vlan(vif_c) # create client VLAN interfaces (vif-c) # on lower service VLAN interface for vif_c in vif_s['vif_c']: c_vlan = s_vlan.add_vlan(vif_c['id']) apply_vlan_config(c_vlan, vif_c) # remove no longer required VLAN interfaces (vif) for vif in eth['vif_remove']: e.del_vlan(vif) # create VLAN interfaces (vif) for vif in eth['vif']: # QoS priority mapping can only be set during interface creation # so we delete the interface first if required. if vif['egress_qos_changed'] or vif['ingress_qos_changed']: try: # on system bootup the above condition is true but the interface # does not exists, which throws an exception, but that's legal e.del_vlan(vif['id']) except: pass vlan = e.add_vlan(vif['id'], ingress_qos=vif['ingress_qos'], egress_qos=vif['egress_qos']) apply_vlan_config(vlan, vif) return None if __name__ == '__main__': try: c = get_config() verify(c) generate(c) apply(c) except ConfigError as e: print(e) exit(1)