#!/usr/bin/env python3 # # Copyright (C) 2019 VyOS maintainers and contributors # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License version 2 or later as # published by the Free Software Foundation. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . import os from sys import exit from re import findall from copy import deepcopy from jinja2 import FileSystemLoader, Environment from subprocess import Popen, PIPE from netifaces import interfaces from netaddr import EUI, mac_unix_expanded from vyos.config import Config from vyos.configdict import list_diff, vlan_to_dict from vyos.defaults import directories as vyos_data_dir from vyos.ifconfig import WiFiIf from vyos.ifconfig_vlan import apply_vlan_config, verify_vlan_config from vyos.util import process_running, chmod_x, chown_file from vyos import ConfigError user = 'root' group = 'vyattacfg' default_config_data = { 'address': [], 'address_remove': [], 'cap_ht' : False, 'cap_ht_40mhz_incapable' : False, 'cap_ht_powersave' : False, 'cap_ht_chan_set_width' : '', 'cap_ht_delayed_block_ack' : False, 'cap_ht_dsss_cck_40' : False, 'cap_ht_greenfield' : False, 'cap_ht_ldpc' : False, 'cap_ht_lsig_protection' : False, 'cap_ht_max_amsdu' : '', 'cap_ht_short_gi' : [], 'cap_ht_smps' : '', 'cap_ht_stbc_rx' : '', 'cap_ht_stbc_tx' : False, 'cap_req_ht' : False, 'cap_req_vht' : False, 'cap_vht' : False, 'cap_vht_antenna_cnt' : '', 'cap_vht_antenna_fixed' : False, 'cap_vht_beamform' : '', 'cap_vht_center_freq_1' : '', 'cap_vht_center_freq_2' : '', 'cap_vht_chan_set_width' : '', 'cap_vht_ldpc' : False, 'cap_vht_link_adaptation' : '', 'cap_vht_max_mpdu_exp' : '', 'cap_vht_max_mpdu' : '', 'cap_vht_short_gi' : [], 'cap_vht_stbc_rx' : '', 'cap_vht_stbc_tx' : False, 'cap_vht_tx_powersave' : False, 'cap_vht_vht_cf' : False, 'channel': '', 'country_code': '', 'description': '', 'deleted': False, 'dhcp_client_id': '', 'dhcp_hostname': '', 'dhcp_vendor_class_id': '', 'dhcpv6_prm_only': False, 'dhcpv6_temporary': False, 'disable': False, 'disable_broadcast_ssid' : False, 'disable_link_detect' : 1, 'expunge_failing_stations' : False, 'hw_id' : '', 'intf': '', 'isolate_stations' : False, 'ip_disable_arp_filter': 1, 'ip_enable_arp_accept': 0, 'ip_enable_arp_announce': 0, 'ip_enable_arp_ignore': 0, 'ipv6_autoconf': 0, 'ipv6_eui64_prefix': '', 'ipv6_forwarding': 1, 'ipv6_dup_addr_detect': 1, 'mac' : '', 'max_stations' : '', 'mgmt_frame_protection' : 'disabled', 'mode' : 'g', 'phy' : '', 'reduce_transmit_power' : '', 'sec_wep' : False, 'sec_wep_key' : [], 'sec_wpa' : False, 'sec_wpa_cipher' : [], 'sec_wpa_mode' : 'both', 'sec_wpa_passphrase' : '', 'sec_wpa_radius' : [], 'ssid' : '', 'op_mode' : 'monitor', 'vif': [], 'vif_remove': [], 'vrf': '' } def get_conf_file(conf_type, intf): cfg_dir = '/var/run/' + conf_type # create directory on demand if not os.path.exists(cfg_dir): os.mkdir(cfg_dir) chmod_x(cfg_dir) chown_file(cfg_dir, user, group) cfg_file = cfg_dir + r'/{}.cfg'.format(intf) return cfg_file def get_pid(conf_type, intf): cfg_dir = '/var/run/' + conf_type # create directory on demand if not os.path.exists(cfg_dir): os.mkdir(cfg_dir) chmod_x(cfg_dir) chown_file(cfg_dir, user, group) cfg_file = cfg_dir + r'/{}.pid'.format(intf) return cfg_file def get_wpa_suppl_config_name(intf): cfg_dir = '/var/run/wpa_supplicant' # create directory on demand if not os.path.exists(cfg_dir): os.mkdir(cfg_dir) chmod_x(cfg_dir) chown_file(cfg_dir, user, group) cfg_file = cfg_dir + r'/{}.cfg'.format(intf) return cfg_file def subprocess_cmd(command): p = Popen(command, stdout=PIPE, shell=True) p.communicate() def get_config(): wifi = deepcopy(default_config_data) conf = Config() # determine tagNode instance if 'VYOS_TAGNODE_VALUE' not in os.environ: raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified') wifi['intf'] = os.environ['VYOS_TAGNODE_VALUE'] # check if wireless interface has been removed cfg_base = 'interfaces wireless ' + wifi['intf'] if not conf.exists(cfg_base): wifi['deleted'] = True # we can not bail out early as wireless interface can not be removed # Kernel will complain with: RTNETLINK answers: Operation not supported. # Thus we need to remove individual settings return wifi # set new configuration level conf.set_level(cfg_base) # retrieve configured interface addresses if conf.exists('address'): wifi['address'] = conf.return_values('address') # get interface addresses (currently effective) - to determine which # address is no longer valid and needs to be removed eff_addr = conf.return_effective_values('address') wifi['address_remove'] = list_diff(eff_addr, wifi['address']) # 40MHz intolerance, use 20MHz only if conf.exists('capabilities ht 40mhz-incapable'): wifi['cap_ht'] = True wifi['cap_ht_40mhz_incapable'] = True # WMM-PS Unscheduled Automatic Power Save Delivery [U-APSD] if conf.exists('capabilities ht auto-powersave'): wifi['cap_ht'] = True wifi['cap_ht_powersave'] = True # Supported channel set width if conf.exists('capabilities ht channel-set-width'): wifi['cap_ht'] = True wifi['cap_ht_chan_set_width'] = conf.return_values('capabilities ht channel-set-width') # HT-delayed Block Ack if conf.exists('capabilities ht delayed-block-ack'): wifi['cap_ht'] = True wifi['cap_ht_delayed_block_ack'] = True # DSSS/CCK Mode in 40 MHz if conf.exists('capabilities ht dsss-cck-40'): wifi['cap_ht'] = True wifi['cap_ht_dsss_cck_40'] = True # HT-greenfield capability if conf.exists('capabilities ht greenfield'): wifi['cap_ht'] = True wifi['cap_ht_greenfield'] = True # LDPC coding capability if conf.exists('capabilities ht ldpc'): wifi['cap_ht'] = True wifi['cap_ht_ldpc'] = True # L-SIG TXOP protection capability if conf.exists('capabilities ht lsig-protection'): wifi['cap_ht'] = True wifi['cap_ht_lsig_protection'] = True # Set Maximum A-MSDU length if conf.exists('capabilities ht max-amsdu'): wifi['cap_ht'] = True wifi['cap_ht_max_amsdu'] = conf.return_value('capabilities ht max-amsdu') # Short GI capabilities if conf.exists('capabilities ht short-gi'): wifi['cap_ht'] = True wifi['cap_ht_short_gi'] = conf.return_values('capabilities ht short-gi') # Spatial Multiplexing Power Save (SMPS) settings if conf.exists('capabilities ht smps'): wifi['cap_ht'] = True wifi['cap_ht_smps'] = conf.return_value('capabilities ht smps') # Support for receiving PPDU using STBC (Space Time Block Coding) if conf.exists('capabilities ht stbc rx'): wifi['cap_ht'] = True wifi['cap_ht_stbc_rx'] = conf.return_value('capabilities ht stbc rx') # Support for sending PPDU using STBC (Space Time Block Coding) if conf.exists('capabilities ht stbc tx'): wifi['cap_ht'] = True wifi['cap_ht_stbc_tx'] = True # Require stations to support HT PHY (reject association if they do not) if conf.exists('capabilities require-ht'): wifi['cap_req_ht'] = True # Require stations to support VHT PHY (reject association if they do not) if conf.exists('capabilities require-vht'): wifi['cap_req_vht'] = True # Number of antennas on this card if conf.exists('capabilities vht antenna-count'): wifi['cap_vht'] = True wifi['cap_vht_antenna_cnt'] = conf.return_value('capabilities vht antenna-count') # set if antenna pattern does not change during the lifetime of an association if conf.exists('capabilities vht antenna-pattern-fixed'): wifi['cap_vht'] = True wifi['cap_vht_antenna_fixed'] = True # Beamforming capabilities if conf.exists('capabilities vht beamform'): wifi['cap_vht'] = True wifi['cap_vht_beamform'] = conf.return_values('capabilities vht beamform') # VHT operating channel center frequency - center freq 1 (for use with 80, 80+80 and 160 modes) if conf.exists('capabilities vht center-channel-freq freq-1'): wifi['cap_vht'] = True wifi['cap_vht_center_freq_1'] = conf.return_value('capabilities vht center-channel-freq freq-1') # VHT operating channel center frequency - center freq 2 (for use with the 80+80 mode) if conf.exists('capabilities vht center-channel-freq freq-2'): wifi['cap_vht'] = True wifi['cap_vht_center_freq_2'] = conf.return_value('capabilities vht center-channel-freq freq-2') # VHT operating Channel width if conf.exists('capabilities vht channel-set-width'): wifi['cap_vht'] = True wifi['cap_vht_chan_set_width'] = conf.return_value('capabilities vht channel-set-width') # LDPC coding capability if conf.exists('capabilities vht ldpc'): wifi['cap_vht'] = True wifi['cap_vht_ldpc'] = True # VHT link adaptation capabilities if conf.exists('capabilities vht link-adaptation'): wifi['cap_vht'] = True wifi['cap_vht_link_adaptation'] = conf.return_value('capabilities vht link-adaptation') # Set the maximum length of A-MPDU pre-EOF padding that the station can receive if conf.exists('capabilities vht max-mpdu-exp'): wifi['cap_vht'] = True wifi['cap_vht_max_mpdu_exp'] = conf.return_value('capabilities vht max-mpdu-exp') # Increase Maximum MPDU length if conf.exists('capabilities vht max-mpdu'): wifi['cap_vht'] = True wifi['cap_vht_max_mpdu'] = conf.return_value('capabilities vht max-mpdu') # Increase Maximum MPDU length if conf.exists('capabilities vht short-gi'): wifi['cap_vht'] = True wifi['cap_vht_short_gi'] = conf.return_values('capabilities vht short-gi') # Support for receiving PPDU using STBC (Space Time Block Coding) if conf.exists('capabilities vht stbc rx'): wifi['cap_vht'] = True wifi['cap_vht_stbc_rx'] = conf.return_value('capabilities vht stbc rx') # Support for the transmission of at least 2x1 STBC (Space Time Block Coding) if conf.exists('capabilities vht stbc tx'): wifi['cap_vht'] = True wifi['cap_vht_stbc_tx'] = True # Support for VHT TXOP Power Save Mode if conf.exists('capabilities vht tx-powersave'): wifi['cap_vht'] = True wifi['cap_vht_tx_powersave'] = True # STA supports receiving a VHT variant HT Control field if conf.exists('capabilities vht vht-cf'): wifi['cap_vht'] = True wifi['cap_vht_vht_cf'] = True # Wireless radio channel if conf.exists('channel'): wifi['channel'] = conf.return_value('channel') # retrieve interface description if conf.exists('description'): wifi['description'] = conf.return_value('description') # get DHCP client identifier if conf.exists('dhcp-options client-id'): wifi['dhcp_client_id'] = conf.return_value('dhcp-options client-id') # DHCP client host name (overrides the system host name) if conf.exists('dhcp-options host-name'): wifi['dhcp_hostname'] = conf.return_value('dhcp-options host-name') # DHCP client vendor identifier if conf.exists('dhcp-options vendor-class-id'): wifi['dhcp_vendor_class_id'] = conf.return_value('dhcp-options vendor-class-id') # DHCPv6 only acquire config parameters, no address if conf.exists('dhcpv6-options parameters-only'): wifi['dhcpv6_prm_only'] = conf.return_value('dhcpv6-options parameters-only') # DHCPv6 temporary IPv6 address if conf.exists('dhcpv6-options temporary'): wifi['dhcpv6_temporary'] = conf.return_value('dhcpv6-options temporary') # Disable broadcast of SSID from access-point if conf.exists('disable-broadcast-ssid'): wifi['disable_broadcast_ssid'] = True # ignore link state changes on this interface if conf.exists('disable-link-detect'): wifi['disable_link_detect'] = 2 # Disassociate stations based on excessive transmission failures if conf.exists('expunge-failing-stations'): wifi['expunge_failing_stations'] = True # retrieve real hardware address if conf.exists('hw-id'): wifi['hw_id'] = conf.return_value('hw-id') # Isolate stations on the AP so they cannot see each other if conf.exists('isolate-stations'): wifi['isolate_stations'] = True # ARP filter configuration if conf.exists('ip disable-arp-filter'): wifi['ip_disable_arp_filter'] = 0 # ARP enable accept if conf.exists('ip enable-arp-accept'): wifi['ip_enable_arp_accept'] = 1 # ARP enable announce if conf.exists('ip enable-arp-announce'): wifi['ip_enable_arp_announce'] = 1 # Enable acquisition of IPv6 address using stateless autoconfig (SLAAC) if conf.exists('ipv6 address autoconf'): wifi['ipv6_autoconf'] = 1 # Get prefix for IPv6 addressing based on MAC address (EUI-64) if conf.exists('ipv6 address eui64'): wifi['ipv6_eui64_prefix'] = conf.return_value('ipv6 address eui64') # ARP enable ignore if conf.exists('ip enable-arp-ignore'): wifi['ip_enable_arp_ignore'] = 1 # Disable IPv6 forwarding on this interface if conf.exists('ipv6 disable-forwarding'): wifi['ipv6_forwarding'] = 0 # IPv6 Duplicate Address Detection (DAD) tries if conf.exists('ipv6 dup-addr-detect-transmits'): wifi['ipv6_dup_addr_detect'] = int(conf.return_value('ipv6 dup-addr-detect-transmits')) # Wireless physical device if conf.exists('physical-device'): wifi['phy'] = conf.return_value('physical-device') # Media Access Control (MAC) address if conf.exists('mac'): wifi['mac'] = conf.return_value('mac') # Maximum number of wireless radio stations if conf.exists('max-stations'): wifi['max_stations'] = conf.return_value('max-stations') # Management Frame Protection (MFP) according to IEEE 802.11w if conf.exists('mgmt-frame-protection'): wifi['mgmt_frame_protection'] = conf.return_value('mgmt-frame-protection') # Wireless radio mode if conf.exists('mode'): wifi['mode'] = conf.return_value('mode') # retrieve VRF instance if conf.exists('vrf'): wifi['vrf'] = conf.return_value('vrf') # Transmission power reduction in dBm if conf.exists('reduce-transmit-power'): wifi['reduce_transmit_power'] = conf.return_value('reduce-transmit-power') # WEP enabled? if conf.exists('security wep'): wifi['sec_wep'] = True # WEP encryption key(s) if conf.exists('security wep key'): wifi['sec_wep_key'] = conf.return_values('security wep key') # WPA enabled? if conf.exists('security wpa'): wifi['sec_wpa'] = True # WPA Cipher suite if conf.exists('security wpa cipher'): wifi['sec_wpa_cipher'] = conf.return_values('security wpa cipher') # WPA mode if conf.exists('security wpa mode'): wifi['sec_wpa_mode'] = conf.return_value('security wpa mode') # WPA default ciphers depend on WPA mode if not wifi['sec_wpa_cipher']: if wifi['sec_wpa_mode'] == 'wpa': wifi['sec_wpa_cipher'].append('TKIP') wifi['sec_wpa_cipher'].append('CCMP') elif wifi['sec_wpa_mode'] == 'wpa2': wifi['sec_wpa_cipher'].append('CCMP') elif wifi['sec_wpa_mode'] == 'both': wifi['sec_wpa_cipher'].append('CCMP') wifi['sec_wpa_cipher'].append('TKIP') # WPA personal shared pass phrase if conf.exists('security wpa passphrase'): wifi['sec_wpa_passphrase'] = conf.return_value('security wpa passphrase') # WPA RADIUS source address if conf.exists('security wpa radius source-address'): wifi['sec_wpa_radius_source'] = conf.return_value('security wpa radius source-address') # WPA RADIUS server for server in conf.list_nodes('security wpa radius server'): # set new configuration level conf.set_level(cfg_base + ' security wpa radius server ' + server) radius = { 'server' : server, 'acc_port' : '', 'disabled': False, 'port' : 1812, 'key' : '' } # RADIUS server port if conf.exists('port'): radius['port'] = int(conf.return_value('port')) # receive RADIUS accounting info if conf.exists('accounting'): radius['acc_port'] = radius['port'] + 1 # Check if RADIUS server was temporary disabled if conf.exists(['disable']): radius['disabled'] = True # RADIUS server shared-secret if conf.exists('key'): radius['key'] = conf.return_value('key') # append RADIUS server to list of servers wifi['sec_wpa_radius'].append(radius) # re-set configuration level to parse new nodes conf.set_level(cfg_base) # Wireless access-point service set identifier (SSID) if conf.exists('ssid'): wifi['ssid'] = conf.return_value('ssid') # Wireless device type for this interface if conf.exists('type'): tmp = conf.return_value('type') if tmp == 'access-point': tmp = 'ap' wifi['op_mode'] = tmp # re-set configuration level to parse new nodes conf.set_level(cfg_base) # Determine vif interfaces (currently effective) - to determine which # vif interface is no longer present and needs to be removed eff_intf = conf.list_effective_nodes('vif') act_intf = conf.list_nodes('vif') wifi['vif_remove'] = list_diff(eff_intf, act_intf) if conf.exists('vif'): for vif in conf.list_nodes('vif'): # set config level to vif interface conf.set_level(cfg_base + ' vif ' + vif) wifi['vif'].append(vlan_to_dict(conf)) # disable interface if conf.exists('disable'): wifi['disable'] = True # retrieve configured regulatory domain conf.set_level('system') if conf.exists('wifi-regulatory-domain'): wifi['country_code'] = conf.return_value('wifi-regulatory-domain') return wifi def verify(wifi): if wifi['deleted']: return None if wifi['op_mode'] != 'monitor' and not wifi['ssid']: raise ConfigError('SSID must be set for {}'.format(wifi['intf'])) if not wifi['phy']: raise ConfigError('You must specify physical-device') if wifi['op_mode'] == 'ap': c = Config() if not c.exists('system wifi-regulatory-domain'): raise ConfigError('Wireless regulatory domain is mandatory,\n' \ 'use "set system wifi-regulatory-domain".') if not wifi['channel']: raise ConfigError('Channel must be set for {}'.format(wifi['intf'])) if len(wifi['sec_wep_key']) > 4: raise ConfigError('No more then 4 WEP keys configurable') if wifi['cap_vht'] and not wifi['cap_ht']: raise ConfigError('Specify HT flags if you want to use VHT!') if wifi['cap_vht_beamform'] and wifi['cap_vht_antenna_cnt'] == 1: raise ConfigError('Cannot use beam forming with just one antenna!') if wifi['sec_wep'] and (len(wifi['sec_wep_key']) == 0): raise ConfigError('Missing WEP keys') if wifi['sec_wpa'] and not (wifi['sec_wpa_passphrase'] or wifi['sec_wpa_radius']): raise ConfigError('Misssing WPA key or RADIUS server') for radius in wifi['sec_wpa_radius']: if not radius['key']: raise ConfigError('Misssing RADIUS shared secret key for server: {}'.format(radius['server'])) vrf_name = wifi['vrf'] if vrf_name and vrf_name not in interfaces(): raise ConfigError(f'VRF "{vrf_name}" does not exist') # use common function to verify VLAN configuration verify_vlan_config(wifi) conf = Config() # Only one wireless interface per phy can be in station mode base = ['interfaces', 'wireless'] for phy in os.listdir('/sys/class/ieee80211'): stations = [] for wlan in conf.list_nodes(base): # the following node is mandatory if conf.exists(base + [wlan, 'physical-device', phy]): tmp = conf.return_value(base + [wlan, 'type']) if tmp == 'station': stations.append(wlan) if len(stations) > 1: raise ConfigError('Only one station per wireless physical interface possible!') return None def generate(wifi): # Prepare Jinja2 template loader from files tmpl_path = os.path.join(vyos_data_dir["data"], "templates", "wifi") fs_loader = FileSystemLoader(tmpl_path) env = Environment(loader=fs_loader) # always stop hostapd service first before reconfiguring it pidfile = get_pid('hostapd', wifi['intf']) if process_running(pidfile): cmd = 'start-stop-daemon' cmd += ' --stop ' cmd += ' --quiet' cmd += ' --oknodo' cmd += ' --pidfile ' + pidfile subprocess_cmd(cmd) # always stop wpa_supplicant service first before reconfiguring it pidfile = get_pid('wpa_supplicant', wifi['intf']) if process_running(pidfile): cmd = 'start-stop-daemon' cmd += ' --stop ' cmd += ' --quiet' cmd += ' --oknodo' cmd += ' --pidfile ' + pidfile subprocess_cmd(cmd) # Delete config files if interface is removed if wifi['deleted']: if os.path.isfile(get_conf_file('hostapd', wifi['intf'])): os.unlink(get_conf_file('hostapd', wifi['intf'])) if os.path.isfile(get_conf_file('wpa_supplicant', wifi['intf'])): os.unlink(get_conf_file('wpa_supplicant', wifi['intf'])) return None if not wifi['mac']: # http://wiki.stocksy.co.uk/wiki/Multiple_SSIDs_with_hostapd # generate locally administered MAC address from used phy interface with open('/sys/class/ieee80211/{}/addresses'.format(wifi['phy']), 'r') as f: # some PHYs tend to have multiple interfaces and thus supply multiple MAC # addresses - we only need the first one for our calculation tmp = f.readline().rstrip() tmp = EUI(tmp).value # mask last nibble from the MAC address tmp &= 0xfffffffffff0 # set locally administered bit in MAC address tmp |= 0x020000000000 # we now need to add an offset to our MAC address indicating this # subinterfaces index tmp += int(findall(r'\d+', wifi['intf'])[0]) # convert integer to "real" MAC address representation mac = EUI(hex(tmp).split('x')[-1]) # change dialect to use : as delimiter instead of - mac.dialect = mac_unix_expanded wifi['mac'] = str(mac) # render appropriate new config files depending on access-point or station mode if wifi['op_mode'] == 'ap': tmpl = env.get_template('hostapd.conf.tmpl') config_text = tmpl.render(wifi) with open(get_conf_file('hostapd', wifi['intf']), 'w') as f: f.write(config_text) elif wifi['op_mode'] == 'station': tmpl = env.get_template('wpa_supplicant.conf.tmpl') config_text = tmpl.render(wifi) with open(get_conf_file('wpa_supplicant', wifi['intf']), 'w') as f: f.write(config_text) return None def apply(wifi): if wifi['deleted']: w = WiFiIf(wifi['intf']) # delete interface w.remove() else: # WiFi interface needs to be created on-block (e.g. mode or physical # interface) instead of passing a ton of arguments, I just use a dict # that is managed by vyos.ifconfig conf = deepcopy(WiFiIf.get_config()) # Assign WiFi instance configuration parameters to config dict conf['phy'] = wifi['phy'] # Finally create the new interface w = WiFiIf(wifi['intf'], **conf) # assign/remove VRF w.set_vrf(wifi['vrf']) # update interface description used e.g. within SNMP w.set_alias(wifi['description']) # get DHCP config dictionary and update values opt = w.get_dhcp_options() if wifi['dhcp_client_id']: opt['client_id'] = wifi['dhcp_client_id'] if wifi['dhcp_hostname']: opt['hostname'] = wifi['dhcp_hostname'] if wifi['dhcp_vendor_class_id']: opt['vendor_class_id'] = wifi['dhcp_vendor_class_id'] # store DHCP config dictionary - used later on when addresses are aquired w.set_dhcp_options(opt) # get DHCPv6 config dictionary and update values opt = w.get_dhcpv6_options() if wifi['dhcpv6_prm_only']: opt['dhcpv6_prm_only'] = True if wifi['dhcpv6_temporary']: opt['dhcpv6_temporary'] = True # store DHCPv6 config dictionary - used later on when addresses are aquired w.set_dhcpv6_options(opt) # ignore link state changes w.set_link_detect(wifi['disable_link_detect']) # Change interface MAC address - re-set to real hardware address (hw-id) # if custom mac is removed if wifi['mac']: w.set_mac(wifi['mac']) elif wifi['hw_id']: w.set_mac(wifi['hw_id']) # configure ARP filter configuration w.set_arp_filter(wifi['ip_disable_arp_filter']) # configure ARP accept w.set_arp_accept(wifi['ip_enable_arp_accept']) # configure ARP announce w.set_arp_announce(wifi['ip_enable_arp_announce']) # configure ARP ignore w.set_arp_ignore(wifi['ip_enable_arp_ignore']) # IPv6 address autoconfiguration w.set_ipv6_autoconf(wifi['ipv6_autoconf']) # IPv6 EUI-based address w.set_ipv6_eui64_address(wifi['ipv6_eui64_prefix']) # IPv6 forwarding w.set_ipv6_forwarding(wifi['ipv6_forwarding']) # IPv6 Duplicate Address Detection (DAD) tries w.set_ipv6_dad_messages(wifi['ipv6_dup_addr_detect']) # Configure interface address(es) # - not longer required addresses get removed first # - newly addresses will be added second for addr in wifi['address_remove']: w.del_addr(addr) for addr in wifi['address']: w.add_addr(addr) # remove no longer required VLAN interfaces (vif) for vif in wifi['vif_remove']: e.del_vlan(vif) # create VLAN interfaces (vif) for vif in wifi['vif']: # QoS priority mapping can only be set during interface creation # so we delete the interface first if required. if vif['egress_qos_changed'] or vif['ingress_qos_changed']: try: # on system bootup the above condition is true but the interface # does not exists, which throws an exception, but that's legal e.del_vlan(vif['id']) except: pass vlan = e.add_vlan(vif['id']) apply_vlan_config(vlan, vif) # Enable/Disable interface - interface is always placed in # administrative down state in WiFiIf class if not wifi['disable']: w.set_admin_state('up') # Physical interface is now configured. Proceed by starting hostapd or # wpa_supplicant daemon. When type is monitor we can just skip this. if wifi['op_mode'] == 'ap': cmd = 'start-stop-daemon' cmd += ' --start ' cmd += ' --quiet' cmd += ' --oknodo' cmd += ' --pidfile ' + get_pid('hostapd', wifi['intf']) cmd += ' --exec /usr/sbin/hostapd' # now pass arguments to hostapd binary cmd += ' -- ' cmd += ' -B' cmd += ' -P ' + get_pid('hostapd', wifi['intf']) cmd += ' ' + get_conf_file('hostapd', wifi['intf']) # execute assembled command subprocess_cmd(cmd) elif wifi['op_mode'] == 'station': cmd = 'start-stop-daemon' cmd += ' --start ' cmd += ' --quiet' cmd += ' --oknodo' cmd += ' --pidfile ' + get_pid('hostapd', wifi['intf']) cmd += ' --exec /sbin/wpa_supplicant' # now pass arguments to hostapd binary cmd += ' -- ' cmd += ' -s -B -D nl80211' cmd += ' -P ' + get_pid('wpa_supplicant', wifi['intf']) cmd += ' -i ' + wifi['intf'] cmd += ' -c ' + get_conf_file('wpa_supplicant', wifi['intf']) # execute assembled command subprocess_cmd(cmd) return None if __name__ == '__main__': try: c = get_config() verify(c) generate(c) apply(c) except ConfigError as e: print(e) exit(1)