#!/usr/bin/env python3 # # Copyright (C) 2019-2020 VyOS maintainers and contributors # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License version 2 or later as # published by the Free Software Foundation. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . import os from sys import exit from re import findall from copy import deepcopy from netifaces import interfaces from netaddr import EUI, mac_unix_expanded from vyos.config import Config from vyos.configdict import list_diff, vlan_to_dict from vyos.ifconfig import WiFiIf, Section from vyos.ifconfig_vlan import apply_vlan_config, verify_vlan_config from vyos.template import render from vyos.util import chown, call from vyos.validate import is_member from vyos import ConfigError default_config_data = { 'address': [], 'address_remove': [], 'cap_ht' : False, 'cap_ht_40mhz_incapable' : False, 'cap_ht_powersave' : False, 'cap_ht_chan_set_width' : '', 'cap_ht_delayed_block_ack' : False, 'cap_ht_dsss_cck_40' : False, 'cap_ht_greenfield' : False, 'cap_ht_ldpc' : False, 'cap_ht_lsig_protection' : False, 'cap_ht_max_amsdu' : '', 'cap_ht_short_gi' : [], 'cap_ht_smps' : '', 'cap_ht_stbc_rx' : '', 'cap_ht_stbc_tx' : False, 'cap_req_ht' : False, 'cap_req_vht' : False, 'cap_vht' : False, 'cap_vht_antenna_cnt' : '', 'cap_vht_antenna_fixed' : False, 'cap_vht_beamform' : '', 'cap_vht_center_freq_1' : '', 'cap_vht_center_freq_2' : '', 'cap_vht_chan_set_width' : '', 'cap_vht_ldpc' : False, 'cap_vht_link_adaptation' : '', 'cap_vht_max_mpdu_exp' : '', 'cap_vht_max_mpdu' : '', 'cap_vht_short_gi' : [], 'cap_vht_stbc_rx' : '', 'cap_vht_stbc_tx' : False, 'cap_vht_tx_powersave' : False, 'cap_vht_vht_cf' : False, 'channel': '', 'country_code': '', 'description': '', 'deleted': False, 'dhcp_client_id': '', 'dhcp_hostname': '', 'dhcp_vendor_class_id': '', 'dhcpv6_prm_only': False, 'dhcpv6_temporary': False, 'disable': False, 'disable_broadcast_ssid' : False, 'disable_link_detect' : 1, 'expunge_failing_stations' : False, 'hw_id' : '', 'intf': '', 'isolate_stations' : False, 'ip_disable_arp_filter': 1, 'ip_enable_arp_accept': 0, 'ip_enable_arp_announce': 0, 'ip_enable_arp_ignore': 0, 'ipv6_autoconf': 0, 'ipv6_eui64_prefix': [], 'ipv6_eui64_prefix_remove': [], 'ipv6_forwarding': 1, 'ipv6_dup_addr_detect': 1, 'is_bridge_member': False, 'mac' : '', 'max_stations' : '', 'mgmt_frame_protection' : 'disabled', 'mode' : 'g', 'phy' : '', 'reduce_transmit_power' : '', 'sec_wep' : False, 'sec_wep_key' : [], 'sec_wpa' : False, 'sec_wpa_cipher' : [], 'sec_wpa_mode' : 'both', 'sec_wpa_passphrase' : '', 'sec_wpa_radius' : [], 'ssid' : '', 'op_mode' : 'monitor', 'vif': [], 'vif_remove': [], 'vrf': '' } def get_conf_file(conf_type, intf): cfg_dir = '/run/' + conf_type # create directory on demand if not os.path.exists(cfg_dir): os.makedirs(cfg_dir, 0o755) chown(cfg_dir, 'root', 'vyattacfg') cfg_file = cfg_dir + r'/{}.conf'.format(intf) return cfg_file def get_config(): wifi = deepcopy(default_config_data) conf = Config() # determine tagNode instance if 'VYOS_TAGNODE_VALUE' not in os.environ: raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified') wifi['intf'] = os.environ['VYOS_TAGNODE_VALUE'] # check if interface is member if a bridge wifi['is_bridge_member'] = is_member(conf, wifi['intf'], 'bridge') # check if wireless interface has been removed cfg_base = 'interfaces wireless ' + wifi['intf'] if not conf.exists(cfg_base): wifi['deleted'] = True # we can not bail out early as wireless interface can not be removed # Kernel will complain with: RTNETLINK answers: Operation not supported. # Thus we need to remove individual settings return wifi # set new configuration level conf.set_level(cfg_base) # retrieve configured interface addresses if conf.exists('address'): wifi['address'] = conf.return_values('address') # get interface addresses (currently effective) - to determine which # address is no longer valid and needs to be removed eff_addr = conf.return_effective_values('address') wifi['address_remove'] = list_diff(eff_addr, wifi['address']) # 40MHz intolerance, use 20MHz only if conf.exists('capabilities ht 40mhz-incapable'): wifi['cap_ht'] = True wifi['cap_ht_40mhz_incapable'] = True # WMM-PS Unscheduled Automatic Power Save Delivery [U-APSD] if conf.exists('capabilities ht auto-powersave'): wifi['cap_ht'] = True wifi['cap_ht_powersave'] = True # Supported channel set width if conf.exists('capabilities ht channel-set-width'): wifi['cap_ht'] = True wifi['cap_ht_chan_set_width'] = conf.return_values('capabilities ht channel-set-width') # HT-delayed Block Ack if conf.exists('capabilities ht delayed-block-ack'): wifi['cap_ht'] = True wifi['cap_ht_delayed_block_ack'] = True # DSSS/CCK Mode in 40 MHz if conf.exists('capabilities ht dsss-cck-40'): wifi['cap_ht'] = True wifi['cap_ht_dsss_cck_40'] = True # HT-greenfield capability if conf.exists('capabilities ht greenfield'): wifi['cap_ht'] = True wifi['cap_ht_greenfield'] = True # LDPC coding capability if conf.exists('capabilities ht ldpc'): wifi['cap_ht'] = True wifi['cap_ht_ldpc'] = True # L-SIG TXOP protection capability if conf.exists('capabilities ht lsig-protection'): wifi['cap_ht'] = True wifi['cap_ht_lsig_protection'] = True # Set Maximum A-MSDU length if conf.exists('capabilities ht max-amsdu'): wifi['cap_ht'] = True wifi['cap_ht_max_amsdu'] = conf.return_value('capabilities ht max-amsdu') # Short GI capabilities if conf.exists('capabilities ht short-gi'): wifi['cap_ht'] = True wifi['cap_ht_short_gi'] = conf.return_values('capabilities ht short-gi') # Spatial Multiplexing Power Save (SMPS) settings if conf.exists('capabilities ht smps'): wifi['cap_ht'] = True wifi['cap_ht_smps'] = conf.return_value('capabilities ht smps') # Support for receiving PPDU using STBC (Space Time Block Coding) if conf.exists('capabilities ht stbc rx'): wifi['cap_ht'] = True wifi['cap_ht_stbc_rx'] = conf.return_value('capabilities ht stbc rx') # Support for sending PPDU using STBC (Space Time Block Coding) if conf.exists('capabilities ht stbc tx'): wifi['cap_ht'] = True wifi['cap_ht_stbc_tx'] = True # Require stations to support HT PHY (reject association if they do not) if conf.exists('capabilities require-ht'): wifi['cap_req_ht'] = True # Require stations to support VHT PHY (reject association if they do not) if conf.exists('capabilities require-vht'): wifi['cap_req_vht'] = True # Number of antennas on this card if conf.exists('capabilities vht antenna-count'): wifi['cap_vht'] = True wifi['cap_vht_antenna_cnt'] = conf.return_value('capabilities vht antenna-count') # set if antenna pattern does not change during the lifetime of an association if conf.exists('capabilities vht antenna-pattern-fixed'): wifi['cap_vht'] = True wifi['cap_vht_antenna_fixed'] = True # Beamforming capabilities if conf.exists('capabilities vht beamform'): wifi['cap_vht'] = True wifi['cap_vht_beamform'] = conf.return_values('capabilities vht beamform') # VHT operating channel center frequency - center freq 1 (for use with 80, 80+80 and 160 modes) if conf.exists('capabilities vht center-channel-freq freq-1'): wifi['cap_vht'] = True wifi['cap_vht_center_freq_1'] = conf.return_value('capabilities vht center-channel-freq freq-1') # VHT operating channel center frequency - center freq 2 (for use with the 80+80 mode) if conf.exists('capabilities vht center-channel-freq freq-2'): wifi['cap_vht'] = True wifi['cap_vht_center_freq_2'] = conf.return_value('capabilities vht center-channel-freq freq-2') # VHT operating Channel width if conf.exists('capabilities vht channel-set-width'): wifi['cap_vht'] = True wifi['cap_vht_chan_set_width'] = conf.return_value('capabilities vht channel-set-width') # LDPC coding capability if conf.exists('capabilities vht ldpc'): wifi['cap_vht'] = True wifi['cap_vht_ldpc'] = True # VHT link adaptation capabilities if conf.exists('capabilities vht link-adaptation'): wifi['cap_vht'] = True wifi['cap_vht_link_adaptation'] = conf.return_value('capabilities vht link-adaptation') # Set the maximum length of A-MPDU pre-EOF padding that the station can receive if conf.exists('capabilities vht max-mpdu-exp'): wifi['cap_vht'] = True wifi['cap_vht_max_mpdu_exp'] = conf.return_value('capabilities vht max-mpdu-exp') # Increase Maximum MPDU length if conf.exists('capabilities vht max-mpdu'): wifi['cap_vht'] = True wifi['cap_vht_max_mpdu'] = conf.return_value('capabilities vht max-mpdu') # Increase Maximum MPDU length if conf.exists('capabilities vht short-gi'): wifi['cap_vht'] = True wifi['cap_vht_short_gi'] = conf.return_values('capabilities vht short-gi') # Support for receiving PPDU using STBC (Space Time Block Coding) if conf.exists('capabilities vht stbc rx'): wifi['cap_vht'] = True wifi['cap_vht_stbc_rx'] = conf.return_value('capabilities vht stbc rx') # Support for the transmission of at least 2x1 STBC (Space Time Block Coding) if conf.exists('capabilities vht stbc tx'): wifi['cap_vht'] = True wifi['cap_vht_stbc_tx'] = True # Support for VHT TXOP Power Save Mode if conf.exists('capabilities vht tx-powersave'): wifi['cap_vht'] = True wifi['cap_vht_tx_powersave'] = True # STA supports receiving a VHT variant HT Control field if conf.exists('capabilities vht vht-cf'): wifi['cap_vht'] = True wifi['cap_vht_vht_cf'] = True # Wireless radio channel if conf.exists('channel'): wifi['channel'] = conf.return_value('channel') # retrieve interface description if conf.exists('description'): wifi['description'] = conf.return_value('description') # get DHCP client identifier if conf.exists('dhcp-options client-id'): wifi['dhcp_client_id'] = conf.return_value('dhcp-options client-id') # DHCP client host name (overrides the system host name) if conf.exists('dhcp-options host-name'): wifi['dhcp_hostname'] = conf.return_value('dhcp-options host-name') # DHCP client vendor identifier if conf.exists('dhcp-options vendor-class-id'): wifi['dhcp_vendor_class_id'] = conf.return_value('dhcp-options vendor-class-id') # DHCPv6 only acquire config parameters, no address if conf.exists('dhcpv6-options parameters-only'): wifi['dhcpv6_prm_only'] = conf.return_value('dhcpv6-options parameters-only') # DHCPv6 temporary IPv6 address if conf.exists('dhcpv6-options temporary'): wifi['dhcpv6_temporary'] = conf.return_value('dhcpv6-options temporary') # Disable broadcast of SSID from access-point if conf.exists('disable-broadcast-ssid'): wifi['disable_broadcast_ssid'] = True # ignore link state changes on this interface if conf.exists('disable-link-detect'): wifi['disable_link_detect'] = 2 # Disassociate stations based on excessive transmission failures if conf.exists('expunge-failing-stations'): wifi['expunge_failing_stations'] = True # retrieve real hardware address if conf.exists('hw-id'): wifi['hw_id'] = conf.return_value('hw-id') # Isolate stations on the AP so they cannot see each other if conf.exists('isolate-stations'): wifi['isolate_stations'] = True # ARP filter configuration if conf.exists('ip disable-arp-filter'): wifi['ip_disable_arp_filter'] = 0 # ARP enable accept if conf.exists('ip enable-arp-accept'): wifi['ip_enable_arp_accept'] = 1 # ARP enable announce if conf.exists('ip enable-arp-announce'): wifi['ip_enable_arp_announce'] = 1 # Enable acquisition of IPv6 address using stateless autoconfig (SLAAC) if conf.exists('ipv6 address autoconf'): wifi['ipv6_autoconf'] = 1 # Get prefixes for IPv6 addressing based on MAC address (EUI-64) if conf.exists('ipv6 address eui64'): wifi['ipv6_eui64_prefix'] = conf.return_values('ipv6 address eui64') # Determine currently effective EUI64 addresses - to determine which # address is no longer valid and needs to be removed eff_addr = conf.return_effective_values('ipv6 address eui64') wifi['ipv6_eui64_prefix_remove'] = list_diff(eff_addr, wifi['ipv6_eui64_prefix']) # Remove the default link-local address if set or if member of a bridge if conf.exists('ipv6 address no-default-link-local') or wifi['is_bridge_member']: wifi['ipv6_eui64_prefix_remove'].append('fe80::/64') else: # add the link-local by default to make IPv6 work wifi['ipv6_eui64_prefix'].append('fe80::/64') # ARP enable ignore if conf.exists('ip enable-arp-ignore'): wifi['ip_enable_arp_ignore'] = 1 # Disable IPv6 forwarding on this interface if conf.exists('ipv6 disable-forwarding'): wifi['ipv6_forwarding'] = 0 # IPv6 Duplicate Address Detection (DAD) tries if conf.exists('ipv6 dup-addr-detect-transmits'): wifi['ipv6_dup_addr_detect'] = int(conf.return_value('ipv6 dup-addr-detect-transmits')) # Wireless physical device if conf.exists('physical-device'): wifi['phy'] = conf.return_value('physical-device') # Media Access Control (MAC) address if conf.exists('mac'): wifi['mac'] = conf.return_value('mac') # Find out if MAC has changed - if so, we need to delete all IPv6 EUI64 addresses # before re-adding them if ( wifi['mac'] and wifi['intf'] in Section.interfaces(section='wireless') and wifi['mac'] != WiFiIf(wifi['intf'], create=False).get_mac() ): wifi['ipv6_eui64_prefix_remove'] += wifi['ipv6_eui64_prefix'] # Maximum number of wireless radio stations if conf.exists('max-stations'): wifi['max_stations'] = conf.return_value('max-stations') # Management Frame Protection (MFP) according to IEEE 802.11w if conf.exists('mgmt-frame-protection'): wifi['mgmt_frame_protection'] = conf.return_value('mgmt-frame-protection') # Wireless radio mode if conf.exists('mode'): wifi['mode'] = conf.return_value('mode') # retrieve VRF instance if conf.exists('vrf'): wifi['vrf'] = conf.return_value('vrf') # Transmission power reduction in dBm if conf.exists('reduce-transmit-power'): wifi['reduce_transmit_power'] = conf.return_value('reduce-transmit-power') # WEP enabled? if conf.exists('security wep'): wifi['sec_wep'] = True # WEP encryption key(s) if conf.exists('security wep key'): wifi['sec_wep_key'] = conf.return_values('security wep key') # WPA enabled? if conf.exists('security wpa'): wifi['sec_wpa'] = True # WPA Cipher suite if conf.exists('security wpa cipher'): wifi['sec_wpa_cipher'] = conf.return_values('security wpa cipher') # WPA mode if conf.exists('security wpa mode'): wifi['sec_wpa_mode'] = conf.return_value('security wpa mode') # WPA default ciphers depend on WPA mode if not wifi['sec_wpa_cipher']: if wifi['sec_wpa_mode'] == 'wpa': wifi['sec_wpa_cipher'].append('TKIP') wifi['sec_wpa_cipher'].append('CCMP') elif wifi['sec_wpa_mode'] == 'wpa2': wifi['sec_wpa_cipher'].append('CCMP') elif wifi['sec_wpa_mode'] == 'both': wifi['sec_wpa_cipher'].append('CCMP') wifi['sec_wpa_cipher'].append('TKIP') # WPA Group Cipher suite if conf.exists('security wpa group-cipher'): wifi['sec_wpa_group_cipher'] = conf.return_values('security wpa group-cipher') # WPA personal shared pass phrase if conf.exists('security wpa passphrase'): wifi['sec_wpa_passphrase'] = conf.return_value('security wpa passphrase') # WPA RADIUS source address if conf.exists('security wpa radius source-address'): wifi['sec_wpa_radius_source'] = conf.return_value('security wpa radius source-address') # WPA RADIUS server for server in conf.list_nodes('security wpa radius server'): # set new configuration level conf.set_level(cfg_base + ' security wpa radius server ' + server) radius = { 'server' : server, 'acc_port' : '', 'disabled': False, 'port' : 1812, 'key' : '' } # RADIUS server port if conf.exists('port'): radius['port'] = int(conf.return_value('port')) # receive RADIUS accounting info if conf.exists('accounting'): radius['acc_port'] = radius['port'] + 1 # Check if RADIUS server was temporary disabled if conf.exists(['disable']): radius['disabled'] = True # RADIUS server shared-secret if conf.exists('key'): radius['key'] = conf.return_value('key') # append RADIUS server to list of servers wifi['sec_wpa_radius'].append(radius) # re-set configuration level to parse new nodes conf.set_level(cfg_base) # Wireless access-point service set identifier (SSID) if conf.exists('ssid'): wifi['ssid'] = conf.return_value('ssid') # Wireless device type for this interface if conf.exists('type'): tmp = conf.return_value('type') if tmp == 'access-point': tmp = 'ap' wifi['op_mode'] = tmp # re-set configuration level to parse new nodes conf.set_level(cfg_base) # Determine vif interfaces (currently effective) - to determine which # vif interface is no longer present and needs to be removed eff_intf = conf.list_effective_nodes('vif') act_intf = conf.list_nodes('vif') wifi['vif_remove'] = list_diff(eff_intf, act_intf) if conf.exists('vif'): for vif in conf.list_nodes('vif'): # set config level to vif interface conf.set_level(cfg_base + ' vif ' + vif) wifi['vif'].append(vlan_to_dict(conf)) # disable interface if conf.exists('disable'): wifi['disable'] = True # retrieve configured regulatory domain conf.set_level('system') if conf.exists('wifi-regulatory-domain'): wifi['country_code'] = conf.return_value('wifi-regulatory-domain') return wifi def verify(wifi): if wifi['deleted']: if wifi['is_bridge_member']: interface = wifi['intf'] bridge = wifi['is_bridge_member'] raise ConfigError(f'Interface "{interface}" can not be deleted as it belongs to bridge "{bridge}"!') return None if wifi['op_mode'] != 'monitor' and not wifi['ssid']: raise ConfigError('SSID must be set for {}'.format(wifi['intf'])) if not wifi['phy']: raise ConfigError('You must specify physical-device') if not wifi['mode']: raise ConfigError('You must specify a WiFi mode') if wifi['op_mode'] == 'ap': c = Config() if not c.exists('system wifi-regulatory-domain'): raise ConfigError('Wireless regulatory domain is mandatory,\n' \ 'use "set system wifi-regulatory-domain".') if not wifi['channel']: raise ConfigError('Channel must be set for {}'.format(wifi['intf'])) if len(wifi['sec_wep_key']) > 4: raise ConfigError('No more then 4 WEP keys configurable') if wifi['cap_vht'] and not wifi['cap_ht']: raise ConfigError('Specify HT flags if you want to use VHT!') if wifi['cap_vht_beamform'] and wifi['cap_vht_antenna_cnt'] == 1: raise ConfigError('Cannot use beam forming with just one antenna!') if wifi['cap_vht_beamform'] == 'single-user-beamformer' and wifi['cap_vht_antenna_cnt'] < 3: # Nasty Gotcha: see https://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf lines 692-705 raise ConfigError('Single-user beam former requires at least 3 antennas!') if wifi['sec_wep'] and (len(wifi['sec_wep_key']) == 0): raise ConfigError('Missing WEP keys') if wifi['sec_wpa'] and not (wifi['sec_wpa_passphrase'] or wifi['sec_wpa_radius']): raise ConfigError('Misssing WPA key or RADIUS server') for radius in wifi['sec_wpa_radius']: if not radius['key']: raise ConfigError('Misssing RADIUS shared secret key for server: {}'.format(radius['server'])) if ( wifi['is_bridge_member'] and ( wifi['address'] or wifi['ipv6_eui64_prefix'] or wifi['ipv6_autoconf'] ) ): raise ConfigError(( f'Cannot assign address to interface "{wifi["intf"]}" ' f'as it is a member of bridge "{wifi["is_bridge_member"]}"!')) if wifi['vrf']: if wifi['vrf'] not in interfaces(): raise ConfigError(f'VRF "{wifi["vrf"]}" does not exist') if wifi['is_bridge_member']: raise ConfigError(( f'Interface "{wifi["intf"]}" cannot be member of VRF ' f'"{wifi["vrf"]}" and bridge {wifi["is_bridge_member"]} ' f'at the same time!')) # use common function to verify VLAN configuration verify_vlan_config(wifi) conf = Config() # Only one wireless interface per phy can be in station mode base = ['interfaces', 'wireless'] for phy in os.listdir('/sys/class/ieee80211'): stations = [] for wlan in conf.list_nodes(base): # the following node is mandatory if conf.exists(base + [wlan, 'physical-device', phy]): tmp = conf.return_value(base + [wlan, 'type']) if tmp == 'station': stations.append(wlan) if len(stations) > 1: raise ConfigError('Only one station per wireless physical interface possible!') return None def generate(wifi): interface = wifi['intf'] # always stop hostapd service first before reconfiguring it call(f'systemctl stop hostapd@{interface}.service') # always stop wpa_supplicant service first before reconfiguring it call(f'systemctl stop wpa_supplicant@{interface}.service') # Delete config files if interface is removed if wifi['deleted']: if os.path.isfile(get_conf_file('hostapd', interface)): os.unlink(get_conf_file('hostapd', interface)) if os.path.isfile(get_conf_file('wpa_supplicant', interface)): os.unlink(get_conf_file('wpa_supplicant', interface)) return None if not wifi['mac']: # http://wiki.stocksy.co.uk/wiki/Multiple_SSIDs_with_hostapd # generate locally administered MAC address from used phy interface with open('/sys/class/ieee80211/{}/addresses'.format(wifi['phy']), 'r') as f: # some PHYs tend to have multiple interfaces and thus supply multiple MAC # addresses - we only need the first one for our calculation tmp = f.readline().rstrip() tmp = EUI(tmp).value # mask last nibble from the MAC address tmp &= 0xfffffffffff0 # set locally administered bit in MAC address tmp |= 0x020000000000 # we now need to add an offset to our MAC address indicating this # subinterfaces index tmp += int(findall(r'\d+', interface)[0]) # convert integer to "real" MAC address representation mac = EUI(hex(tmp).split('x')[-1]) # change dialect to use : as delimiter instead of - mac.dialect = mac_unix_expanded wifi['mac'] = str(mac) # render appropriate new config files depending on access-point or station mode if wifi['op_mode'] == 'ap': conf = get_conf_file('hostapd', interface) render(conf, 'wifi/hostapd.conf.tmpl', wifi) elif wifi['op_mode'] == 'station': conf = get_conf_file('wpa_supplicant', interface) render(conf, 'wifi/wpa_supplicant.conf.tmpl', wifi) return None def apply(wifi): interface = wifi['intf'] if wifi['deleted']: w = WiFiIf(interface) # delete interface w.remove() else: # WiFi interface needs to be created on-block (e.g. mode or physical # interface) instead of passing a ton of arguments, I just use a dict # that is managed by vyos.ifconfig conf = deepcopy(WiFiIf.get_config()) # Assign WiFi instance configuration parameters to config dict conf['phy'] = wifi['phy'] # Finally create the new interface w = WiFiIf(interface, **conf) # assign/remove VRF (ONLY when not a member of a bridge, # otherwise 'nomaster' removes it from it) if not wifi['is_bridge_member']: w.set_vrf(wifi['vrf']) # update interface description used e.g. within SNMP w.set_alias(wifi['description']) if wifi['dhcp_client_id']: w.dhcp.v4.options['client_id'] = wifi['dhcp_client_id'] if wifi['dhcp_hostname']: w.dhcp.v4.options['hostname'] = wifi['dhcp_hostname'] if wifi['dhcp_vendor_class_id']: w.dhcp.v4.options['vendor_class_id'] = wifi['dhcp_vendor_class_id'] if wifi['dhcpv6_prm_only']: w.dhcp.v6.options['dhcpv6_prm_only'] = True if wifi['dhcpv6_temporary']: w.dhcp.v6.options['dhcpv6_temporary'] = True # ignore link state changes w.set_link_detect(wifi['disable_link_detect']) # Delete old IPv6 EUI64 addresses before changing MAC for addr in wifi['ipv6_eui64_prefix_remove']: w.del_ipv6_eui64_address(addr) # Change interface MAC address - re-set to real hardware address (hw-id) # if custom mac is removed if wifi['mac']: w.set_mac(wifi['mac']) elif wifi['hw_id']: w.set_mac(wifi['hw_id']) # Add IPv6 EUI-based addresses for addr in wifi['ipv6_eui64_prefix']: w.add_ipv6_eui64_address(addr) # configure ARP filter configuration w.set_arp_filter(wifi['ip_disable_arp_filter']) # configure ARP accept w.set_arp_accept(wifi['ip_enable_arp_accept']) # configure ARP announce w.set_arp_announce(wifi['ip_enable_arp_announce']) # configure ARP ignore w.set_arp_ignore(wifi['ip_enable_arp_ignore']) # IPv6 address autoconfiguration w.set_ipv6_autoconf(wifi['ipv6_autoconf']) # IPv6 forwarding w.set_ipv6_forwarding(wifi['ipv6_forwarding']) # IPv6 Duplicate Address Detection (DAD) tries w.set_ipv6_dad_messages(wifi['ipv6_dup_addr_detect']) # Configure interface address(es) # - not longer required addresses get removed first # - newly addresses will be added second for addr in wifi['address_remove']: w.del_addr(addr) for addr in wifi['address']: w.add_addr(addr) # remove no longer required VLAN interfaces (vif) for vif in wifi['vif_remove']: w.del_vlan(vif) # create VLAN interfaces (vif) for vif in wifi['vif']: # QoS priority mapping can only be set during interface creation # so we delete the interface first if required. if vif['egress_qos_changed'] or vif['ingress_qos_changed']: try: # on system bootup the above condition is true but the interface # does not exists, which throws an exception, but that's legal w.del_vlan(vif['id']) except: pass vlan = w.add_vlan(vif['id']) apply_vlan_config(vlan, vif) # Enable/Disable interface - interface is always placed in # administrative down state in WiFiIf class if not wifi['disable']: w.set_admin_state('up') # Physical interface is now configured. Proceed by starting hostapd or # wpa_supplicant daemon. When type is monitor we can just skip this. if wifi['op_mode'] == 'ap': call(f'systemctl start hostapd@{interface}.service') elif wifi['op_mode'] == 'station': call(f'systemctl start wpa_supplicant@{interface}.service') return None if __name__ == '__main__': try: c = get_config() verify(c) generate(c) apply(c) except ConfigError as e: print(e) exit(1)