#!/usr/bin/env python3 # # Copyright (C) 2018-2020 VyOS maintainers and contributors # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License version 2 or later as # published by the Free Software Foundation. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . import os import re from jinja2 import FileSystemLoader, Environment from socket import socket, AF_INET, SOCK_STREAM from sys import exit from time import sleep from vyos.config import Config from vyos.defaults import directories as vyos_data_dir from vyos import ConfigError from vyos.util import run pidfile = r'/var/run/accel_pppoe.pid' pppoe_cnf_dir = r'/etc/accel-ppp/pppoe' chap_secrets = pppoe_cnf_dir + '/chap-secrets' pppoe_conf = pppoe_cnf_dir + '/pppoe.config' # accel-pppd -d -c /etc/accel-ppp/pppoe/pppoe.config -p # /var/run/accel_pppoe.pid # config path creation if not os.path.exists(pppoe_cnf_dir): os.makedirs(pppoe_cnf_dir) # # depending on hw and threads, daemon needs a little to start # if it takes longer than 100 * 0.5 secs, exception is being raised # not sure if that's the best way to check it, but it worked so far quite well # def _chk_con(): cnt = 0 s = socket(AF_INET, SOCK_STREAM) while True: try: s.connect(("127.0.0.1", 2001)) break except ConnectionRefusedError: sleep(0.5) cnt += 1 if cnt == 100: raise("failed to start pppoe server") def _accel_cmd(command): return run(f'/usr/bin/accel-cmd {command}') def get_config(): c = Config() if not c.exists('service pppoe-server'): return None config_data = { 'concentrator': 'vyos-ac', 'authentication': { 'local-users': { }, 'mode': 'local', 'radiussrv': {}, 'radiusopt': {} }, 'client_ip_pool': '', 'client_ip_subnets': [], 'client_ipv6_pool': {}, 'interface': {}, 'ppp_gw': '', 'svc_name': [], 'dns': [], 'dnsv6': [], 'wins': [], 'mtu': '1492', 'ppp_options': {}, 'limits': {}, 'snmp': 'disable', 'sesscrtl': 'replace', 'pado_delay': '' } c.set_level(['service', 'pppoe-server']) # general options if c.exists(['access-concentrator']): config_data['concentrator'] = c.return_value(['access-concentrator']) if c.exists(['service-name']): config_data['svc_name'] = c.return_values(['service-name']) if c.exists(['interface']): for intfc in c.list_nodes(['interface']): config_data['interface'][intfc] = {'vlans': []} if c.exists(['interface', intfc, 'vlan-id']): config_data['interface'][intfc]['vlans'] += c.return_values( ['interface', intfc, 'vlan-id']) if c.exists(['interface', intfc, 'vlan-range']): config_data['interface'][intfc]['vlans'] += c.return_values( ['interface', intfc, 'vlan-range']) if c.exists(['local-ip']): config_data['ppp_gw'] = c.return_value(['local-ip']) if c.exists(['dns-servers']): if c.return_value(['dns-servers', 'server-1']): config_data['dns'].append( c.return_value(['dns-servers', 'server-1'])) if c.return_value(['dns-servers', 'server-2']): config_data['dns'].append( c.return_value(['dns-servers', 'server-2'])) if c.exists(['dnsv6-servers']): if c.return_value(['dnsv6-servers', 'server-1']): config_data['dnsv6'].append( c.return_value(['dnsv6-servers', 'server-1'])) if c.return_value(['dnsv6-servers', 'server-2']): config_data['dnsv6'].append( c.return_value(['dnsv6-servers', 'server-2'])) if c.return_value(['dnsv6-servers', 'server-3']): config_data['dnsv6'].append( c.return_value(['dnsv6-servers', 'server-3'])) if c.exists(['wins-servers']): if c.return_value(['wins-servers', 'server-1']): config_data['wins'].append( c.return_value(['wins-servers', 'server-1'])) if c.return_value(['wins-servers', 'server-2']): config_data['wins'].append( c.return_value(['wins-servers', 'server-2'])) if c.exists(['client-ip-pool']): if c.exists(['client-ip-pool', 'start']): config_data['client_ip_pool'] = c.return_value( ['client-ip-pool start']) if c.exists(['client-ip-pool stop']): config_data['client_ip_pool'] += '-' + re.search( '[0-9]+$', c.return_value(['client-ip-pool', 'stop'])).group(0) else: raise ConfigError('client ip pool stop required') if c.exists(['client-ip-pool', 'subnet']): config_data['client_ip_subnets'] = c.return_values( ['client-ip-pool', 'subnet']) if c.exists(['client-ipv6-pool', 'prefix']): config_data['client_ipv6_pool'][ 'prefix'] = c.return_values(['client-ipv6-pool', 'prefix']) if c.exists(['client-ipv6-pool', 'delegate-prefix']): config_data['client_ipv6_pool']['delegate-prefix'] = c.return_values( ['client-ipv6-pool', 'delegate-prefix']) if c.exists(['limits']): if c.exists(['limits', 'burst']): config_data['limits']['burst'] = str( c.return_value(['limits', 'burst'])) if c.exists(['limits', 'timeout']): config_data['limits']['timeout'] = str( c.return_value(['limits', 'timeout'])) if c.exists(['limits', 'connection-limit']): config_data['limits']['conn-limit'] = str( c.return_value(['limits', 'connection-limit'])) if c.exists(['snmp']): config_data['snmp'] = 'enable' if c.exists(['snmp', 'master-agent']): config_data['snmp'] = 'enable-ma' # authentication mode local if not c.exists(['authentication', 'mode']): raise ConfigError('pppoe-server authentication mode required') if c.exists(['authentication', 'mode', 'local']): if c.exists(['authentication', 'local-users', 'username']): for usr in c.list_nodes(['authentication', 'local-users', 'username']): config_data['authentication']['local-users'].update( { usr: { 'passwd': None, 'state': 'enabled', 'ip': '*', 'upload': None, 'download': None } } ) if c.exists(['authentication', 'local-users', 'username', usr, 'password']): config_data['authentication']['local-users'][usr]['passwd'] = c.return_value( ['authentication', 'local-users', 'username', usr, 'password']) if c.exists(['authentication', 'local-users', 'username', usr, 'disable']): config_data['authentication'][ 'local-users'][usr]['state'] = 'disable' if c.exists(['authentication', 'local-users', 'username', usr, 'static-ip']): config_data['authentication']['local-users'][usr]['ip'] = c.return_value( ['authentication', 'local-users', 'username', usr, 'static-ip']) if c.exists(['authentication', 'local-users', 'username', usr, 'rate-limit', 'download']): config_data['authentication']['local-users'][usr]['download'] = c.return_value( ['authentication', 'local-users', 'username', usr, 'rate-limit', 'download']) if c.exists(['authentication', 'local-users', 'username', usr, 'rate-limit', 'upload']): config_data['authentication']['local-users'][usr]['upload'] = c.return_value( ['authentication', 'local-users', 'username', usr, 'rate-limit', 'upload']) # authentication mode radius servers and settings if c.exists(['authentication', 'mode', 'radius']): config_data['authentication']['mode'] = 'radius' rsrvs = c.list_nodes(['authentication', 'radius-server']) for rsrv in rsrvs: if c.return_value(['authentication', 'radius-server', rsrv, 'fail-time']) == None: ftime = '0' else: ftime = str( c.return_value(['authentication', 'radius-server', rsrv, 'fail-time'])) if c.return_value(['authentication', 'radius-server', rsrv, 'req-limit']) == None: reql = '0' else: reql = str( c.return_value(['authentication', 'radius-server', rsrv, 'req-limit'])) config_data['authentication']['radiussrv'].update( { rsrv: { 'secret': c.return_value(['authentication', 'radius-server', rsrv, 'secret']), 'fail-time': ftime, 'req-limit': reql } } ) # advanced radius-setting if c.exists(['authentication', 'radius-settings']): if c.exists(['authentication', 'radius-settings', 'acct-timeout']): config_data['authentication']['radiusopt']['acct-timeout'] = c.return_value( ['authentication', 'radius-settings', 'acct-timeout']) if c.exists(['authentication', 'radius-settings', 'max-try']): config_data['authentication']['radiusopt'][ 'max-try'] = c.return_value(['authentication', 'radius-settings', 'max-try']) if c.exists(['authentication', 'radius-settings', 'timeout']): config_data['authentication']['radiusopt'][ 'timeout'] = c.return_value(['authentication', 'radius-settings', 'timeout']) if c.exists(['authentication', 'radius-settings', 'nas-identifier']): config_data['authentication']['radiusopt']['nas-id'] = c.return_value( ['authentication', 'radius-settings', 'nas-identifier']) if c.exists(['authentication', 'radius-settings', 'nas-ip-address']): config_data['authentication']['radiusopt']['nas-ip'] = c.return_value( ['authentication', 'radius-settings', 'nas-ip-address']) if c.exists(['authentication', 'radius-settings', 'dae-server']): config_data['authentication']['radiusopt'].update( { 'dae-srv': { 'ip-addr': c.return_value(['authentication', 'radius-settings', 'dae-server', 'ip-address']), 'port': c.return_value(['authentication', 'radius-settings', 'dae-server', 'port']), 'secret': str(c.return_value(['authentication', 'radius-settings', 'dae-server', 'secret'])) } } ) # filter-id is the internal accel default if attribute is empty # set here as default for visibility which may change in the future if c.exists(['authentication', 'radius-settings', 'rate-limit', 'enable']): if not c.exists(['authentication', 'radius-settings', 'rate-limit', 'attribute']): config_data['authentication']['radiusopt']['shaper'] = { 'attr': 'Filter-Id' } else: config_data['authentication']['radiusopt']['shaper'] = { 'attr': c.return_value(['authentication', 'radius-settings', 'rate-limit', 'attribute']) } if c.exists(['authentication', 'radius-settings', 'rate-limit', 'vendor']): config_data['authentication']['radiusopt']['shaper'][ 'vendor'] = c.return_value(['authentication', 'radius-settings', 'rate-limit', 'vendor']) if c.exists(['mtu']): config_data['mtu'] = c.return_value(['mtu']) # ppp_options ppp_options = {} if c.exists(['ppp-options']): if c.exists(['ppp-options', 'ccp']): ppp_options['ccp'] = c.return_value(['ppp-options', 'ccp']) if c.exists(['ppp-options', 'min-mtu']): ppp_options['min-mtu'] = c.return_value(['ppp-options', 'min-mtu']) if c.exists(['ppp-options', 'mru']): ppp_options['mru'] = c.return_value(['ppp-options', 'mru']) if c.exists(['ppp-options', 'mppe deny']): ppp_options['mppe'] = 'deny' if c.exists(['ppp-options', 'mppe', 'require']): ppp_options['mppe'] = 'require' if c.exists(['ppp-options', 'mppe', 'prefer']): ppp_options['mppe'] = 'prefer' if c.exists(['ppp-options', 'lcp-echo-failure']): ppp_options['lcp-echo-failure'] = c.return_value( ['ppp-options', 'lcp-echo-failure']) if c.exists(['ppp-options', 'lcp-echo-interval']): ppp_options['lcp-echo-interval'] = c.return_value( ['ppp-options', 'lcp-echo-interval']) if c.exists(['ppp-options', 'ipv4']): ppp_options['ipv4'] = c.return_value(['ppp-options', 'ipv4']) if c.exists(['ppp-options', 'ipv6']): ppp_options['ipv6'] = c.return_value(['ppp-options', 'ipv6']) if c.exists(['ppp-options', 'ipv6-accept-peer-intf-id']): ppp_options['ipv6-accept-peer-intf-id'] = 1 if c.exists(['ppp-options', 'ipv6-intf-id']): ppp_options['ipv6-intf-id'] = c.return_value( ['ppp-options', 'ipv6-intf-id']) if c.exists(['ppp-options', 'ipv6-peer-intf-id']): ppp_options['ipv6-peer-intf-id'] = c.return_value( ['ppp-options', 'ipv6-peer-intf-id']) if c.exists(['ppp-options', 'lcp-echo-timeout']): ppp_options['lcp-echo-timeout'] = c.return_value( ['ppp-options', 'lcp-echo-timeout']) if len(ppp_options) != 0: config_data['ppp_options'] = ppp_options if c.exists(['session-control']): config_data['sesscrtl'] = c.return_value(['session-control']) if c.exists(['pado-delay']): config_data['pado_delay'] = '0' a = {} for id in c.list_nodes(['pado-delay']): if not c.return_value(['pado-delay', id, 'sessions']): a[id] = 0 else: a[id] = c.return_value(['pado-delay', id, 'sessions']) for k in sorted(a.keys()): if k != sorted(a.keys())[-1]: config_data['pado_delay'] += ",{0}:{1}".format(k, a[k]) else: config_data['pado_delay'] += ",{0}:{1}".format('-1', a[k]) return config_data def verify(c): if c == None: return None # vertify auth settings if c['authentication']['mode'] == 'local': if not c['authentication']['local-users']: raise ConfigError( 'pppoe-server authentication local-users required') for usr in c['authentication']['local-users']: if not c['authentication']['local-users'][usr]['passwd']: raise ConfigError('user ' + usr + ' requires a password') # if up/download is set, check that both have a value if c['authentication']['local-users'][usr]['upload']: if not c['authentication']['local-users'][usr]['download']: raise ConfigError( 'user ' + usr + ' requires download speed value') if c['authentication']['local-users'][usr]['download']: if not c['authentication']['local-users'][usr]['upload']: raise ConfigError( 'user ' + usr + ' requires upload speed value') if c['authentication']['mode'] == 'radius': if len(c['authentication']['radiussrv']) == 0: raise ConfigError('radius server required') for rsrv in c['authentication']['radiussrv']: if c['authentication']['radiussrv'][rsrv]['secret'] == None: raise ConfigError( 'radius server ' + rsrv + ' needs a secret configured') # local ippool and gateway settings config checks if c['client_ip_subnets'] or c['client_ip_pool']: if not c['ppp_gw']: raise ConfigError('pppoe-server local-ip required') if c['ppp_gw'] and not c['client_ip_subnets'] and not c['client_ip_pool']: print ("Warning: No pppoe client IPv4 pool defined") def generate(c): if c == None: return None # Prepare Jinja2 template loader from files tmpl_path = os.path.join(vyos_data_dir['data'], 'templates', 'pppoe-server') fs_loader = FileSystemLoader(tmpl_path) env = Environment(loader=fs_loader, trim_blocks=True) # accel-cmd reload doesn't work so any change results in a restart of the # daemon try: if os.cpu_count() == 1: c['thread_cnt'] = 1 else: c['thread_cnt'] = int(os.cpu_count() / 2) except KeyError: if os.cpu_count() == 1: c['thread_cnt'] = 1 else: c['thread_cnt'] = int(os.cpu_count() / 2) tmpl = env.get_template('pppoe.config.tmpl') config_text = tmpl.render(c) with open(pppoe_conf, 'w') as f: f.write(config_text) if c['authentication']['local-users']: tmpl = env.get_template('chap-secrets.tmpl') chap_secrets_txt = tmpl.render(c) old_umask = os.umask(0o077) with open(chap_secrets, 'w') as f: f.write(chap_secrets_txt) os.umask(old_umask) return c def apply(c): if c == None: if os.path.exists(pidfile): _accel_cmd('shutdown hard') if os.path.exists(pidfile): os.remove(pidfile) return None if not os.path.exists(pidfile): ret = run(f'/usr/sbin/accel-pppd -c {pppoe_conf} -p {pidfile} -d') _chk_con() if ret != 0 and os.path.exists(pidfile): os.remove(pidfile) raise ConfigError('accel-pppd failed to start') else: _accel_cmd('restart') if __name__ == '__main__': try: c = get_config() verify(c) generate(c) apply(c) except ConfigError as e: print(e) exit(1)