path: root/src/conf_mode/nat.py

#!/usr/bin/env python3
#
# Copyright (C) 2020 VyOS maintainers and contributors
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 or later as
# published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

import jmespath
import json
import os

from copy import deepcopy
from distutils.version import LooseVersion
from platform import release as kernel_version
from sys import exit
from netifaces import interfaces

from vyos.config import Config
from vyos.template import render
from vyos.util import call
from vyos.util import cmd
from vyos.util import check_kmod
from vyos.validate import is_addr_assigned
from vyos import ConfigError

from vyos import airbag
airbag.enable()

if LooseVersion(kernel_version()) > LooseVersion('5.1'):
    k_mod = ['nft_nat', 'nft_chain_nat']
else:
    k_mod = ['nft_nat', 'nft_chain_nat_ipv4']

default_config_data = {
    'deleted': False,
    'destination': [],
    'helper_functions': None,
    'pre_ct_helper': '',
    'pre_ct_conntrack': '',
    'out_ct_helper': '',
    'out_ct_conntrack': '',
    'source': []
}

iptables_nat_config = '/tmp/vyos-nat-rules.nft'

def get_handler(json, chain, target):
    """ Get nftable rule handler number of given chain/target combination.
    Handler is required when adding NAT/Conntrack helper targets """
    for x in json:
        if x['chain'] != chain:
            continue
        if x['target'] != target:
            continue
        return x['handle']

    return None


def verify_rule(rule, err_msg):
    """ Common verify steps used for both source and destination NAT """
    if rule['translation_port'] or rule['dest_port'] or rule['source_port']:
        if rule['protocol'] not in ['tcp', 'udp', 'tcp_udp']:
            proto = rule['protocol']
            raise ConfigError(f'{err_msg} ports can only be specified when protocol is "tcp", "udp" or "tcp_udp" (currently "{proto}")')

        if '/' in rule['translation_address']:
            raise ConfigError(f'{err_msg}\n' \
                             'Cannot use ports with an IPv4net type translation address as it\n' \
                             'statically maps a whole network of addresses onto another\n' \
                             'network of addresses')


def parse_configuration(conf, source_dest):
    """ Common wrapper to read in both NAT source and destination CLI """
    ruleset = []
    base_level = ['nat', source_dest]
    conf.set_level(base_level)
    for number in conf.list_nodes(['rule']):
        rule = {
            'description': '',
            'dest_address': '',
            'dest_port': '',
            'disabled': False,
            'exclude': False,
            'interface_in': '',
            'interface_out': '',
            'log': False,
            'protocol': 'all',
            'number': number,
            'source_address': '',
            'source_prefix': '',
            'source_port': '',
            'translation_address': '',
            'translation_prefix': '',
            'translation_port': ''
        }
        conf.set_level(base_level + ['rule', number])

        if conf.exists(['description']):
            rule['description'] = conf.return_value(['description'])

        if conf.exists(['destination', 'address']):
            tmp = conf.return_value(['destination', 'address'])
            if tmp.startswith('!'):
                tmp = tmp.replace('!', '!=')
            rule['dest_address'] = tmp

        if conf.exists(['destination', 'port']):
            tmp = conf.return_value(['destination', 'port'])
            if tmp.startswith('!'):
                tmp = tmp.replace('!', '!=')
            rule['dest_port'] = tmp

        if conf.exists(['disable']):
            rule['disabled'] = True

        if conf.exists(['exclude']):
            rule['exclude'] = True

        if conf.exists(['inbound-interface']):
            rule['interface_in'] = conf.return_value(['inbound-interface'])

        if conf.exists(['outbound-interface']):
            rule['interface_out'] = conf.return_value(['outbound-interface'])

        if conf.exists(['log']):
            rule['log'] = True

        if conf.exists(['protocol']):
            rule['protocol'] = conf.return_value(['protocol'])

        if conf.exists(['source', 'address']):
            tmp = conf.return_value(['source', 'address'])
            if tmp.startswith('!'):
                tmp = tmp.replace('!', '!=')
            rule['source_address'] = tmp

        if conf.exists(['source', 'prefix']):
            rule['source_prefix'] = conf.return_value(['source', 'prefix'])

        if conf.exists(['source', 'port']):
            tmp = conf.return_value(['source', 'port'])
            if tmp.startswith('!'):
                tmp = tmp.replace('!', '!=')
            rule['source_port'] = tmp

        if conf.exists(['translation', 'address']):
            rule['translation_address'] = conf.return_value(['translation', 'address'])

        if conf.exists(['translation', 'prefix']):
            rule['translation_prefix'] = conf.return_value(['translation', 'prefix'])

        if conf.exists(['translation', 'port']):
            rule['translation_port'] = conf.return_value(['translation', 'port'])

        ruleset.append(rule)

    return ruleset

def get_config(config=None):
    nat = deepcopy(default_config_data)
    if config:
        conf = config
    else:
        conf = Config()

    # read in current nftable (once) for further processing
    tmp = cmd('nft -j list table raw')
    nftable_json = json.loads(tmp)

    # condense the full JSON table into a list with only relevand informations
    pattern = 'nftables[?rule].rule[?expr[].jump].{chain: chain, handle: handle, target: expr[].jump.target | [0]}'
    condensed_json = jmespath.search(pattern, nftable_json)

    if not conf.exists(['nat']):
        nat['helper_functions'] = 'remove'

        # Retrieve current table handler positions
        nat['pre_ct_ignore'] = get_handler(condensed_json, 'PREROUTING', 'VYATTA_CT_HELPER')
        nat['pre_ct_conntrack'] = get_handler(condensed_json, 'PREROUTING', 'NAT_CONNTRACK')
        nat['out_ct_ignore'] = get_handler(condensed_json, 'OUTPUT', 'VYATTA_CT_HELPER')
        nat['out_ct_conntrack'] = get_handler(condensed_json, 'OUTPUT', 'NAT_CONNTRACK')

        nat['deleted'] = True

        return nat

    # check if NAT connection tracking helpers need to be set up - this has to
    # be done only once
    if not get_handler(condensed_json, 'PREROUTING', 'NAT_CONNTRACK'):
        nat['helper_functions'] = 'add'

        # Retrieve current table handler positions
        nat['pre_ct_ignore'] = get_handler(condensed_json, 'PREROUTING', 'VYATTA_CT_IGNORE')
        nat['pre_ct_conntrack'] = get_handler(condensed_json, 'PREROUTING', 'VYATTA_CT_PREROUTING_HOOK')
        nat['out_ct_ignore'] = get_handler(condensed_json, 'OUTPUT', 'VYATTA_CT_IGNORE')
        nat['out_ct_conntrack'] = get_handler(condensed_json, 'OUTPUT', 'VYATTA_CT_OUTPUT_HOOK')

    # set config level for parsing in NAT configuration
    conf.set_level(['nat'])

    # use a common wrapper function to read in the source / destination
    # tree from the config - thus we do not need to replicate almost the
    # same code :-)
    for tgt in ['source', 'destination', 'nptv6']:
        nat[tgt] = parse_configuration(conf, tgt)

    return nat

def verify(nat):
    if nat['deleted']:
        # no need to verify the CLI as NAT is going to be deactivated
        return None

    if nat['helper_functions']:
        if not (nat['pre_ct_ignore'] or nat['pre_ct_conntrack'] or nat['out_ct_ignore'] or nat['out_ct_conntrack']):
            raise Exception('could not determine nftable ruleset handlers')

    for rule in nat['source']:
        interface = rule['interface_out']
        err_msg = f'Source NAT configuration error in rule "{rule["number"]}":'

        if interface and interface not in 'any' and interface not in interfaces():
            print(f'Warning: rule "{rule["number"]}" interface "{interface}" does not exist on this system')

        if not rule['interface_out']:
            raise ConfigError(f'{err_msg} outbound-interface not specified')

        if rule['translation_address']:
            addr = rule['translation_address']
            if addr != 'masquerade':
                for ip in addr.split('-'):
                    if not is_addr_assigned(ip):
                        print(f'Warning: IP address {ip} does not exist on the system!')

        elif not rule['exclude']:
            raise ConfigError(f'{err_msg} translation address not specified')

        # common rule verification
        verify_rule(rule, err_msg)

    for rule in nat['destination']:
        interface = rule['interface_in']
        err_msg = f'Destination NAT configuration error in rule "{rule["number"]}":'

        if interface and interface not in 'any' and interface not in interfaces():
            print(f'Warning: rule "{rule["number"]}" interface "{interface}" does not exist on this system')

        if not rule['interface_in']:
            raise ConfigError(f'{err_msg} inbound-interface not specified')

        if not rule['translation_address'] and not rule['exclude']:
            raise ConfigError(f'{err_msg} translation address not specified')

        # common rule verification
        verify_rule(rule, err_msg)

    return None

def generate(nat):
    render(iptables_nat_config, 'firewall/nftables-nat.tmpl', nat,
           permission=0o755)
    return None

def apply(nat):
    cmd(f'{iptables_nat_config}')
    if os.path.isfile(iptables_nat_config):
        os.unlink(iptables_nat_config)

    return None

if __name__ == '__main__':
    try:
        check_kmod(k_mod)
        c = get_config()
        verify(c)
        generate(c)
        apply(c)
    except ConfigError as e:
        print(e)
        exit(1)