blob: 67d96969e0fbadfd29ede68b0a49f8f8b545ffd2 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
|
#
# VyOS specific sysctl settings, see sysctl.conf (5) for information.
#
# Panic on OOPS
kernel.panic_on_oops=1
# Timeout before rebooting on panic
kernel.panic=60
# Send all core files to /var/core/core.program.pid.time
kernel.core_pattern=/var/core/core-%e-%p-%t
# ARP configuration
# arp_filter - allow multiple network interfaces on same subnet
# arp_announce - avoid local addresses no on target's subnet
# arp_ignore - reply only if target IP is local_address on the interface
# arp_filter defaults to 1 so set all to 0 so vrrp interfaces can override it.
net.ipv4.conf.all.arp_filter=0
# https://vyos.dev/T300
net.ipv4.conf.all.arp_ignore=0
net.ipv4.conf.all.arp_announce=2
# Enable packet forwarding for IPv4
net.ipv4.ip_forward=1
# Enable directed broadcast forwarding feature described in rfc1812#section-5.3.5.2 and rfc2644.
# Note that setting the 'all' entry to 1 doesn't enable directed broadcast forwarding on all interfaces.
# To enable directed broadcast forwarding on an interface, both the 'all' entry and the input interface entry should be set to 1.
net.ipv4.conf.all.bc_forwarding=1
net.ipv4.conf.default.bc_forwarding=0
# if a primary address is removed from an interface promote the
# secondary address if available
net.ipv4.conf.all.promote_secondaries=1
# Ignore ICMP broadcasts sent to broadcast/multicast
net.ipv4.icmp_echo_ignore_broadcasts=1
# Ignore bogus ICMP errors
net.ipv4.icmp_ignore_bogus_error_responses=1
# Send ICMP responses with primary address of exiting interface
net.ipv4.icmp_errors_use_inbound_ifaddr=1
# Log packets with impossible addresses to kernel log
net.ipv4.conf.all.log_martians=1
# Do not ignore all ICMP ECHO requests by default
net.ipv4.icmp_echo_ignore_all=0
# Disable source validation by default
net.ipv4.conf.all.rp_filter=0
net.ipv4.conf.default.rp_filter=0
# Enable tcp syn-cookies by default
net.ipv4.tcp_syncookies=1
# Disable accept_redirects by default for any interface
net.ipv4.conf.all.accept_redirects=0
net.ipv4.conf.default.accept_redirects=0
net.ipv6.conf.all.accept_redirects=0
net.ipv6.conf.default.accept_redirects=0
# Disable accept_source_route by default
net.ipv4.conf.all.accept_source_route=0
net.ipv4.conf.default.accept_source_route=0
net.ipv6.conf.all.accept_source_route=0
net.ipv6.conf.default.accept_source_route=0
# Enable send_redirects by default
net.ipv4.conf.all.send_redirects=1
net.ipv4.conf.default.send_redirects=1
# Increase size of buffer for netlink
net.core.rmem_max=2097152
# Remove IPv4 and IPv6 routes from forward information base when link goes down
net.ipv4.conf.all.ignore_routes_with_linkdown=1
net.ipv4.conf.default.ignore_routes_with_linkdown=1
net.ipv6.conf.all.ignore_routes_with_linkdown=1
net.ipv6.conf.default.ignore_routes_with_linkdown=1
# Enable packet forwarding for IPv6
net.ipv6.conf.all.forwarding=1
# Increase route table limit
net.ipv6.route.max_size = 262144
# Do not forget IPv6 addresses when a link goes down
net.ipv6.conf.default.keep_addr_on_down=1
net.ipv6.conf.all.keep_addr_on_down=1
net.ipv6.route.skip_notify_on_dev_down=1
# Default value of 20 seems to interfere with larger OSPF and VRRP setups
net.ipv4.igmp_max_memberships = 512
# Enable global RFS (Receive Flow Steering) configuration. RFS is inactive
# until explicitly configured at the interface level
net.core.rps_sock_flow_entries = 32768
# Congestion control
net.core.default_qdisc=fq_codel
net.ipv4.tcp_congestion_control=bbr
# VRF - Virtual routing and forwarding
# When net.vrf.strict_mode=0 (default) it is possible to associate multiple
# VRF devices to the same table. Conversely, when net.vrf.strict_mode=1 a
# table can be associated to a single VRF device.
#
# A VRF table can be used by the VyOS CLI only once (ensured by verify()),
# this simply adds an additional Kernel safety net
net.vrf.strict_mode=1
|
