.. _vyos.vyos.vyos_lag_interfaces_module: ***************************** vyos.vyos.vyos_lag_interfaces ***************************** **LAG interfaces resource module** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module manages attributes of link aggregation groups on VyOS network devices. Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
config
list
A list of link aggregation group configurations.
arp_monitor
dictionary
ARP Link monitoring parameters.
interval
integer
ARP link monitoring frequency in milliseconds.
target
list
IP address to use for ARP monitoring.
hash_policy
string
    Choices:
  • layer2
  • layer2+3
  • layer3+4
LAG or bonding transmit hash policy.
members
list
List of member interfaces for the LAG (bond).
member
string
Name of the member interface.
mode
string
    Choices:
  • 802.3ad
  • active-backup
  • broadcast
  • round-robin
  • transmit-load-balance
  • adaptive-load-balance
  • xor-hash
LAG or bond mode.
name
string / required
Name of the link aggregation group (LAG) or bond.
primary
string
Primary device interfaces for the LAG (bond).
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the VyOS device by executing the command show configuration commands | grep bond.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged ←
  • replaced
  • overridden
  • deleted
  • parsed
  • gathered
  • rendered
The state of the configuration after module completion.

Notes ----- .. note:: - Tested against VyOS 1.1.8 (helium). - This module works with connection ``network_cli``. See `the VyOS OS Platform Options <../network/user_guide/platform_vyos.html>`_. Examples -------- .. code-block:: yaml+jinja # Using merged # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 # set interfaces bonding bond3 # - name: Merge provided configuration with device configuration vyos.vyos.vyos_lag_interfaces: config: - name: bond2 mode: active-backup members: - member: eth2 - member: eth1 hash_policy: layer2 primary: eth2 - name: bond3 mode: active-backup hash_policy: layer2+3 members: - member: eth3 primary: eth3 state: merged # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "name": "bond2" # }, # { # "name": "bond3" # } # ], # # "commands": [ # "set interfaces bonding bond2 hash-policy 'layer2'", # "set interfaces bonding bond2 mode 'active-backup'", # "set interfaces ethernet eth2 bond-group bond2", # "set interfaces ethernet eth1 bond-group bond2", # "set interfaces bonding bond2 primary 'eth2'", # "set interfaces bonding bond3 hash-policy 'layer2+3'", # "set interfaces bonding bond3 mode 'active-backup'", # "set interfaces ethernet eth3 bond-group bond3", # "set interfaces bonding bond3 primary 'eth3'" # ] # # "after": [ # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # } # ], # "mode": "active-backup", # "name": "bond2", # "primary": "eth2" # }, # { # "hash_policy": "layer2+3", # "members": [ # { # "member": "eth3" # } # ], # "mode": "active-backup", # "name": "bond3", # "primary": "eth3" # } # ] # # After state: # ------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 hash-policy 'layer2' # set interfaces bonding bond2 mode 'active-backup' # set interfaces bonding bond2 primary 'eth2' # set interfaces bonding bond3 hash-policy 'layer2+3' # set interfaces bonding bond3 mode 'active-backup' # set interfaces bonding bond3 primary 'eth3' # set interfaces ethernet eth1 bond-group 'bond2' # set interfaces ethernet eth2 bond-group 'bond2' # set interfaces ethernet eth3 bond-group 'bond3' # Using replaced # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 hash-policy 'layer2' # set interfaces bonding bond2 mode 'active-backup' # set interfaces bonding bond2 primary 'eth2' # set interfaces bonding bond3 hash-policy 'layer2+3' # set interfaces bonding bond3 mode 'active-backup' # set interfaces bonding bond3 primary 'eth3' # set interfaces ethernet eth1 bond-group 'bond2' # set interfaces ethernet eth2 bond-group 'bond2' # set interfaces ethernet eth3 bond-group 'bond3' # - name: Replace device configurations of listed LAGs with provided configurations vyos.vyos.vyos_lag_interfaces: config: - name: bond3 mode: 802.3ad hash_policy: layer2 members: - member: eth3 state: replaced # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # } # ], # "mode": "active-backup", # "name": "bond2", # "primary": "eth2" # }, # { # "hash_policy": "layer2+3", # "members": [ # { # "member": "eth3" # } # ], # "mode": "active-backup", # "name": "bond3", # "primary": "eth3" # } # ], # # "commands": [ # "delete interfaces bonding bond3 primary", # "set interfaces bonding bond3 hash-policy 'layer2'", # "set interfaces bonding bond3 mode '802.3ad'" # ], # # "after": [ # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # } # ], # "mode": "active-backup", # "name": "bond2", # "primary": "eth2" # }, # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth3" # } # ], # "mode": "802.3ad", # "name": "bond3" # } # ], # # After state: # ------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 hash-policy 'layer2' # set interfaces bonding bond2 mode 'active-backup' # set interfaces bonding bond2 primary 'eth2' # set interfaces bonding bond3 hash-policy 'layer2' # set interfaces bonding bond3 mode '802.3ad' # set interfaces ethernet eth1 bond-group 'bond2' # set interfaces ethernet eth2 bond-group 'bond2' # set interfaces ethernet eth3 bond-group 'bond3' # Using overridden # # Before state # -------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 hash-policy 'layer2' # set interfaces bonding bond2 mode 'active-backup' # set interfaces bonding bond2 primary 'eth2' # set interfaces bonding bond3 hash-policy 'layer2' # set interfaces bonding bond3 mode '802.3ad' # set interfaces ethernet eth1 bond-group 'bond2' # set interfaces ethernet eth2 bond-group 'bond2' # set interfaces ethernet eth3 bond-group 'bond3' # - name: Overrides all device configuration with provided configuration vyos.vyos.vyos_lag_interfaces: config: - name: bond3 mode: active-backup members: - member: eth1 - member: eth2 - member: eth3 primary: eth3 hash_policy: layer2 state: overridden # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # } # ], # "mode": "active-backup", # "name": "bond2", # "primary": "eth2" # }, # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth3" # } # ], # "mode": "802.3ad", # "name": "bond3" # } # ], # # "commands": [ # "delete interfaces bonding bond2 hash-policy", # "delete interfaces ethernet eth1 bond-group bond2", # "delete interfaces ethernet eth2 bond-group bond2", # "delete interfaces bonding bond2 mode", # "delete interfaces bonding bond2 primary", # "set interfaces bonding bond3 mode 'active-backup'", # "set interfaces ethernet eth1 bond-group bond3", # "set interfaces ethernet eth2 bond-group bond3", # "set interfaces bonding bond3 primary 'eth3'" # ], # # "after": [ # { # "name": "bond2" # }, # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # }, # { # "member": "eth3" # } # ], # "mode": "active-backup", # "name": "bond3", # "primary": "eth3" # } # ], # # # After state # ------------ # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 # set interfaces bonding bond3 hash-policy 'layer2' # set interfaces bonding bond3 mode 'active-backup' # set interfaces bonding bond3 primary 'eth3' # set interfaces ethernet eth1 bond-group 'bond3' # set interfaces ethernet eth2 bond-group 'bond3' # set interfaces ethernet eth3 bond-group 'bond3' # Using deleted # # Before state # ------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 hash-policy 'layer2' # set interfaces bonding bond2 mode 'active-backup' # set interfaces bonding bond2 primary 'eth2' # set interfaces bonding bond3 hash-policy 'layer2+3' # set interfaces bonding bond3 mode 'active-backup' # set interfaces bonding bond3 primary 'eth3' # set interfaces ethernet eth1 bond-group 'bond2' # set interfaces ethernet eth2 bond-group 'bond2' # set interfaces ethernet eth3 bond-group 'bond3' # - name: Delete LAG attributes of given interfaces (Note This won't delete the interface itself) vyos.vyos.vyos_lag_interfaces: config: - name: bond2 - name: bond3 state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": [ # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # } # ], # "mode": "active-backup", # "name": "bond2", # "primary": "eth2" # }, # { # "hash_policy": "layer2+3", # "members": [ # { # "member": "eth3" # } # ], # "mode": "active-backup", # "name": "bond3", # "primary": "eth3" # } # ], # "commands": [ # "delete interfaces bonding bond2 hash-policy", # "delete interfaces ethernet eth1 bond-group bond2", # "delete interfaces ethernet eth2 bond-group bond2", # "delete interfaces bonding bond2 mode", # "delete interfaces bonding bond2 primary", # "delete interfaces bonding bond3 hash-policy", # "delete interfaces ethernet eth3 bond-group bond3", # "delete interfaces bonding bond3 mode", # "delete interfaces bonding bond3 primary" # ], # # "after": [ # { # "name": "bond2" # }, # { # "name": "bond3" # } # ], # # After state # ------------ # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 # set interfaces bonding bond3 # Using gathered # # Before state: # ------------- # # vyos@192# run show configuration commands | grep bond # set interfaces bonding bond0 hash-policy 'layer2' # set interfaces bonding bond0 mode 'active-backup' # set interfaces bonding bond0 primary 'eth1' # set interfaces bonding bond1 hash-policy 'layer2+3' # set interfaces bonding bond1 mode 'active-backup' # set interfaces bonding bond1 primary 'eth2' # set interfaces ethernet eth1 bond-group 'bond0' # set interfaces ethernet eth2 bond-group 'bond1' # - name: Gather listed lag interfaces with provided configurations vyos.vyos.vyos_lag_interfaces: config: state: gathered # # # ------------------------- # Module Execution Result # ------------------------- # # "gathered": [ # { # "afi": "ipv6", # "rule_sets": [ # { # "default_action": "accept", # "description": "This is ipv6 specific rule-set", # "name": "UPLINK", # "rules": [ # { # "action": "accept", # "description": "Fwipv6-Rule 1 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 1 # }, # { # "action": "accept", # "description": "Fwipv6-Rule 2 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 2 # } # ] # } # ] # }, # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "INBOUND", # "rules": [ # { # "action": "accept", # "description": "Rule 101 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 101 # }, # { # "action": "reject", # "description": "Rule 102 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 102 # }, # { # "action": "accept", # "description": "Rule 103 is configured by Ansible", # "destination": { # "group": { # "address_group": "inbound" # } # }, # "number": 103, # "source": { # "address": "192.0.2.0" # }, # "state": { # "established": true, # "invalid": false, # "new": false, # "related": true # } # } # ] # } # ] # } # ] # # # After state: # ------------- # # vyos@192# run show configuration commands | grep bond # set interfaces bonding bond0 hash-policy 'layer2' # set interfaces bonding bond0 mode 'active-backup' # set interfaces bonding bond0 primary 'eth1' # set interfaces bonding bond1 hash-policy 'layer2+3' # set interfaces bonding bond1 mode 'active-backup' # set interfaces bonding bond1 primary 'eth2' # set interfaces ethernet eth1 bond-group 'bond0' # set interfaces ethernet eth2 bond-group 'bond1' # Using rendered # # - name: Render the commands for provided configuration vyos.vyos.vyos_lag_interfaces: config: - name: bond0 hash_policy: layer2 members: - member: eth1 mode: active-backup primary: eth1 - name: bond1 hash_policy: layer2+3 members: - member: eth2 mode: active-backup primary: eth2 state: rendered # # # ------------------------- # Module Execution Result # ------------------------- # # # "rendered": [ # "set interfaces bonding bond0 hash-policy 'layer2'", # "set interfaces ethernet eth1 bond-group 'bond0'", # "set interfaces bonding bond0 mode 'active-backup'", # "set interfaces bonding bond0 primary 'eth1'", # "set interfaces bonding bond1 hash-policy 'layer2+3'", # "set interfaces ethernet eth2 bond-group 'bond1'", # "set interfaces bonding bond1 mode 'active-backup'", # "set interfaces bonding bond1 primary 'eth2'" # ] # Using parsed # # - name: Parsed the commands for provided configuration vyos.vyos.vyos_l3_interfaces: running_config: "set interfaces bonding bond0 hash-policy 'layer2' set interfaces bonding bond0 mode 'active-backup' set interfaces bonding bond0 primary 'eth1' set interfaces bonding bond1 hash-policy 'layer2+3' set interfaces bonding bond1 mode 'active-backup' set interfaces bonding bond1 primary 'eth2' set interfaces ethernet eth1 bond-group 'bond0' set interfaces ethernet eth2 bond-group 'bond1'" state: parsed # # # ------------------------- # Module Execution Result # ------------------------- # # # "parsed": [ # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # } # ], # "mode": "active-backup", # "name": "bond0", # "primary": "eth1" # }, # { # "hash_policy": "layer2+3", # "members": [ # { # "member": "eth2" # } # ], # "mode": "active-backup", # "name": "bond1", # "primary": "eth2" # } # ] Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
after
list
when changed
The configuration as structured data after module completion.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
list
always
The configuration as structured data prior to module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list
always
The set of commands pushed to the remote device.

Sample:
['set interfaces bonding bond2', 'set interfaces bonding bond2 hash-policy layer2']


Status ------ Authors ~~~~~~~ - Rohit Thakur (@rohitthakur2590) .. hint:: Configuration entries for each entry type have a low to high priority order. For example, a variable that is lower in the list will override a variable that is higher up.