T6754: Delete Jenkins build packagesmergify/bp/circinus/pr-781

(cherry picked from commit 2fed892f2746561207aa21a2660f4d8f3f79d24e)

# Conflicts:
#	packages/linux-kernel/.gitignore
#	packages/linux-kernel/Jenkinsfile
#	packages/linux-kernel/build-accel-ppp.sh
#	packages/linux-kernel/build-intel-ixgbe.sh
#	packages/linux-kernel/build-intel-ixgbevf.sh
#	packages/linux-kernel/build-intel-qat.sh
#	packages/linux-kernel/build-jool.py
#	packages/linux-kernel/build-kernel.sh
#	packages/linux-kernel/build-nat-rtsp.sh
#	packages/linux-kernel/build-openvpn-dco.sh
#	packages/net-snmp/Jenkinsfile

2 files changed, 0 insertions, 307 deletions

diff --git a/packages/linux-kernel/patches/ixgbe/add_1000base-bx_support.patch b/packages/linux-kernel/patches/ixgbe/add_1000base-bx_support.patch
deleted file mode 100644
index 6c536c38..00000000
--- a/packages/linux-kernel/patches/ixgbe/add_1000base-bx_support.patch
+++ /dev/null
@@ -1,259 +0,0 @@
-From 02491fc5cb9bfd0905cfa481d3a6156167fa1720 Mon Sep 17 00:00:00 2001
-From: Ernesto Castellotti <ernesto@castellotti.net>
-Date: Sat, 23 Mar 2024 12:57:56 +0100
-Subject: [BACKPORT linux v6.9] [PATCH] ixgbe: Add 1000BASE-BX support
-
-Added support for 1000BASE-BX, i.e. Gigabit Ethernet over single strand
-of single-mode fiber.
-The initialization of a 1000BASE-BX SFP is the same as 1000BASE-SX/LX
-with the only difference that the Bit Rate Nominal Value must be
-checked to make sure it is a Gigabit Ethernet transceiver, as described
-by the SFF-8472 specification.
-
-This was tested with the FS.com SFP-GE-BX 1310/1490nm 10km transceiver:
-$ ethtool -m eth4
-        Identifier                                : 0x03 (SFP)
-        Extended identifier                       : 0x04 (GBIC/SFP defined by 2-wire interface ID)
-        Connector                                 : 0x07 (LC)
-        Transceiver codes                         : 0x00 0x00 0x00 0x40 0x00 0x00 0x00 0x00 0x00
-        Transceiver type                          : Ethernet: BASE-BX10
-        Encoding                                  : 0x01 (8B/10B)
-        BR, Nominal                               : 1300MBd
-        Rate identifier                           : 0x00 (unspecified)
-        Length (SMF,km)                           : 10km
-        Length (SMF)                              : 10000m
-        Length (50um)                             : 0m
-        Length (62.5um)                           : 0m
-        Length (Copper)                           : 0m
-        Length (OM3)                              : 0m
-        Laser wavelength                          : 1310nm
-        Vendor name                               : FS
-        Vendor OUI                                : 64:9d:99
-        Vendor PN                                 : SFP-GE-BX
-        Vendor rev                                :
-        Option values                             : 0x20 0x0a
-        Option                                    : RX_LOS implemented
-        Option                                    : TX_FAULT implemented
-        Option                                    : Power level 3 requirement
-        BR margin, max                            : 0%
-        BR margin, min                            : 0%
-        Vendor SN                                 : S2202359108
-        Date code                                 : 220307
-        Optical diagnostics support               : Yes
-        Laser bias current                        : 17.650 mA
-        Laser output power                        : 0.2132 mW / -6.71 dBm
-        Receiver signal average optical power     : 0.2740 mW / -5.62 dBm
-        Module temperature                        : 47.30 degrees C / 117.13 degrees F
-        Module voltage                            : 3.2576 V
-        Alarm/warning flags implemented           : Yes
-        Laser bias current high alarm             : Off
-        Laser bias current low alarm              : Off
-        Laser bias current high warning           : Off
-        Laser bias current low warning            : Off
-        Laser output power high alarm             : Off
-        Laser output power low alarm              : Off
-        Laser output power high warning           : Off
-        Laser output power low warning            : Off
-        Module temperature high alarm             : Off
-        Module temperature low alarm              : Off
-        Module temperature high warning           : Off
-        Module temperature low warning            : Off
-        Module voltage high alarm                 : Off
-        Module voltage low alarm                  : Off
-        Module voltage high warning               : Off
-        Module voltage low warning                : Off
-        Laser rx power high alarm                 : Off
-        Laser rx power low alarm                  : Off
-        Laser rx power high warning               : Off
-        Laser rx power low warning                : Off
-        Laser bias current high alarm threshold   : 110.000 mA
-        Laser bias current low alarm threshold    : 1.000 mA
-        Laser bias current high warning threshold : 100.000 mA
-        Laser bias current low warning threshold  : 1.000 mA
-        Laser output power high alarm threshold   : 0.7079 mW / -1.50 dBm
-        Laser output power low alarm threshold    : 0.0891 mW / -10.50 dBm
-        Laser output power high warning threshold : 0.6310 mW / -2.00 dBm
-        Laser output power low warning threshold  : 0.1000 mW / -10.00 dBm
-        Module temperature high alarm threshold   : 90.00 degrees C / 194.00 degrees F
-        Module temperature low alarm threshold    : -45.00 degrees C / -49.00 degrees F
-        Module temperature high warning threshold : 85.00 degrees C / 185.00 degrees F
-        Module temperature low warning threshold  : -40.00 degrees C / -40.00 degrees F
-        Module voltage high alarm threshold       : 3.7950 V
-        Module voltage low alarm threshold        : 2.8050 V
-        Module voltage high warning threshold     : 3.4650 V
-        Module voltage low warning threshold      : 3.1350 V
-        Laser rx power high alarm threshold       : 0.7079 mW / -1.50 dBm
-        Laser rx power low alarm threshold        : 0.0028 mW / -25.53 dBm
-        Laser rx power high warning threshold     : 0.6310 mW / -2.00 dBm
-        Laser rx power low warning threshold      : 0.0032 mW / -24.95 dBm
-
-Signed-off-by: Ernesto Castellotti <ernesto@castellotti.net>
-Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
-Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
-Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-Link: https://lore.kernel.org/r/20240301184806.2634508-3-anthony.l.nguyen@intel.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- ixgbe_82599.c   |  4 +++-
- ixgbe_ethtool.c |  4 ++++
- ixgbe_phy.c     | 33 +++++++++++++++++++++++++++++----
- ixgbe_phy.h     |  2 ++
- ixgbe_type.h    |  2 ++
- 5 files changed, 40 insertions(+), 5 deletions(-)
-
-diff --git a/ixgbe_82599.c b/ixgbe_82599.c
-index 75e368f..b0a10de 100644
---- a/ixgbe_82599.c
-+++ b/ixgbe_82599.c
-@@ -395,7 +395,9 @@ s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
- 	    hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
- 	    hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
- 	    hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
--	    hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) {
-+	    hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1 ||
-+	    hw->phy.sfp_type == ixgbe_sfp_type_1g_bx_core0 ||
-+	    hw->phy.sfp_type == ixgbe_sfp_type_1g_bx_core1) {
- 		*speed = IXGBE_LINK_SPEED_1GB_FULL;
- 		*autoneg = true;
- 		goto out;
-diff --git a/ixgbe_ethtool.c b/ixgbe_ethtool.c
-index 7ada455..fb16f3c 100644
---- a/ixgbe_ethtool.c
-+++ b/ixgbe_ethtool.c
-@@ -412,6 +412,8 @@ static int ixgbe_get_link_ksettings(struct net_device *netdev,
- 		case ixgbe_sfp_type_1g_sx_core1:
- 		case ixgbe_sfp_type_1g_lx_core0:
- 		case ixgbe_sfp_type_1g_lx_core1:
-+		case ixgbe_sfp_type_1g_bx_core0:
-+		case ixgbe_sfp_type_1g_bx_core1:
- 			ethtool_link_ksettings_add_link_mode(cmd, supported,
- 							     FIBRE);
- 			ethtool_link_ksettings_add_link_mode(cmd, advertising,
-@@ -642,6 +644,8 @@ static int ixgbe_get_settings(struct net_device *netdev,
- 		case ixgbe_sfp_type_1g_sx_core1:
- 		case ixgbe_sfp_type_1g_lx_core0:
- 		case ixgbe_sfp_type_1g_lx_core1:
-+		case ixgbe_sfp_type_1g_bx_core0:
-+		case ixgbe_sfp_type_1g_bx_core1:
- 			ecmd->supported |= SUPPORTED_FIBRE;
- 			ecmd->advertising |= ADVERTISED_FIBRE;
- 			ecmd->port = PORT_FIBRE;
-diff --git a/ixgbe_phy.c b/ixgbe_phy.c
-index 647fdba..0f39fd8 100644
---- a/ixgbe_phy.c
-+++ b/ixgbe_phy.c
-@@ -1266,6 +1266,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
- 	u8 comp_codes_1g = 0;
- 	u8 comp_codes_10g = 0;
- 	u8 oui_bytes[3] = {0, 0, 0};
-+	u8 bitrate_nominal = 0;
- 	u8 cable_tech = 0;
- 	u8 cable_spec = 0;
- 	u16 enforce_sfp = 0;
-@@ -1309,6 +1310,12 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
- 						     IXGBE_SFF_CABLE_TECHNOLOGY,
- 						     &cable_tech);
- 
-+		if (status != IXGBE_SUCCESS)
-+			goto err_read_i2c_eeprom;
-+
-+		status = hw->phy.ops.read_i2c_eeprom(hw,
-+ 						     IXGBE_SFF_BITRATE_NOMINAL,
-+ 						     &bitrate_nominal);
- 		if (status != IXGBE_SUCCESS)
- 			goto err_read_i2c_eeprom;
- 
-@@ -1391,6 +1398,18 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
- 				else
- 					hw->phy.sfp_type =
- 						ixgbe_sfp_type_1g_lx_core1;
-+			/* Support only Ethernet 1000BASE-BX10, checking the Bit Rate
-+			 * Nominal Value as per SFF-8472 by convention 1.25 Gb/s should
-+			 * be rounded up to 0Dh (13 in units of 100 MBd) for 1000BASE-BX
-+			 */
-+			} else if ((comp_codes_1g & IXGBE_SFF_BASEBX10_CAPABLE) &&
-+				(bitrate_nominal == 0xD)) {
-+				if (hw->bus.lan_id == 0)
-+					hw->phy.sfp_type =
-+					ixgbe_sfp_type_1g_bx_core0;
-+				else
-+					hw->phy.sfp_type =
-+					ixgbe_sfp_type_1g_bx_core1;
- 			} else {
- 				hw->phy.sfp_type = ixgbe_sfp_type_unknown;
- 			}
-@@ -1481,7 +1500,9 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
- 		      hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
- 		      hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
- 		      hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
--		      hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) {
-+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1 ||
-+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_bx_core0 ||
-+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_bx_core1)) {
- 			hw->phy.type = ixgbe_phy_sfp_unsupported;
- 			status = IXGBE_ERR_SFP_NOT_SUPPORTED;
- 			goto out;
-@@ -1500,7 +1521,9 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
- 		      hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
- 		      hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
- 		      hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
--		      hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) {
-+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1 ||
-+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_bx_core0 ||
-+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_bx_core1)) {
- 			/* Make sure we're a supported PHY type */
- 			if (hw->phy.type == ixgbe_phy_sfp_intel) {
- 				status = IXGBE_SUCCESS;
-@@ -1819,12 +1842,14 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
- 	if (sfp_type == ixgbe_sfp_type_da_act_lmt_core0 ||
- 	    sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
- 	    sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
--	    sfp_type == ixgbe_sfp_type_1g_sx_core0)
-+	    sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
-+	    sfp_type == ixgbe_sfp_type_1g_bx_core0)
- 		sfp_type = ixgbe_sfp_type_srlr_core0;
- 	else if (sfp_type == ixgbe_sfp_type_da_act_lmt_core1 ||
- 		 sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
- 		 sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
--		 sfp_type == ixgbe_sfp_type_1g_sx_core1)
-+		 sfp_type == ixgbe_sfp_type_1g_sx_core1 ||
-+		 sfp_type == ixgbe_sfp_type_1g_bx_core1)
- 		sfp_type = ixgbe_sfp_type_srlr_core1;
- 
- 	/* Read offset to PHY init contents */
-diff --git a/ixgbe_phy.h b/ixgbe_phy.h
-index 3ece00f..60c7574 100644
---- a/ixgbe_phy.h
-+++ b/ixgbe_phy.h
-@@ -18,6 +18,7 @@
- #define IXGBE_SFF_1GBE_COMP_CODES	0x6
- #define IXGBE_SFF_10GBE_COMP_CODES	0x3
- #define IXGBE_SFF_CABLE_TECHNOLOGY	0x8
-+#define IXGBE_SFF_BITRATE_NOMINAL	0xC
- #define IXGBE_SFF_CABLE_SPEC_COMP	0x3C
- #define IXGBE_SFF_SFF_8472_SWAP		0x5C
- #define IXGBE_SFF_SFF_8472_COMP		0x5E
-@@ -40,6 +41,7 @@
- #define IXGBE_SFF_1GBASESX_CAPABLE	0x1
- #define IXGBE_SFF_1GBASELX_CAPABLE	0x2
- #define IXGBE_SFF_1GBASET_CAPABLE	0x8
-+#define IXGBE_SFF_BASEBX10_CAPABLE	0x64
- #define IXGBE_SFF_10GBASESR_CAPABLE	0x10
- #define IXGBE_SFF_10GBASELR_CAPABLE	0x20
- #define IXGBE_SFF_SOFT_RS_SELECT_MASK	0x8
-diff --git a/ixgbe_type.h b/ixgbe_type.h
-index d85bd9b..fbe2e66 100644
---- a/ixgbe_type.h
-+++ b/ixgbe_type.h
-@@ -3705,6 +3705,8 @@ enum ixgbe_sfp_type {
- 	ixgbe_sfp_type_1g_sx_core1 = 12,
- 	ixgbe_sfp_type_1g_lx_core0 = 13,
- 	ixgbe_sfp_type_1g_lx_core1 = 14,
-+	ixgbe_sfp_type_1g_bx_core0 = 15,
-+	ixgbe_sfp_type_1g_bx_core1 = 16,
- 	ixgbe_sfp_type_not_present = 0xFFFE,
- 	ixgbe_sfp_type_unknown = 0xFFFF
- };
--- 
-2.44.0
-
diff --git a/packages/linux-kernel/patches/ixgbe/allow_unsupported_sfp.patch b/packages/linux-kernel/patches/ixgbe/allow_unsupported_sfp.patch
deleted file mode 100644
index 647fe4d5..00000000
--- a/packages/linux-kernel/patches/ixgbe/allow_unsupported_sfp.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 4f6c1dc3c48a1b2fa7c06206e6366bcfaa33f3f7 Mon Sep 17 00:00:00 2001
-From: Christian Breunig <christian@breunig.cc>
-Date: Fri, 22 Mar 2024 11:33:27 +0000
-Subject: [PATCH] ixgbe: always enable support for unsupported SFP+ modules
-
----
- ixgbe_param.c | 10 +++++++---
- 1 file changed, 7 insertions(+), 3 deletions(-)
-
-diff --git a/ixgbe_param.c b/ixgbe_param.c
-index 71197b7..dac33ca 100644
---- a/ixgbe_param.c
-+++ b/ixgbe_param.c
-@@ -307,7 +307,7 @@ IXGBE_PARAM(LRO, "Large Receive Offload (0,1), default 0 = off");
-  * Default Value: 0
-  */
- IXGBE_PARAM(allow_unsupported_sfp, "Allow unsupported and untested "
--	    "SFP+ modules on 82599 based adapters, default 0 = Disable");
-+	    "SFP+ modules on 82599 based adapters, default 1 = Enable");
- 
- /* Enable/disable support for DMA coalescing
-  *
-@@ -1133,8 +1133,8 @@ void ixgbe_check_options(struct ixgbe_adapter *adapter)
- 	struct ixgbe_option opt = {
- 			.type = enable_option,
- 			.name = "allow_unsupported_sfp",
--			.err  = "defaulting to Disabled",
--			.def  = OPTION_DISABLED
-+			.err  = "defaulting to Enabled",
-+			.def  = OPTION_ENABLED
- 		};
- #ifdef module_param_array
- 		if (num_allow_unsupported_sfp > bd) {
-@@ -1150,7 +1150,11 @@ void ixgbe_check_options(struct ixgbe_adapter *adapter)
- 			}
- #ifdef module_param_array
- 		} else {
-+			if (opt.def == OPTION_ENABLED) {
-+				adapter->hw.allow_unsupported_sfp = true;
-+			} else {
- 				adapter->hw.allow_unsupported_sfp = false;
-+			}
- 		}
- #endif
- 	}
--- 
-2.39.2
-