add ntp config module

Add support for installing and configuring ntp service, exposing the
minimum config of servers or pools to be added. If none are defined
then fallback on generating a list of pools by distro hosted at
pool.ntp.org (which matches what's found in the default ntp.conf
shipped in the respective distro).

1 files changed, 100 insertions, 0 deletions

diff --git a/templates/ntp.conf.sles.tmpl b/templates/ntp.conf.sles.tmpl
new file mode 100644
index 00000000..5c5fc4db
--- /dev/null
+++ b/templates/ntp.conf.sles.tmpl
@@ -0,0 +1,100 @@
+## template:jinja
+
+################################################################################
+## /etc/ntp.conf
+##
+## Sample NTP configuration file.
+## See package 'ntp-doc' for documentation, Mini-HOWTO and FAQ.
+## Copyright (c) 1998 S.u.S.E. GmbH Fuerth, Germany.
+##
+## Author: Michael Andres,  <ma@suse.de>
+##         Michael Skibbe,  <mskibbe@suse.de>
+##
+################################################################################
+
+##
+## Radio and modem clocks by convention have addresses in the 
+## form 127.127.t.u, where t is the clock type and u is a unit 
+## number in the range 0-3. 
+##
+## Most of these clocks require support in the form of a 
+## serial port or special bus peripheral. The particular  
+## device is normally specified by adding a soft link 
+## /dev/device-u to the particular hardware device involved, 
+## where u correspond to the unit number above. 
+## 
+## Generic DCF77 clock on serial port (Conrad DCF77)
+## Address:     127.127.8.u
+## Serial Port: /dev/refclock-u
+##  
+## (create soft link /dev/refclock-0 to the particular ttyS?)
+##
+# server 127.127.8.0 mode 5 prefer
+
+##
+## Undisciplined Local Clock. This is a fake driver intended for backup
+## and when no outside source of synchronized time is available.
+##
+# server 127.127.1.0		# local clock (LCL)
+# fudge  127.127.1.0 stratum 10	# LCL is unsynchronized
+
+##
+## Add external Servers using
+## # rcntpd addserver <yourserver>
+## The servers will only be added to the currently running instance, not
+## to /etc/ntp.conf.
+##
+{% if pools %}# pools
+{% endif %}
+{% for pool in pools -%}
+pool {{pool}} iburst
+{% endfor %}
+{%- if servers %}# servers
+{% endif %}
+{% for server in servers -%}
+server {{server}} iburst
+{% endfor %}
+
+# Access control configuration; see /usr/share/doc/packages/ntp/html/accopt.html for
+# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
+# might also be helpful.
+#
+# Note that "restrict" applies to both servers and clients, so a configuration
+# that might be intended to block requests from certain clients could also end
+# up blocking replies from your own upstream servers.
+
+# By default, exchange time with everybody, but don't allow configuration.
+restrict -4 default notrap nomodify nopeer noquery
+restrict -6 default notrap nomodify nopeer noquery
+
+# Local users may interrogate the ntp server more closely.
+restrict 127.0.0.1
+restrict ::1
+
+# Clients from this (example!) subnet have unlimited access, but only if
+# cryptographically authenticated.
+#restrict 192.168.123.0 mask 255.255.255.0 notrust
+
+##
+## Miscellaneous stuff
+##
+
+driftfile /var/lib/ntp/drift/ntp.drift # path for drift file
+
+logfile   /var/log/ntp		# alternate log file
+# logconfig =syncstatus + sysevents
+# logconfig =all
+
+# statsdir /tmp/		# directory for statistics files
+# filegen peerstats  file peerstats  type day enable
+# filegen loopstats  file loopstats  type day enable
+# filegen clockstats file clockstats type day enable
+
+#
+# Authentication stuff
+#
+keys /etc/ntp.keys		# path for keys file
+trustedkey 1			# define trusted keys
+requestkey 1			# key (7) for accessing server variables
+controlkey 1			# key (6) for accessing server variables
+