add ntp config module

Add support for installing and configuring ntp service, exposing the
minimum config of servers or pools to be added. If none are defined
then fallback on generating a list of pools by distro hosted at
pool.ntp.org (which matches what's found in the default ntp.conf
shipped in the respective distro).

1 files changed, 75 insertions, 0 deletions

diff --git a/templates/ntp.conf.ubuntu.tmpl b/templates/ntp.conf.ubuntu.tmpl
new file mode 100644
index 00000000..862a4fbd
--- /dev/null
+++ b/templates/ntp.conf.ubuntu.tmpl
@@ -0,0 +1,75 @@
+## template:jinja
+
+# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
+
+driftfile /var/lib/ntp/ntp.drift
+
+# Enable this if you want statistics to be logged.
+#statsdir /var/log/ntpstats/
+
+statistics loopstats peerstats clockstats
+filegen loopstats file loopstats type day enable
+filegen peerstats file peerstats type day enable
+filegen clockstats file clockstats type day enable
+
+# Specify one or more NTP servers.
+
+# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
+# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
+# more information.
+{% if pools %}# pools
+{% endif %}
+{% for pool in pools -%}
+pool {{pool}} iburst
+{% endfor %}
+{%- if servers %}# servers
+{% endif %}
+{% for server in servers -%}
+server {{server}} iburst
+{% endfor %}
+
+# Use Ubuntu's ntp server as a fallback.
+# pool ntp.ubuntu.com
+
+# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
+# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
+# might also be helpful.
+#
+# Note that "restrict" applies to both servers and clients, so a configuration
+# that might be intended to block requests from certain clients could also end
+# up blocking replies from your own upstream servers.
+
+# By default, exchange time with everybody, but don't allow configuration.
+restrict -4 default kod notrap nomodify nopeer noquery limited
+restrict -6 default kod notrap nomodify nopeer noquery limited
+
+# Local users may interrogate the ntp server more closely.
+restrict 127.0.0.1
+restrict ::1
+
+# Needed for adding pool entries
+restrict source notrap nomodify noquery
+
+# Clients from this (example!) subnet have unlimited access, but only if
+# cryptographically authenticated.
+#restrict 192.168.123.0 mask 255.255.255.0 notrust
+
+
+# If you want to provide time to your local subnet, change the next line.
+# (Again, the address is an example only.)
+#broadcast 192.168.123.255
+
+# If you want to listen to time broadcasts on your local subnet, de-comment the
+# next lines.  Please do this only if you trust everybody on the network!
+#disable auth
+#broadcastclient
+
+#Changes recquired to use pps synchonisation as explained in documentation:
+#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
+
+#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
+#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
+
+#server 127.127.22.1                   # ATOM(PPS)
+#fudge 127.127.22.1 flag3 1            # enable PPS API
+