1 files changed, 128 insertions, 0 deletions
diff --git a/doc/rtd/topics/boot.rst b/doc/rtd/topics/boot.rst
new file mode 100644
index 00000000..9d42336c
--- /dev/null
+++ b/doc/rtd/topics/boot.rst
@@ -0,0 +1,128 @@
+***********
+Boot Stages
+***********
+In order to be able to provide the functionality that it does, cloud-init
+must be integrated into the boot in fairly controlled way.
+
+There are 5 stages.
+
+1. **Generator**
+2. **Local**
+3. **Network**
+4. **Config**
+5. **Final**
+
+Generator
+=========
+When booting under systemd, a
+`generator <https://www.freedesktop.org/software/systemd/man/systemd.generator.html>`_
+will run that determines if cloud-init.target should be included in the
+boot goals.  By default, this generator will enable cloud-init.  It will
+not enable cloud-init if either:
+
+ * A file exists: ``/etc/cloud/cloud-init.disabled``
+ * The kernel command line as fond in /proc/cmdline contains ``cloud-init=disabled``.
+   When running in a container, the kernel command line is not honored, but
+   cloud-init will read an environment variable named ``KERNEL_CMDLINE`` in
+   its place.
+
+This mechanism for disabling at runtime currently only exists in systemd.
+
+Local
+=====
+ * **systemd service**: ``cloud-init-local.service``
+ * **runs**: As soon as possible with / mounted read-write.
+ * **blocks**: as much of boot as possible, *must* block network bringup.
+ * **modules**: none
+
+The purpose of the local stage is:
+ * locate "local" data sources.
+ * apply networking configuration to the system (including "Fallback")
+
+In most cases, this stage does not do much more than that.  It finds the
+datasource and determines the network configuration to be used.  That
+network configuration can come from:
+
+ * the datasource
+ * fallback: Cloud-init's fallback networking consists of rendering the
+   equivalent to "dhcp on eth0", which was historically the most popular
+   mechanism for network configuration of a guest.
+ * none.  network configuration can be disabled entirely with 
+   config like the following in /etc/cloud/cloud.cfg: 
+   '``network: {config: disabled}``'.
+
+If this is an instance's first boot, then the selected network configuration
+is rendered.  This includes clearing of all previous (stale) configuration
+including persistent device naming with old mac addresses.
+
+This stage must block network bring-up or any stale configuration might
+already have been applied.  That could have negative effects such as DCHP
+hooks or broadcast of an old hostname.  It would also put the system in
+an odd state to recover from as it may then have to restart network
+devices.
+
+Cloud-init then exits and expects for the continued boot of the operating
+system to bring network configuration up as configured.
+
+**Note**: In the past, local data sources have been only those that were
+available without network (such as 'ConfigDrive').  However, as seen in
+the recent additions to the DigitalOcean datasource, even data sources
+that require a network can operate at this stage.
+
+Network
+=======
+ * **systemd service**: ``cloud-init.service``
+ * **runs**: After local stage and configured networking is up.
+ * **blocks**: As much of remaining boot as possible.
+ * **modules**: ``init_modules``
+
+This stage requires all configured networking to be online, as it will fully
+process any user-data that is found.  Here, processing means:
+
+ * retrive any ``#include`` or ``#include-once`` (recursively) including http
+ * uncompress any compressed content
+ * run any part-handler found.
+
+This stage runs the ``disk_setup`` and ``mounts`` modules which may partition
+and format disks and configure mount points (such as in /etc/fstab).
+Those modules cannot run earlier as they may receive configuration input
+from sources only available via network.  For example, a user may have
+provided user-data in a network resource that describes how local mounts
+should be done.
+
+On some clouds such as Azure, this stage will create filesystems to be
+mounted, including ones that have stale (previous instance) references in
+/etc/fstab. As such, entries /etc/fstab other than those necessary for
+cloud-init to run should not be done until after this stage.
+
+A part-handler will run at this stage, as will boothooks including
+cloud-config ``bootcmd``.  The user of this functionality has to be aware
+that the system is in the process of booting when their code runs.
+
+Config
+======
+ * **systemd service**: ``cloud-config.service``
+ * **runs**: After network stage.
+ * **blocks**: None.
+ * **modules**: ``config_modules``
+
+This stage runs config modules only.  Modules that do not really have an
+effect on other stages of boot are run here.
+
+
+Final
+=====
+ * **systemd service**: ``cloud-final.service``
+ * **runs**: As final part of boot (traditional "rc.local")
+ * **blocks**: None.
+ * **modules**: ``final_modules``
+
+This stage runs as late in boot as possible.  Any scripts that a user is
+accustomed to running after logging into a system should run correctly here.
+Things that run here include
+
+ * package installations
+ * configuration management plugins (puppet, chef, salt-minion)
+ * user-scripts (including ``runcmd``).
+
+.. vi: textwidth=78