diff options
Diffstat (limited to 'doc/rtd/topics')
| -rw-r--r-- | doc/rtd/topics/datasources/ec2.rst | 19 |
1 files changed, 19 insertions, 0 deletions
diff --git a/doc/rtd/topics/datasources/ec2.rst b/doc/rtd/topics/datasources/ec2.rst index a90f3779..1c3a880f 100644 --- a/doc/rtd/topics/datasources/ec2.rst +++ b/doc/rtd/topics/datasources/ec2.rst @@ -42,6 +42,7 @@ Note that there are multiple versions of this data provided, cloud-init by default uses **2009-04-04** but newer versions can be supported with relative ease (newer versions have more data exposed, while maintaining backward compatibility with the previous versions). +Version **2016-09-02** is required for secondary IP address support. To see which versions are supported from your cloud provider use the following URL: @@ -80,6 +81,15 @@ The settings that may be configured are: * **timeout**: the timeout value provided to urlopen for each individual http request. This is used both when selecting a metadata_url and when crawling the metadata service. (default: 50) + * **apply_full_imds_network_config**: Boolean (default: True) to allow + cloud-init to configure any secondary NICs and secondary IPs described by + the metadata service. All network interfaces are configured with DHCP (v4) + to obtain an primary IPv4 address and route. Interfaces which have a + non-empty 'ipv6s' list will also enable DHCPv6 to obtain a primary IPv6 + address and route. The DHCP response (v4 and v6) return an IP that matches + the first element of local-ipv4s and ipv6s lists respectively. All + additional values (secondary addresses) in the static ip lists will be + added to interface. An example configuration with the default values is provided below: @@ -90,6 +100,7 @@ An example configuration with the default values is provided below: metadata_urls: ["http://169.254.169.254:80", "http://instance-data:8773"] max_wait: 120 timeout: 50 + apply_full_imds_network_config: true Notes ----- @@ -102,4 +113,12 @@ Notes The check for the instance type is performed by is_classic_instance() method. + * For EC2 instances with multiple network interfaces (NICs) attached, dhcp4 + will be enabled to obtain the primary private IPv4 address of those NICs. + Wherever dhcp4 or dhcp6 is enabled for a NIC, a dhcp route-metric will be + added with the value of ``<device-number + 1> * 100`` to ensure dhcp + routes on the primary NIC are preferred to any secondary NICs. + For example: the primary NIC will have a DHCP route-metric of 100, + the next NIC will be 200. + .. vi: textwidth=78 |