diff options
Diffstat (limited to 'templates/ntp.conf.opensuse.tmpl')
| -rw-r--r-- | templates/ntp.conf.opensuse.tmpl | 88 |
1 files changed, 88 insertions, 0 deletions
diff --git a/templates/ntp.conf.opensuse.tmpl b/templates/ntp.conf.opensuse.tmpl new file mode 100644 index 00000000..f3ab565f --- /dev/null +++ b/templates/ntp.conf.opensuse.tmpl @@ -0,0 +1,88 @@ +## template:jinja + +## +## Radio and modem clocks by convention have addresses in the +## form 127.127.t.u, where t is the clock type and u is a unit +## number in the range 0-3. +## +## Most of these clocks require support in the form of a +## serial port or special bus peripheral. The particular +## device is normally specified by adding a soft link +## /dev/device-u to the particular hardware device involved, +## where u correspond to the unit number above. +## +## Generic DCF77 clock on serial port (Conrad DCF77) +## Address: 127.127.8.u +## Serial Port: /dev/refclock-u +## +## (create soft link /dev/refclock-0 to the particular ttyS?) +## +# server 127.127.8.0 mode 5 prefer + +## +## Undisciplined Local Clock. This is a fake driver intended for backup +## and when no outside source of synchronized time is available. +## +# server 127.127.1.0 # local clock (LCL) +# fudge 127.127.1.0 stratum 10 # LCL is unsynchronized + +## +## Add external Servers using +## # rcntpd addserver <yourserver> +## The servers will only be added to the currently running instance, not +## to /etc/ntp.conf. +## +{% if pools %}# pools +{% endif %} +{% for pool in pools -%} +pool {{pool}} iburst +{% endfor %} +{%- if servers %}# servers +{% endif %} +{% for server in servers -%} +server {{server}} iburst +{% endfor %} + +# Access control configuration; see /usr/share/doc/packages/ntp/html/accopt.html for +# details. The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions> +# might also be helpful. +# +# Note that "restrict" applies to both servers and clients, so a configuration +# that might be intended to block requests from certain clients could also end +# up blocking replies from your own upstream servers. + +# By default, exchange time with everybody, but don't allow configuration. +restrict -4 default notrap nomodify nopeer noquery +restrict -6 default notrap nomodify nopeer noquery + +# Local users may interrogate the ntp server more closely. +restrict 127.0.0.1 +restrict ::1 + +# Clients from this (example!) subnet have unlimited access, but only if +# cryptographically authenticated. +#restrict 192.168.123.0 mask 255.255.255.0 notrust + +## +## Miscellaneous stuff +## + +driftfile /var/lib/ntp/drift/ntp.drift # path for drift file + +logfile /var/log/ntp # alternate log file +# logconfig =syncstatus + sysevents +# logconfig =all + +# statsdir /tmp/ # directory for statistics files +# filegen peerstats file peerstats type day enable +# filegen loopstats file loopstats type day enable +# filegen clockstats file clockstats type day enable + +# +# Authentication stuff +# +keys /etc/ntp.keys # path for keys file +trustedkey 1 # define trusted keys +requestkey 1 # key (7) for accessing server variables +controlkey 1 # key (6) for accessing server variables + |