summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-10-04releasing package cloud-init version 0.7.8-14-g94fd35e-0ubuntu1Scott Moser
2016-10-04update changelog (new upstream snapshot 0.7.8-14-g94fd35e).Scott Moser
2016-10-04merge from master at 0.7.8-14-g94fd35eScott Moser
2016-10-04systemd: run cloud-init.service Before dbus.serviceScott Moser
This is the best work around we have for an issue seen when dns is used during cloud-init.service on a system that is configured in nsswitch to use systemd-resolved. The problem is that cloud-init.service was blocking basic.target, and dbus would not be available until after cloud-init.service finished. LP: #1629797
2016-10-04unittests: fix use of mock 2.0 'assert_called' when running make checkRyan Harper
Some of the new DigitalOcean unittests were written to use 'assert_called', which is only available in mock versions 2.0. Because of this, the failure would only occur in releases less than yakkety and not in 'tox'. Add a 'xenial' entry to tox.ini with versions from xenial.
2016-09-30Improve module documentation and doc cleanup.Wesley Wiedenmeier
This adds lots of config module documentation in a standard format. It will greatly improve the content at readthedocs. Additionally: * Add a 'doc' env to tox.ini * Changed default highlight language for sphinx conf from python to yaml most examples in documentation are yaml configs * Updated datasource examples to highlight sh code properly
2016-09-29releasing package cloud-init version 0.7.8-11-g02f6c4b-0ubuntu1Scott Moser
2016-09-29update changelog (new upstream snapshot 0.7.8-11-g02f6c4b).Scott Moser
2016-09-29merge from master at 0.7.8-11-g02f6c4bScott Moser
2016-09-29lxd: Update network config for LXD 2.3Stéphane Graber
Prior to LXD 2.3, the bridge configuration was done through distro packaging. Thus, lxd module interacted with debconf. With 2.3 and higher, this is now done inside LXD itself, so we need to use "lxc network" there. For now, this perfectly matches what we had before with debconf and doesn't cover any of the new options. We can always add those later. A set of tests similar to what we had for debconf has been added to make sure things look good. This is tested in Yakkety container running LXD 2.3 and all options seem to be passed through as expected, giving me the bridge I defined. Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
2016-09-29DigitalOcean: use meta-data for network configruationBen Howard
On DigitalOcean, Network information is provided via Meta-data. It changes the datasource to be a local datasource, meaning it will run before fallback networking is configured. The advantage of that is that before networking is configured it can bring up a network device with ipv4 link-local and hit the metadata service that lives at 169.254.169.254 to find its networking configuration. It then takes down the link local address and lets cloud-init configure networking. The configuring of a network device to go looking for a metadata service is gated by a check of data in the smbios. This guarantees that the code will not run on another system.
2016-09-28ntp: move to run after apt configurationScott Moser
since ntp module may try to install packages, it needs to run after apt is configured. LP: #1628337
2016-09-23releasing package cloud-init version 0.7.8-8-g0439d8a-0ubuntu1Scott Moser
2016-09-23update changelog (new upstream snapshot 0.7.8-8-g0439d8a).Scott Moser
2016-09-23merge from master at 0.7.8-8-g0439d8aScott Moser
2016-09-21Decode unicode types in decode_binaryRobert Schweikert
The test in decode_binary for six.text_type was incorrect as that includes unicode type in Python 2 which should actually be decoded. When the type is string_types we now properly check only for basestring and str in Python 2 and Python 3 respectively and return the given blob without making an attempt to decode.
2016-09-21systemd: Ensure that cloud-init-local happens before NetworkManagerJoshua Harlow
2016-09-21Allow ephemeral drive to be unpartitionedPaul Meyer
If device has no partition table, the first line of output from `sgdisk -p <device>` will be "Creating new GPT entries.", instead of something like "Disk /dev/sdb: 266338304 sectors, 127.0 GiB". Also, protect against localized output by adjusting subp calls that parse sgdisk output to set LANG=C.
2016-09-21subp: add 'update_env' argumentScott Moser
In order for a caller to use 'env' argument of subp, they will realistically do: env = os.environ.copy() env['FOO'] = 'BZR' subp(cmd, env=env) This shortens that to be: subp(cmd, update_env={'FOO': 'BZR'}) Add tests, and update growpart tests to use mock when playing with os.environ.
2016-09-21releasing package cloud-init version 0.7.8-4-g970dbd1-0ubuntu1Scott Moser
2016-09-21update changelog (new upstream snapshot 0.7.8-4-g970dbd1).Scott Moser
2016-09-21merge from master at 0.7.8-4-g970dbd1Scott Moser
2016-09-21net: support reading ipv6 dhcp config from initramfsLaMont Jones
This adds support for understanding 'dhcp6' as a protocol that can be written into /run/net-IFACE.cfg files by the initramfs. The end result is supporting ipv6 dhcp from initramfs boot all the way into iscsi root. LP: #1621615, #1621507
2016-09-20releasing package cloud-init version 0.7.8-3-g80f5ec4-0ubuntu1Scott Moser
2016-09-20update changelog (new upstream snapshot 0.7.8-3-g80f5ec4).Scott Moser
2016-09-20merge from master at 0.7.8-3-g80f5ec4Scott Moser
2016-09-20Adjust mounts and disk configuration for systemd.Scott Moser
The end result of all of these changes is to get mounts managed by cloud-init to occur only after cloud-init.service is done. We need to do that so that filesystems that are set up by cloud-init (in disk_setup) do not get mounted by stale entries in /etc/fstab before the setup occurs. This can occur in 2 ways: a.) new instance with old /etc/fstab b.) same instance where disk needs adjusting (Azure resize will re-format the ephemeral disk). The list of changes here is: - move mounts and disk_setup module to cloud-init.service rather than config. cloud-init.service runs earlier in boot so it can get those mount points done earlier. - on systemd add 'x-systemd.requires=cloud-init.service' to fstab options - cloud-init-local.service: add Before=basic.target - cloud-init.service: - extend After, Before, and Wants to multiple lines rather than one long line. - sort consistently with cloud-init-local.service - add DefaultDependencies=no - add Before=default.target - add Conflicts=shutdown.target LP: #1611074
2016-09-15dmidecode: run dmidecode only on i?86 or x86_64 arch.Robert Schweikert
Dmidecode is not going to run successfully on anything other than an x86 or x86_64, just avoid running it anywhere else.
2016-09-15releasing package cloud-init version 0.7.8-1-g3705bb5-0ubuntu1Scott Moser
2016-09-15update changelog (new upstream snapshot 0.7.8-1-g3705bb5).Scott Moser
2016-09-15merge from master at 0.7.8-1-g3705bb5Scott Moser
2016-09-15systemd: put cloud-init.target After multi-user.targetScott Moser
When we moved cloud-final.service to run After multi-user.target it caused a dependency loop (as cloud-init.target was still implied to be Before multi-user.target). journalctl would either show: cloud-init.target: Breaking ordering cycle by deleting job cloud-final.service/start or multi-user.target: Breaking ordering cycle by deleting job cloud-init.target/start The fix here is to clearly state that cloud-init.target is also After multi-user.target LP: #1623868
2016-09-12release 0.7.8Scott Moser
Bump the version in cloudinit/version.py to be 0.7.8.
2016-09-12releasing package cloud-init version 0.7.7-31-g65ace7b-0ubuntu1Scott Moser
2016-09-12update changelog (new upstream snapshot 0.7.7-31-g65ace7b).Scott Moser
2016-09-12merge from master at 0.7.7-31-g65ace7bScott Moser
2016-09-12Allow link type of null in network_data.jsonJon Grimm
Treat null type as yet another physical type, seen in real-world openstack cloud. Also, support the case where network_data.json provides mac addresses in upper case. Rackspace public cloud currently does that. LP: #1621968
2016-09-12DataSourceOVF: fix user-data as base64 with python3Scott Moser
When user-data was provided in the ovf environment python3 would call base64.decodestring() with a string rather than bytes and an exception would occur. This fixes the broken path and adds unit test. Also changes to return None rather than empty string when there is no user-data and when there is user-data return that as bytes instead of string. LP: #1619394
2016-09-12remove obsolete .bzrignoreScott Moser
2016-09-09releasing package cloud-init version 0.7.7-28-g34a26f7-0ubuntu2Scott Moser
2016-09-09update changelogScott Moser
2016-09-09debian/control: fix missing dependency on python3-serialScott Moser
Add python3-serial to Depends. This is not resolved by ${python3:Depends} because it is commented out in requirements.txt. pyserial is problematic both because it is not pure python and because it is not available for python2.6. The commit 26ea813d2 removed pyserial and thus lost the automatic dependency. This makes SmartOS datasource work.
2016-09-09releasing package cloud-init version 0.7.7-28-g34a26f7-0ubuntu1Scott Moser
2016-09-09update changelog (new upstream snapshot 0.7.7-28-g34a26f7).Scott Moser
2016-09-09merge from master at 0.7.7-28-g34a26f7Scott Moser
2016-09-09systemd: Better support package and upgrade.Scott Moser
In systemd, package installation before the system is fully booted (systemctl is-system-running == starting) may result in the package not being started. Upgrade (package_upgrade: true) can also cause failure if that is done during systemd boot. The solution here is: a.) move config modules that do or may do package installation to 'final_modules'. That list is: - snappy - package-update-upgrade-install - fan - landscape - lxd - puppet - chef - salt-minion - mcollective b.) move cloud-final.service to run as 'Type=idle' LP: #1576692, #1621336
2016-09-08tests: cleanup tempdirs in apt_source testsScott Moser
test_handler_apt_source_v3.py was not cleaning up all its tmp dirs.
2016-09-08releasing package cloud-init version 0.7.7-26-g058dd75-0ubuntu1Scott Moser
2016-09-08update changelog (new upstream snapshot 0.7.7-26-g058dd75).Scott Moser
2016-09-08merge from master at 0.7.7-26-g058dd75Scott Moser
generated by cgit v1.2.3 (git 2.39.1) at 2025-03-23 11:23:04 +0000